A range of microporous, imide-based polymers were newly synthesized using two-step poly-condensation reactions of bis(carboxylic anhydride) and various aromatic diamines for CO₂ gas capture and storage applications. In this report, we attempted to assess the relative significance of molecular structural aspects through the manipulation of the conformational characteristics of the building blocks of the polymeric structures, the spiro-containing acid anhydride and the aromatic amines, to induce greater intrinsic microporosity and higher surface areas for the resulting solids. Results obtained from this study were thus used to outline a working relationship between the structural diversity of the constructed porous solids and their performance as CO₂ sorbents.

The principle of breathable food packaging is to provide the optimal number of pores to transfer a sufficient amount of fresh air into the packaging headspace. In this work, antimicrobial microporous eco-friendly polymeric membranes were developed for food packaging. Polylactic acid (PLA) and polycaprolactone (PCL) were chosen as the main packaging polymers for their biodegradability. To develop the microporous films, sodium chloride (NaCl) and polyethylene oxide (PEO) were used as porogenic agents and the membranes were prepared using solvent-casting techniques. The results showed that films with of 50% NaCl and 10% PEO by mass achieved the highest air permeability and oxygen transmission rate (O₂TR) with PLA. Meanwhile, blends of 20% PLA and 80% PCL by mass showed the highest air permeability and O₂TR at 100% NaCl composition. The microporous membranes were also coated with cinnamaldehyde, a natural antimicrobial ingredient, to avoid the transportation of pathogens through the membranes into the packaged foods. In vitro analysis showed that the biodegradable membranes were not only environmentally friendly but also allowed for maximum food protection through the transportation of sterile fresh air, making them ideal for food packaging applications.

A review on the structure, properties, sustainability, and life cycle analysis of basalt fiber composites, emerging as a major sustainable alternative to traditional synthetic reinforcements such as glass and carbon fibers. Basalt fibers (BFs) are high-performance mineral fibers derived from volcanic rock with a high silica content. These fibers exhibit superior mechanical strength, excellent chemical resistance, and exceptional thermal stability across a broad temperature range. This review explores the multi-sectoral applications of basalt fibers, particularly within the energy and chemical industries. Specific focus is placed on their role as reinforcing agents in concrete and polymer matrix composites, where they provide enhanced durability and corrosion resistance. Central to this discussion is the environmental profile of basalt fibers. We evaluate recent life cycle assessments (LCAs) that compare the environmental gains of BF-reinforced structures. The analysis extends beyond environmental metrics to include the economic and social pillars of sustainability, highlighting basalt’s cost-effectiveness in corrosive environments and its safety as a non-carcinogenic material. This review concludes that basalt fibers offer a significant “green” advantage, encouraging wider industrial adoption.

Novel functionalized and/or grafted crosslinked chitosan adsorbents were synthesized and used to remove several toxic heavy metal ions such as nickel, lead, chromium, and cadmium ions from contaminated water. The chitosan biopolymer was functionalized by maleic anhydride (CS_MA) acting also as a crosslinking agent. Glutaraldehyde-crosslinked chitosan (CS_GA) grafted with poly(methyl methacrylate) (CS_MMA) was also synthesized. The synthesized adsorbents were characterized using a variety of analytical techniques such as SEM, TGA, and FTIR, which confirmed their chemical structures and morphology. The adsorption capacity of the adsorbents was analyzed under various conditions of contact time, adsorbent dose, initial concertation, temperature, and pH and evaluated against those of pure chitosan (CS) and the crosslinked chitosan(CS_GA). The ultimate removal conditions were 0.5 g/100 mL adsorbent dose, an initial metal ion concentration of 50 ppm, a temperature of 45 °C, and pH 9. CS_MMA had the highest removal percentages for all metal ions, ranging from 92% to 94%. The adsorption was demonstrated to fit a pseudo-first-order model that followed a Langmuir adsorption isotherm. The results highlight the capacity of the synthesized polymers to efficiently remove major toxic contaminants at low cost from contaminated water, present especially in low-income areas, without harming the environment.