We have designed a square-shaped beam homogenizer using a lens array for pumping a petawatt-class Ti:sapphire amplifier. The designed beam homogenizer generated a flat-top uniform square pump beam with 5.1% of edge steepness and 2.7% of RMS spatial uniformity, respectively. This pump beam generated an output beam with 74 J of energy and 56.8% of extraction efficiency, respectively. A scalar diffraction and two-dimensional amplification simulation were performed for optimization. The results indicate the possibility of improving an amplification efficiency and developing a compact square petawatt-class laser system.
1 July 2021 in Journal of the European Ceramic Society
We have introduced several factors that can be useful for the modeling and analysis of high-power Ti:sapphire laser amplifiers. The amplification model includes the phase distortion effect caused by the atomic phase shift (APS) in gain medium and the thermal-induced phase distortion effect caused by the high-average-power amplification. We have provided an accurate amplification model for the development of ultra-high-intensity and high-average-power lasers.
We performed an illumination simulation, wave-optical simulation, and experiment on a zoom homogenizer and conventional beam homogenizer. The wave-optical simulation was performed for each lenslet using the shifted angular spectrum method for effective memory use. In the experiment, the parameters of the zoom homogenizer and beam homogenizer at all zoom positions were set using a system matrix. The uniformity and peak effect of the beam homogenizer were 16.57% and 16.63%, respectively, but those of the zoom homogenizer were 7.15% and 1.46%, respectively. The illumination field generated by the zoom homogenizer had a higher uniformity and lower peak effect at all zoom positions than the conventional one.