In the analysis of the interaction between external periodic excitation and unsteady separated flow in controlling the flow separation, a new nonlinear approximate model has been established. This model is used to describe the typical chaotic and coherent characteristics of a separated flow such as small- or large-scale vortices, the injection, and the dissipation of the kinetic energy based on a simulation of a simplified cross-direction motion of free shear flows. This study presents an appropriate treatment to simulate the external periodic excitation and uses the maximum Lyapunov exponent to evaluate the degree of flow ordering in the different control states. The results of the nonlinear model are compared with experimental and numerical results, showing that the nonlinear model could be used to effectively explain the behaviours of chaotic flows and investigate the rules for controlling separated flows. In addition, as shown in the nonlinear approximate model, the self-synchronization of unsteady flow separation and periodic excitation has been analysed. Initially, the research provided an explanation of the self-synchronization mechanism, which cites that the effects of the separated flow control are independent of the phase difference between the periodic excitation and the unsteady flow. The characteristics of unsteady separated flow control have also been presented in this model, where the corresponding large eddy simulation (LES) was used for separated flows in a curved diffuser. The proper orthogonal decomposition (POD) method was used to analyse the difference between separated vortical structures with or without periodic excitation. The results showed that the model and the simulation had the same mechanism of flow control as for the separated flows. The periodic excitation transforms the original chaotic flow into a relatively ordered flow and decreases the magnitude of the chaotic unstable vortices, rather than completely eliminating the vortices, while flow mixing is reduced, inducing less energy loss.
A centrifugal compressor of a micro turbine generator system is investigated by the theoretical model and numerical analysis to explore the characteristics of the tip leakage vortex as the centrifugal compressor approaches stall. The numerical simulation results show the cross-sectional shape of the tip leakage vortex is elliptical, and its long and short axes are gradually stretched as the compressor approaches stall. Moreover, the vortex trajectory is inclined to the pressure side of the adjacent blade. In addition, the Kirchhoff elliptical vortex model is introduced to analyze the flow passage constriction effect, the passage vortex squeezing effect, and the leakage flow translation effect. Results show that there is no upper limit for the flow passage constriction effect on the tip leakage vortex. Furthermore, relative to the original vortex, the minimum constriction effect depends on the axis ratio of the elliptical tip leakage vortex. The passage vortex has an expansion effect on the tip leakage vortex rather than a squeezing effect, which is limited and also depends on the axis ratio of the ellipse. However, the effect magnitude of the leakage flow depends on the scales both of the long and short axes, which also have no upper limit.
In this study, a novel fluidic oscillator suitable for use as a key component of a flow control device is proposed and investigated through numerical simulations. The new layout adds resonators to a typical fluidic oscillator with dual feedback channels, and the length of the feedback loop is designed to be adjustable. This fluidic oscillator with movable feedback channels and resonators can generate a jet with an adjustable frequency, and it has smaller total pressure loss than the baseline model. Numerical results show that the movement of the feedback channels regulates the degree of coupling between the feedback channels and resonators to generate different orders of jet frequencies. This self-excited fluidic oscillator with adjustable jet frequency is more adaptive than typical designs when dealing with complex flow separation conditions, and it will be more stable because the frequency adjustment requires neither high-frequency movable mechanisms nor external energy input. Moreover, the frequency switching phenomenon is observed in special cases, which may help improve the efficiency of the compressor blades with a drastically changed dominant frequency under off-design conditions or with multiple dominant frequencies, such as tip leakage flow and shock–boundary layer interaction.
To control the flow separation in the compressors, a novel pulsed jet concept without external energy injection is proposed. The new concept designs a slot in the middle of the blade and sets a micro device to switch the slot periodically. Such a structure is expected to generate a pulsed jet by the pressure difference between the pressure side and the suction side of the blade. In order to analyze the interaction between the pulsed jet and unsteady separated flow, our numerical and experimental study is based on a specific cascade (with a flow separation inside) and a pulsed jet (one of the unsteady flow control method). The experimental and numerical results both show that when the frequency of pulsed jet is approximate to that of the separation vortex, then the control tends to be more effective. Based on the numerical simulations, the proper orthogonal decomposition (POD) is then used to reveal the control mechanism, extracting the different time-space structures from the original field. The results with the aid of POD show that the pulsed jet can redistribute the kinetic energy of each mode, and strengthen or weaken certain modes, particularly, while the steady jet reduces the kinetic energy of high-order modes in whole. Also, pulsed jet with proper parameters can transfer the energy from higher modes to the first flow mode (averaged flow), which is due to the conversion of the spatial vortical structures and the time evolution of the modes.
1 October 2021 in Aerospace Science and Technology