As the world is going through an existential global health crisis, i.e., the outbreak of novel coronavirus-caused respiratory disease (Covid-19), the healthcare systems of all the countries require readily available, low cost and highly precise equipment for the rapid diagnostics, monitoring, and treatment of the disease. The performance and precision of this equipment are solely dependent on the sensors being used. The advancement in research and development of micro-electro-mechanical systems (MEMS) based sensors during recent years, has resulted in the improvement of the conventional equipment being used in biomedical and health care applications. Microfluidics (Lab-on-a-chip) and MEMS sensors are now being used extensively for quick and accurate detection, progression monitoring, and treatment of various diseases including Covid-19. The ongoing miniaturization and design improvements have resulted in more precise sensors and actuators for healthcare applications, even for micro and nanoscale measurements in drug delivery and other invasive applications. This article aims at reviewing the MEMS sensors being used or which can be used in the important equipment for the detection and treatment of Covid-19 or other pandemics. An insight into various designs and working principles of the research-based and commercially available MEMS sensors is presented. The study highlights the role and importance of MEMS sensors in the improvement of equipment with conventional sensors. MEMS sensors outperform the conventional sensors due to their small size ( $1~\mu \text{m}$ -1mm), negligible weight, prompt response, precise measurements, portability, and ease of integration with electronic circuitry.
The deployment and efficient use of wireless sensor networks (WSNs) in underwater and underground environments persists to be a difficult task. In addition, the localization of a sensor Rx node in WSNs is an important aspect for the successful communication with the aforementioned environments. To overcome the limitations of electromagnetic, acoustic, and optical communication in underwater and underground wireless sensor networks (UWSNs), magneto-inductive (MI) communication technology emerged as a promising alternative for usage in UWSNs with a wide range of applications. To make the magneto-inductive underwater wireless sensor networks (MI-UWSNs) more efficient, recently, various research studies focused on the optimization of the physical layer, MAC layer, and routing layer, but none of them has taken into account the effect of directionality. Despite the directionality issue posed by the physical nature of a magnetic field, the unique qualities of MI communication open up a gateway for several applications. The directionality issue of MI sensors is a critical challenge that must be taken into account while developing any WSN protocol or localization algorithm. This paper highlights and discusses the severity and impact of the directionality issue in designing a localization algorithm for magneto-inductive wireless sensor networks (MI-WSNs). A received signal strength indicator (RSSI)-based multilateration localization algorithm is presented in this paper, where a minimum of 2 and maximum of 10 anchor Tx nodes are used to estimate the position of the sensor Rx nodes, which are deployed randomly in a 15 m × 15 m simulation environment. This RSSI-based multilateration technique is the most suitable option that can be used to quantify the impact of directionality on the localization of a sensor Rx node.
This paper presents an efficient design approach for microelectromechanical systems (MEMS) gyroscope considering the design constraint of MEMSCAP’s Silicon-on-Insulator Multi-User MEMS Processes (SOIMUMPs). A design for a decoupled mass MEMS resonant gyroscope with tuning electrodes is presented to minimize cross-axis coupling and optimize the gyroscope’s performance. The device features a size of . A decoupled mass MEMS gyroscope has been designed using a novel mechanical beam configuration that optimizes the structural design to reduce unwanted interactions between drive and sense axes motions. Mode order has been achieved by obtaining the first two modes as drive and sense modes at 9946.3 Hz and 10 202.7 Hz, respectively. Parallel plate electrostatic tuning electrodes have been added to adjust and match the drive and sense modes at the resonant frequencies of 9946 Hz. This mode matching is crucial for optimizing gyroscope performance, accuracy, and sensitivity. The effects of temperature variation on the performance of the designed decoupled mass MEMS gyroscope have been investigated, particularly in terms of its mode-matched operation achieved using tuning electrodes. Finite element method (FEM) simulations were conducted, demonstrating that thermal stability was achieved, and mode-matched operation was maintained within the temperature range of −40 °C to 80 °C. The gyroscope exhibits enhanced performance compared to existing MEMS gyroscopes under mode-matched conditions, featuring a lower temperature coefficient of frequency (TCF) at 0.0415 Hz °C−1 in the drive mode and 0.0165 Hz °C−1 in the sense mode. FEM analysis for the fabrication process tolerances has been done, where MEMS gyroscope’s resonant frequencies, output capacitance, output displacement, and sense mode quality factor have shown negligible changes to fabrication process tolerances. Transient analysis was conducted using CoventorWare MEMS+ 3D schematic, which was integrated with MATLAB Simulink to measure the MEMS gyroscope’s output response, which corresponded with the varying input angular velocity signal.
The trend towards tunnel farming and hydroponic systems is increasing owing to the climatic changes as well as the need to increase crop yield. Hydroponic is a technique of growing plants without soil. Tunnel farming and hydroponic system requires controlled environmental parameters like temperature, humidity and soil moisture for better production of crops. This paper presents an effective method, named, ACHPA (Automatically Controlled Hydro-Ponic Agriculture) scheme that monitor and controls environmental parameters using sensors and controller. ACHPA provides better environmental control over traditional manual monitoring and controlling, thus yield high-quality crops. Sensor based monitoring and control system regulates the temperature and humidity of the tunnel to yield better. For the sake of saving water, an efficient method of drip irrigation is implemented which delivers water directly to the plants rather than being sprayed on as in conventional farming method. The proposed system here is tested for controlled environment and observations recorded for crop analysis purpose. This makes an effective solution to growing highly efficient, good quality and disease free crop production.
The global demand for drinking water is increasing day by day. Different methods are used for desalination of water, which can help in the conservation of resources, such as seawater, highly saline, or treated water underground reservoirs. Polluted water can be treated by the utilization of different advanced techniques. In this study, wastewater mixed canal water has been taken into consideration for the utilization of humans and agriculture use as well. A two-stage conceptual methodology has been proposed to deal with the water conservation and utilization process. In the first phase, power has been produced using a Belgian vortex turbine, which is a safe, efficient, and eco-friendly technology working without disturbing waterways. The power produced by the vortex machine will be utilized to operate the water treatment plant to obtain clean water for utilization in the second phase. Since enough energy is produced, and its availability to the water head level base is a natural resource, this energy can be used to fulfill daily water requirements by maximizing the energy-driven treatment process as per WHO Guidelines. Water quality can be monitored at regular intervals, depending upon the selection and installation of a treatment plant. An increase in efficiency comes from nearly exponential patterns depending on water velocity and availability. This technique will not only help in the production of clean water but will also help in the conservation of groundwater resources and the efficient utilization of wastewater.
15 August 2024 in Journal of Vibration Engineering & Technologies