This article presents a proportional–derivative (PD) type output voltage regulator without the current feedback, taking into account system parameter and load variations. The main advantages are given as follows: First, the first-order output voltage derivative observer is developed without the requirement of system parameter information, which makes it possible to stabilize the system without current sensing. Second, a simple self-tuner implements the feedback-loop adaptation by updating the desired dynamics accordingly. Third, the observer-based active damping injection for the PD-type controller results in the closed-loop system order reduction to 1 by the pole-zero cancellation, including the disturbance observer as a feed-forward term. The prototype uninterruptible power supply system comprised of a 3 kW three-phase inverter, inductors, and capacitors verifies the practical merits of the proposed technique for linear and nonlinear loads.
Considering the nonlinear dynamics, this paper devises an advanced position trajectory tracking controller with a model-free filter for two-wheeled vehicle (TWV) applications. The proposed technique preserves a simple structure in the form of the proportional–integral (PI) controller involving the model-free filter and nonlinearly structured feedback gains, which make the following contributions: (a) the proposed filter smooths the position and yaw angle measurements according to the first-order convergence rate without any model information; and (b) the PI control with the nonlinearly structured feedback gains robustly stabilizes the position and yaw angle errors along the desired first-order system to accomplish the trajectory tracking mission, which is obtained by the pole-zero cancellation (PZC) in the presence of modeling errors. MATLAB/Simulink was used to emulate the resulting feedback system and validate the effectiveness of the proposed technique.