Yonghun Kim

Prof. Yonghun Kim


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 October 2021 in Energies
Verified
Journal Article
Open access
PDF file
SLSun Lim
Sun Lim
SKSeok-Kyoon Kim
Seok-Kyoon Kim
YKYonghun Kim
Yonghun Kim
With regard to DC/DC buck converter applications, the objective of this study is to expand the admissible range of the output voltage cut-off frequency while lowering the steady-state current cut-off frequency as possible. This study fortifies the inner loop by incorporating the novel subsystems such as an auto-tuner (for the dynamic current cut-off frequency) and active damping injection invoking the pole-zero cancellation nature with the particular designed feedback gain structure. The outer loop active damping control renders the closed-loop speed transfer function to be a first-order low-pass filter with the cooperation of the specially structured design parameters; in addition, it provides time-varying disturbance attenuation. The experimental results obtained for a 3-kW buck converter validate the feasibility of the proposed technique by showing a 34% performance enhancement (at least) compared with the recent active damping controller.

27 June 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YKYonghun Kim
Yonghun Kim
SKSeok-Kyoon Kim
Seok-Kyoon Kim
Jianxing LiuJianxing Liu
Jianxing Liu
JQJianbin Qiu
Jianbin Qiu
Choon Ki AhnChoon Ki Ahn
Choon Ki Ahn
This article presents an advanced observer-based cascade-type output-feedback controller eliminating the current loop and lowers the dependence level of the open-loop system for dc/dc power converters. The proposed solution provides several features: first, a model-free pole-zero cancellation observer for the estimation of the output-voltage derivative to ensure that the implementations of the inner and outer loop are feasible; second, an intelligent mechanism establishing a flexible inner-loop feedback gain level according to the transient and steady-state periods, and third, an observer and intelligent inner loop mechanism-based, output-voltage derivative stabilization along the first-order system achieved by the active damping injection technique by pole-zero cancellation. A 3-kW dc/dc boost converter with a 32-bit digital signal processor demonstrates the effectiveness of the proposed technique.

21 December 2023 in Actuators
Verified
Journal Article
Open access
PDF file
YKYonghun Kim
Yonghun Kim
HYHyunho Ye
Hyunho Ye
SLSun Lim
Sun Lim
SKSeok-Kyoon Kim
Seok-Kyoon Kim
This study designs an advanced single-loop output feedback system for speed servo drive applications, in which a simple proportional–integral–integral (PII) controller equipped with nonlinear feedback and feed-forward gains is formed. The resultant feedback system shows the desired critically damped performance for wide-operating regions by actively handling the system parameter and load uncertainties. There are three contributions: first, the third-order observer estimates, independent from the system model, where the speed and acceleration are obtained using the position measurement with the order reduction property; second, the observer-based PII controller is compensated by active damping with a nonlinearly structured feedback and feed-forward gains; and, third, a guarantee is achieved on the desired critically damped performance through a closed-loop analysis. A hardware testbed that adopts a 500 W brushless DC motor is used to experimentally demonstrate performance improvements over certain constant torque regions under various scenarios.

13 November 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
SKSeok-Kyoon Kim
Seok-Kyoon Kim
YKYonghun Kim
Yonghun Kim
WZWei Xing Zheng
Wei Xing Zheng
Choon Ki AhnChoon Ki Ahn
Choon Ki Ahn
This paper designs a novel adaptive speed and acceleration observer, incorporating a low-pass filter (LPF) as an auxiliary system, which is independent of the system model of the exact parameter values and load information of the motor, based on the motor drive position measurement. The contributions of this paper are given as follows: first, an incorporation of LPF into the proposed observer to eliminate the high-frequency noises of the measurements, second, the collaboration of the nonlinearly structured observer gain and special coordinate transformation to make the adaptive observer design possible with the error dynamics diagonalization by the pole-zero cancellation, and, third, the adaptive system as another subsystem to secure the improved robustness against the low-frequency noises of the measurement. The experimental verification highlights the practical advantages of the proposed adaptive observer based on a 500-W electric motor drive system as a prototype under various loads.

12 November 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
SKSeok-Kyoon Kim
Seok-Kyoon Kim
YKYonghun Kim
Yonghun Kim
Choon Ki AhnChoon Ki Ahn
Choon Ki Ahn
The proposed model-free adaptive observer estimates the speed, acceleration, and low-frequency disturbance for servo drives based on a second-order order-reduction technique, which ensures consistent dynamic performance and is independent of the servo system model and load information. The contributions of this article are twofold: 1) the combination of a coordinate transformation and special gain structure diagonalizes the observation error dynamics to render the performance tuning process more convenient; and 2) an extra adaptation mechanism estimates the low-frequency disturbance to improve the closed-loop robustness according to the output filtering error. A 500-W prototype servo drive validates the effectiveness of the proposed estimation technique by incorporating a feedback system application.

4 April 2024 in Energies
Verified
Journal Article
Open access
PDF file
HLHosik Lee
Hosik Lee
YKYonghun Kim
Yonghun Kim
SKSeok-Kyoon Kim
Seok-Kyoon Kim
This article presents a proportional–derivative (PD) type output voltage regulator without the current feedback, taking into account system parameter and load variations. The main advantages are given as follows: First, the first-order output voltage derivative observer is developed without the requirement of system parameter information, which makes it possible to stabilize the system without current sensing. Second, a simple self-tuner implements the feedback-loop adaptation by updating the desired dynamics accordingly. Third, the observer-based active damping injection for the PD-type controller results in the closed-loop system order reduction to 1 by the pole-zero cancellation, including the disturbance observer as a feed-forward term. The prototype uninterruptible power supply system comprised of a 3 kW three-phase inverter, inductors, and capacitors verifies the practical merits of the proposed technique for linear and nonlinear loads.