The popularity of senior-friendly food has been increasing as the world enters the age of an aging society. It is required that senior-friendly food products are processed with the new concept of processing techniques that do not destroy the nutritional and sensory values. Ohmic heating can be an alternative to conventional heating methods for processing senior-friendly food with retaining excellent taste and quality because of less destruction of nutrients in the food. In this study, the ohmic–vacuum combination heating system was developed to process a multiphase type of senior-friendly food. Changes in physical and electrical properties of senior-friendly model foods were investigated depending on the experimental conditions such as vacuum pressure intensity and vacuum pretreatment time. Numerical simulations based on the experimental conditions were performed using COMSOL multiphysics. The ohmic–vacuum combination heating method with agitation reduced the heating time of the model food, and non-uniform temperature distribution in model food was successfully resolved due to the effect of vacuum and agitation. Furthermore, the difference was found in the hardness of solid particles depending on the vacuum treatment time and intensity after the heating treatment. The ohmic–vacuum combination heating system appeared effective when applying for the senior-friendly foods in multiphase form. The simulation results matched reasonably well with the experimental data, and the data predicted through simulation could save the cost and time of experimentation.
The processing of sprout vegetables in powder form has been known to extend the shelf-life by retaining nutritional values; however, sprout powder products were exposed to a variety of contaminants, such as microbial contaminants, during processing and storage. Therefore, the proper treatment for removing the contaminants in the powder was required without compromising their quality properties. This study was conducted (1) to determine a suitable pasteurization method for sprout barley powder, and (2) to investigate the effect of vacuum-steam heating combination treatment on the quality change and the lethality of microorganisms in sprout barley powder. The heating pattern of sprout barley powder was elucidated with a vacuum-thermal combination system consisting of a vacuum chamber, overhead stirrer, far-infrared heater, and PID (Proportional-Integral-Differential) controller. In addition, the mixing patterns of sprout barley powder, depending on the types of stirring blades, were evaluated by discrete element modeling using EDEM™ software. The vacuum-steam combination heating system was fabricated using the investigated pre-design factors. The quality change in sprout barely powder was evaluated by measuring the microbial inactivation, CIE values (L*, a*, b*, ΔE), and water activity (aw). During the pasteurization process, steam could be directly injected into the chamber at regular intervals for two hours to transfer moisture and heat to the powder. By combining steam and vacuum conditions, the population of E. coli O157:H7 in the powder was reduced by 4.33 log CFU/g, eliminating all E. coli O157:H7 in the powder. In addition, the water activity (aw) of the powder was significantly decreased in a vacuum pressure environment without the quality deterioration.
Eggs are a highly nutritious food; however, those are also fragile and susceptible to cracks, which can lead to bacterial contamination and economic losses. Traditional methods for detecting cracks, particularly in processed eggs, often fall short due to changes in the eggs’ physical properties during processing. This study was aimed at developing a novel device for detecting egg cracks using electric discharge phenomena. The system was designed to apply a high-voltage electric field to the eggs, where sparks were generated at crack locations due to the differences in electrical conductivity between the insulative eggshell and the more conductive inner membrane exposed by the cracks. The detection apparatus consisted of a custom-built high-voltage power supply, flexible electrode pins, and a rotation mechanism to ensure a complete 360-degree inspection of each egg. Numerical simulations were performed to analyze the distribution of the electric field and charge density, confirming the method’s validity. The results demonstrated that this system could efficiently detect cracks in both raw and processed eggs, overcoming the limitations of existing detection technologies. The proposed method offers high precision, reliability, and the potential for broader application in the inspection of various poultry products, representing a significant advancement in food safety and quality control.
Metallic contaminants in powdered foods represent a serious safety concern. Therefore, effective detection is crucial for food safety. This study aimed to develop an electric-field-based detection system and quantitatively evaluate its performance. An alternating (+/−) electrode array (gap 1–2 mm) was designed, and resonance analysis identified 15 kHz with a 2 mm gap as the optimal operating condition. Using an IGBT-based high-voltage source, 1.35 kV was selected to ensure stable operation without partial discharge. A real-time algorithm based on a minimum current-change threshold was implemented, and detection responses to stainless steel (SUS), aluminum (Al), and copper (Cu) particles in three size classes (<0.5, 0.5–1.0, and 1.0–2.0 mm) were evaluated using hit/miss modeling and logistic regression to obtain probability-of-detection (POD) curves and limits of detection (LOD). The system achieved POD ≥ 0.9 for 1.0–2.0 mm particles; in the 0.5–1.0 mm range, observed POD values were 84%, 90%, and 68% for SUS, Al, and Cu, respectively. Safety was assessed by COMSOL-based localized heating simulation validated by infrared thermography and by ozone monitoring for real-time operation. Compared with conventional inspection approaches, the proposed system provides a compact, cost-effective architecture while reporting inspection-oriented reliability metrics (POD/LOD) for process-line deployment.