The automobile vehicles must be operated on fuel containing no more than 10% ethanol. Use of fuel having more than 10% ethanol may cause engine malfunction, starting and running issues, and material degradation. These negative impacts could cause irreversible damage to the vehicles. Therefore, ethanol mixing in petrol should be controlled below 10% level. The current work is the first to report sensing of ethanol mixing in petrol with reference to the variation in the DC electrical conductivity of polythiophene/graphitic-carbon nitride (PTh/gC3N4) nanocomposite. The in situ chemical oxidative method of polymerization was used for synthesizing PTh and PTh/gC3N4 nanocomposite. Fourier transform infrared spectroscopy (FT-IR), X-rays diffraction (XRD), thermo-gravimetric analysis (TGA), transmittance electron microscopy (TEM) as well as scanning electron microscopy (SEM) analysis were used for confirmation of the structure along with morphology of the PTh and PTh/gC3N4 nanocomposite. The thermal stability of DC electrical conductivity of PTh and PTh/gC3N4 nanocomposite were tested under isothermal and cyclic ageing condition. The sensing response of PTh and PTh/gC3N4 nanocomposite as a function of DC electrical conductivity were recorded in petrol and ethanol atmosphere. The sensing response of PTh/g-C3N4 nanocomposite in petrol atmosphere was 6.1 times higher than that of PTh with lower detection limit to 0.005 v/v% of ethanol prepared in n-hexane.
5 January 2022 in International Journal of Polymer Science
The in-situ polymerization technology was used to successfully produce nanostructured binary nanocomposites (NCs) made from a poly (3-nitrothiophen) matrix (P3NT) that were loaded effectively with nanoparticles (NPs) of silver titanium dioxide (AgTiO2), of varying percentages (10%, 20%, and 30%). A uniform coating of P3NT covers the AgTiO2 NPs. Various methods were performed to confirm the fabrication of the binary P3NT/AgTiO2 NCs adsorbents, such as FTIR, XRD, SEM, and EDX. Both dyes (brilliant green (B.G.) and crystal violet (C.V.)) were removed from liquid media by using the binary P3NT/AgTiO2 NCs. A range of batch adsorption studies was used to optimize various factors that impact the elimination of B.G. or C.V. dyes, including the pH, weight of the binary P3NT/AgTiO2 NC, proportion of AgTiO2 NP, time, and temperature. The pseudo-second-order kinetics ( ) was better adapted for the adsorption procedure’s empirical data whereby the maximum adsorption capacity of the C.V. dye was 43.10 mg/g and ( ) the maximum adsorption potential was 40.16 mg/g for B.G. dye, succeeded by the pseudo-second-order kinetics. Moreover, the adhesion of B.G. and C.V. pigments on the layers of NCs involves an endothermic reaction. In addition, the concocted adsorbent not only exhibited strong adsorption characteristics during four consecutive cycles but also possessed a higher potential for its reuse. According to the findings, the NCs might possibly be used as a robust and reusable adsorbent to remove B.G. and C.V. pigments from an aqueous medium.
A novel composite electrode material based on a Pb-based MOF and functionalized carbon nanotubes (FCNTs) is fabricated for a symmetrical supercapacitor device.
2 June 2022 in Critical Reviews in Analytical Chemistry
Conducting polymers (CPs) are conductive materials composed of organic polymers. CPs have excellent properties such as easy synthesis and effortless fabrication, tunable electrical property, high environmental stability, high mechanical and optical properties. These unique properties have attracted researchers to discover a wide variety of uses, such as batteries, solar cells, sensors, supercapacitors, electrochromic devices, and biochemical applications. Although CPs have many limitations in their pristine form, hybridization with other materials overcomes these limitations. Here in this review article, we discuss different CPs based chemosensors for colorimetric and fluorimetric detection and determination of noble metal ions (Ag+, Pd2+, Pt2+/4+, and Au3+) in different environmental, agricultural, and biological samples. Further, the sensing performances of these chemosensors have been compared and discussed. We hope this article will help the readers with the future design of CPs based optical sensor (colorimetric and fluorescent) for detecting noble metal cations.