We have introduced several factors that can be useful for the modeling and analysis of high-power Ti:sapphire laser amplifiers. The amplification model includes the phase distortion effect caused by the atomic phase shift (APS) in gain medium and the thermal-induced phase distortion effect caused by the high-average-power amplification. We have provided an accurate amplification model for the development of ultra-high-intensity and high-average-power lasers.
23 November 2020 in Journal of the Optical Society of America B
We conducted a study on the thermal effects in chirped volume Bragg gratings (CVBGs) used as optical compressors in high-power lasers. A simulation code was developed to predict the distortion of the pulses by the thermal effects. The types and significance of the thermal distortion were analyzed using an Yb:YAG laser with an average power of 250 W. The temperature distribution in the CVBG, the thermal lens effect, the beam propagation path changes due to the thermal lens, and the compression efficiency decrease due to the phase delay were analyzed. As a result, we predict that the peak power decreases to 63.9% due to the thermal effects under the operating conditions of 250 W. We also suggest new designs for the CVBG mount that minimize the peak power loss. We expect the peak power loss to be reduced only by 1.1% when using our new mount design for the CVBG.
25 July 2017 in Journal of the Korean Physical Society
We have derived modified Frantz-Nodvik equations that simultaneously account for atomic phase shift (APS) and gain depletion as the chirped laser pulse passes through a gain medium, and have analyzed the effect of temporal pulse distortion in a Ti:sapphire multipass amplifier chain. The combination of APS and gain depletion distorted a temporal pulse and decreased the peak power. The pulse width increased from 21.3 fs to 22.8 fs and the peak power reduced to 89% for the PW class Ti:sapphire CPA laser system in the particular conditions.
The optimization of solid-state laser cavities requires a deep understanding of the gain module, the most critical laser component. This study proposes a procedure for evaluating the performance of the solid-state laser gain module. The thermal effect and energy storage characteristics are the performance criteria. A normalized heating parameter was calculated as a quantitative indicator of the performance criteria. We proposed a method to quantify the heat dissipated into the gain medium using the wavefront distortion, thermal deformation theory of the gain medium, and the ray transfer matrix method. The suggested procedure was verified by evaluating the flashlamp type Nd:YAG rod gain module, but it can also even be extended to other solid-state laser gain modules by applying the appropriate thermal deformation theory.
8 January 2019 in Japanese Journal of Applied Physics
We propose the insertion of a saturable absorber (SA) in a nanosecond double-pass laser amplifier as an amplified spontaneous emission (ASE) suppressor. To analyze the influence of the SA, a theoretical model is developed. One-dimensional simulation results show reasonable agreement with measurements in terms of the output energy and temporal pulse shape. For our amplifier parameters, when an SA of initial transmission 0.5 is inserted, the simulation anticipates the ASE to be reduced by a factor of 0.37 while the output pulse energy is maintained.