A centrifugal compressor of a micro turbine generator system is investigated by the theoretical model and numerical analysis to explore the characteristics of the tip leakage vortex as the centrifugal compressor approaches stall. The numerical simulation results show the cross-sectional shape of the tip leakage vortex is elliptical, and its long and short axes are gradually stretched as the compressor approaches stall. Moreover, the vortex trajectory is inclined to the pressure side of the adjacent blade. In addition, the Kirchhoff elliptical vortex model is introduced to analyze the flow passage constriction effect, the passage vortex squeezing effect, and the leakage flow translation effect. Results show that there is no upper limit for the flow passage constriction effect on the tip leakage vortex. Furthermore, relative to the original vortex, the minimum constriction effect depends on the axis ratio of the elliptical tip leakage vortex. The passage vortex has an expansion effect on the tip leakage vortex rather than a squeezing effect, which is limited and also depends on the axis ratio of the ellipse. However, the effect magnitude of the leakage flow depends on the scales both of the long and short axes, which also have no upper limit.
9 October 2023 in International Journal of Aerospace Engineering
The tip leakage vortex (TLV) induced by the tip clearance flow has a significant impact on the performance of centrifugal compressors, causing impeller flow losses and reducing the stall margin. To solve this problem, an unsteady flow control technology called the NCFC method is proposed based on the concept of negative circulation control, realized by a vortex generator placed in a tube connected with the shroud through a hole. The approach is derived from a theoretical study of the compressor TLV by introducing a two-dimensional vortex model. A numerical simulation is then performed to verify the effectiveness of the NCFC method. The result shows that the NCFC method can greatly stabilize the flow field at the blade tip and improve the stall margin and efficiency of the compressor without reducing the total pressure ratio of the compressor, which has the characteristics of both unsteadiness and negative circulation effect. In addition, a HC method with only unsteady excitation effect is also studied for comparison, which only slightly stabilizes the blade tip flow and increases the stall margin of the compressor, suggesting that the NCFC is more effective than the HC. Finally, it is highly recommended to improve the efficiency of any unsteady jet/suction and separation flow interaction.