The open-source program Delft Dashboard (DDB) is a graphical user interface designed to quickly create, edit input parameters and visualize model inputs for a number of hydrodynamic models, using private or publicly available local and global datasets. It includes a number of toolboxes that facilitate the generation of spatially varying inputs. These include new model schematizations (grids, bathymetry, boundary conditions, etc.), cyclonic wind fields and initial tsunami waves. The use of DDB can have significant benefits. It can save modellers considerable time and effort. Furthermore, the automated nature of both data collection and pre-processing within the program reduces the likelihood of errors that could occur when setting up models manually. Three case studies are presented: simulation of tides in the North Sea, storm surge and wave modelling under tropical cyclone conditions and the simulation of a tsunami. The test cases show that models created with DDB can be set up efficiently while maintaining a predictive skill that is only slightly lower than that of extensively calibrated models.
This study demonstrates the skills of D-FLOW Flexible Mesh (FM) and SFINCS (Super-Fast INundation of CoastS) in combination with the Delft Dashboard Tsunami Toolbox to numerically simulate tsunami offshore propagation and inundation based on the example of the 2011 Tōhoku tsunami in Japan. Caused by a megathrust earthquake, this is one of the most severe tsunami events in recent history, resulting in vast inundation and devastation of the Japanese coast. The comparison of the simulated with the measured offshore water levels at four DART buoys located in the north-western Pacific Ocean shows that especially the FM but also the SFINCS model accurately reproduce the observed tsunami propagation. The inundation observed at the Sendai coast is well reproduced by both models. All in all, the model outcomes are consistent with the findings gained in earlier simulation studies. Depending on the specific needs of future tsunami simulations, different possibilities for the application of both models are conceivable: (i) the exclusive use of FM to achieve high accuracy of the tsunami offshore propagation, with the option to use an all-in-one model domain (no nesting required) and to add tsunami sediment dynamics, (ii) the combined use of FM for the accurate simulation of the tsunami propagation and of SFINCS for the accurate and time efficient simulation of the onshore inundation and (iii) the exclusive use of SFINCS to get a reliable picture of the tsunami propagation and accurate results for the onshore inundation within seconds of computational time. This manuscript demonstrates the suitability of FM and SFINCS for the rapid and reliable assessment of tsunami propagation and inundation and discusses use cases of the three model combinations that form an important base for tsunami risk management.
A new set of empirical formulations has been derived to predict wave run-up at naturally sloping sandy beaches. They are obtained by fitting the results of hundreds of XBeach-NH+ model simulations. The simulations are carried out over a wide range of offshore wave conditions (wave heights ranging from 1 to 12 m and periods from 6 to 16 s), and surf zone (Dean parameters aD ranging from 0.05 to 0.30) and beach geometries (slopes ranging from 1:100 to 1:5). The empirical formulations provide estimates of wave set-up, incident and infragravity wave run-up, and total run-up R2%. Reduction coefficients are included to account for the effects of incident wave angle and directional spreading. The formulations have been validated against the Stockdon dataset and show better skill at predicting R2% run-up than the widely used Stockdon relationships. Unlike most existing run-up predictors, the relations presented here include the effect of the surf zone slope, which is shown to be an important parameter for predicting wave run-up. Additionally, this study shows a clear relationship between infragravity run-up and beach slope, unlike most existing predictors.
Rip currents are one of the most dangerous coastal hazards for swimmers. In order to minimize the risk, a coastal operational-process based-model system can be utilized in order to provide forecast of nearshore waves and currents that may endanger beach goers. In this paper, an operational model for rip current prediction by utilizing nearshore bathymetry obtained from video image technique is demonstrated. For the nearshore scale model, XBeach1 is used with which tidal currents, wave induced currents (including the effect of the wave groups) can be simulated simultaneously. Up-to-date bathymetry will be obtained using video images technique, cBathy 2. The system will be tested for the Egmond aan Zee beach, located in the northern part of the Dutch coastline. This paper will test the applicability of bathymetry obtained from video technique to be used as input for the numerical modelling system by comparing simulation results using surveyed bathymetry and model results using video bathymetry. Results show that the video technique is able to produce bathymetry converging towards the ground truth observations. This bathymetry validation will be followed by an example of operational forecasting type of simulation on predicting rip currents. Rip currents flow fields simulated over measured and modeled bathymetries are compared in order to assess the performance of the proposed forecast system.
Wave models are essential for coastal engineering applications, because the (nearshore) wave conditions are required for the design of coastal structures, important drivers of coastal floodings and coastal erosion. Various spectral wave models exist to model the wave propagation, wind growth and energy transfer within a spectrum (Booij, et al. 1996, Günther, et al., 1992). These models have been improved over the last years (e.g. Rogers et al., 2015) and are able to accurately be applied for various applications. As a consequence the wave models became rather slower in terms of computational time than faster. This constricts the use of state-of-the-art wave models in probablistic flooding forecasts or continental scale wave climate downscaling for forcing shoreline modelling. Both these types of applications demand ensemble mode simulations achieved running all simulations in parallel on a super computer. Given that uncertainties in forecasting outcomes are not only a result of model uncertainty but also forcing uncertainty (e.g. hurricane track, storm intensity), this study investigates two alternative approaches to modelling the spectral wave action balance. The first model aims to downscale climate models to the water depths and regions relevant for shoreline modelling. The second alternative model approach aims to provide input to continental scale probabilistic (hurricane-driven) wave forecasts.