Ahmed Sabaawi

Dr. Ahmed Sabaawi


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2013 in IEEE Journal of Selected Topics in Quantum Electronics
Verified
Journal Article
Closed access
ASAhmed Sabaawi
Ahmed Sabaawi
CTC. C. Tsimenidis
C. C. Tsimenidis
BSB. S. Sharif
B. S. Sharif
In this paper, an investigation is presented into infrared nanoantennas for solar energy harvesting at 10-μm wavelength, where considerable solar energy is available. These antennas have been modeled using both the integral equation model and the circuit model. The method of moments has been utilized to solve Hallen's and Pocklington's integral equations to find the current distribution over the antenna surface by considering the conductivity and the dielectric properties of gold at this wavelength, as well as its effect on the antenna performance. For verification of the obtained results, this antenna has been simulated using a finite element method-based electromagnetic simulator and both results were found to be consistent. In addition, the metal/insulator/metal (MIM) diode has been studied and its equivalent circuit is presented. Furthermore, a solar rectenna has been constructed by overlapping the antenna arms over a small area to incorporate the MIM diode. The circuit of the solar rectenna, with mathematical expressions for the elements of the equivalent circuit, is demonstrated. Finally, a parametric study into the effect of the MIM diode on the captured voltage is conducted.

1 November 2011
Verified
Conference Paper
Closed access
ASAhmed Sabaawi
Ahmed Sabaawi
CTCharalampos C. Tsimenidis
Charalampos C. Tsimenidis
BSBayan S. Sharif
Bayan S. Sharif
In this paper, three nano-antennas have been designed: Dipole, Spiral, and Bow-tie infra-red (IR) antennas for solar energy collection. A performance comparison between these designs is presented to find the optimum solution to this application. The main goal of this study is to design and optimize nano-antennas for maximum solar and earth radiation energy conversion in the mid-IR region. The nano-antennas are simulated using COMSOL Multiphysics based on Finite element Method (FEM). The results demonstrate that the converted electric field in spiral nano-antennas is larger than that in bow-tie and dipole nano-antennas. Furthermore, it is shown that the bow-tie nano-antenna exhibits a wider bandwidth when compared to the other types and that its electric field can be enhanced by coupling more bow-tie elements to form an array.

22 August 2013 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
ASAhmed Sabaawi
Ahmed Sabaawi
CTCharalampos C. Tsimenidis
Charalampos C. Tsimenidis
BSBayan S. Sharif
Bayan S. Sharif
In this paper, an investigation is presented into nanogap-based bowtie nanoarrays for THz energy detection, with the aim of optimizing their geometrical parameters utilizing finite-element method (FEM) based simulations. The bowtie elements of the array are connected by feeding lines, which are used to transfer the captured electric field away from the antenna's center to a common feeding gap. The performance of the bowtie nanoarray has been compared with a single bowtie element constructed using the same device area. The obtained results demonstrated that the array outperforms the single element bowtie. Subsequently, a parametric study is carried out on important geometrical parameters of the array to optimize its performance. The results demonstrate that the optimum spacing between array elements is 2.9 m, whereas the best line width of the feeding lines is 50 nm. Additionally, it has been found that a 25 nm gap offers the highest electric field at resonance. Furthermore, a bowtie nanoarray is designed based on the optimized parameters of the parametric study. Finally, the effects of the incident angle and curvature of the edges of the array elements and feeding lines have also been studied and their impact on the overall performance is presented in this paper.

1 January 2022 in Indonesian Journal of Electrical Engineering and Computer Science
Verified
Journal Article
Open access
PDF file
OSOras Ahmed Shareef
Oras Ahmed Shareef
ASAhmed Sabaawi
Ahmed Sabaawi
EMEng. Karrar S. Muttair
Eng. Karrar S. Muttair
MMMahmood Farhan Mosleh
Mahmood Farhan Mosleh
MAMohammad Bashir Almashhdany
Mohammad Bashir Almashhdany
The design of a millimeter wave (mmW) antenna for the 5G mobile applications is presented in this paper. The designed antenna has dimensions of 10×10×0.245 mm3. This includes the copper ground plane. The resonance of the proposed mmW antenna lies within the range of 33 GHz and 43 GHz. These frequency bands are covering the 5G proposed band in terms of the signal speed, data transmission, and high spectral efficiencies. Computer simulation technology (CST) software is used to simulate the proposed 5G antenna including the characteristics of S-parameters, gain, and radiation pattern. Simulation results show that the return loss at resonant frequencies goes -22 dB, which satisfies the requirements of 5G mobile technology.

1 April 2017
Verified
Conference Paper
Closed access
FAFrederic Andre
Frederic Andre
SKSophie Kohler
Sophie Kohler
Viktor KrozerViktor Krozer
Viktor Krozer
QLQuang Trung Le
Quang Trung Le
RLRosa Letizia
Rosa Letizia
RZRalph Zimmerman
Ralph Zimmerman
The W-band (92-95 GHz) Traveling Wave Tube enabling the first Point to multipoint millimeter wave backhaul wireless network is in final phase of fabrication. The challenge is to build a TWT suitable for large volume fabrication to satisfy the cost constraints of network operators. Performances are targeted to provide coverage on sectors up to 90° with 1 km range. Simulations demonstrate a bandwidth of operation in excess of 5 GHz with a saturated output power of 40 W. The TWT is directly connected to a sector horn antenna.

1 March 2012
Verified
Conference Paper
Closed access
ASAhmed Sabaawi
Ahmed Sabaawi
CTC. C. Tsimenidis
C. C. Tsimenidis
BSB. S. Sharif
B. S. Sharif
In this paper, a study is conducted into nanogap-based, bowtie nano-array for solar energy collection, with the aim of optimizing its geometrical parameters utilizing Finite Element Method (FEM) based simulations. The optimization parameters include the metal thickness and the gap size, where it is found that the optimal metal thickness is 95 nm. The proposed optimized bowtie nano-array has been integrated with a metal-insulator-metal (MIM) diode to construct a rectenna for solar radiation rectification at 37.5 μm wavelength. The characteristics of the MIM diode have been analyzed and discussed. Finally, the effect of the incident angle on the rectenna performance has been investigated.