This chapter aims to collect and summarize the chemical properties of cobalt and some new cobalt compounds. It deals with the progress of cobalt chemistry. Cobalt has been substantial in both chemical reactions and within many compounds. Some of them are heterocyclic reactions, cobalt-based catalyst and cobalamin. Also, it discusses variety of applications of cobalt in a wide range of areas and toxicity of cobalt. The studies carried out in this area so far have enabled and will be continued to be responsible for producing unknown and difficult reactions. This survey of the recent literature illustrates the fact that many different approaches on cobalt and new cobalt compounds are being used in many different areas.
Polyethylene glycol (PEG) is a preferred hydrophilic polymer as an additive for casting solutions. In this study, polymeric membranes containing 1,10-phenanthroline and different molecular weights of polyethylene glycol (PEG) are tested for the morphological change and metal retention on the membrane surface. Additives in the form of PEGs with molecular weights of 400 Da, 600 Da, and 6000 Da were used. The morphology of each membrane was examined using scanning electron microscopy (SEM). It appears that copper has more retention than cadmium in all membrane components in SEM–EDS analysis. FTIR spectra findings provided evidence that PEG binds to the PVC backbone through hydrogen bonds involving chlorine atoms in the PVC and hydrogen atoms in the hydroxyl groups of PEG. The porosity of the membrane was determined by gravimetric method. The molecular weight of PEG in the membrane seems to be increasing, the porosity of the membrane improved. The porosity of the membrane obtained with PVC/ PEG/ 1,10-phenanthroline is 62.85 for PEG 400, 80.00 for PEG 600 and 83.50 for PEG 6000. The order of metal retention on the surface of the membranes consisting of PVC-1,10 phenanthroline and PEGs are Cu > Cd, indicating that with its large diameter (140 pm), cadmium cannot settle into the pores as much as copper. Except for PEG 600, the retention of both metals decreased with the addition of phenanthroline to the membrane containing PEG. The amorphous structure was detected from the XRD of the membranes. Thermal analysis of the membrane was determined by TG-DSC. Graphical Abstract
1 January 2022 in Journal of the chemical society of pakistan
Journal of the Chemical Society of Pakistan (JCSP) is a bimonthly Journal which publishes results of original, unpublished research work and review articles in all fields of Chemistry.
Colour is typically the initial pollutant identified in wastewater. Membrane separation represents a novel approach to separation processes, with expectations of supplanting many traditional separation systems. The aim of this study is to investigate polymer inclusion membranes (PIMs) consisting of tri octyl methyl ammonium chloride as the carrier, tributylphosphate as the modifier, poly-vinyl chloride as the base polymer and 2-Nitro phenyl pentyl ether as the plasticizer for removing an acid dye (Red Erionyl A-3G) from aqueous solution. The dye adsorption on the membrane surface and its transition to the stripping phase was achieved by placing the membrane between two glass cells. Changing the stripping solution ensured both adsorption on the membrane surface and the transfer of all the dye to the stripping stage. Using a mixture of 0.8 M salicylic acid and 0.8 M NaOH, along with stirring at 1000 rpm during the stripping phase, extraction efficiency reached 98% in the feed phase and 53% in the stripping phase. When 1 M NaOH solution was employed as the stripping solution, the membrane absorbed all the dye within 10 minutes, but there was no transition to the stripping phase. The membrane has a durability of 2 days. Graphical abstract
21 June 2022 in Latin American Applied Research - An international journal
Hydrogen sulfide is a highly toxic gas and must be removed from where it is found or formed. Which of these techniques to choose is decided based on the nature of the gas. This study, it is aimed to develop a membrane that holds the gas in processes and places where gas can occur and wishes to prevent possible threats. The membrane was prepared by loading copper sulfate into the polymeric resin with mechanical mixing. The copper retained hydrogen sulfide gas in the membrane. Results show that the membrane captures 97 percent of H2S in the feed. It was observed in this study that a membrane with copper sulfate successfully carried out the removal of the hydrogen sulfide. The success of the membrane that we have obtained in capturing hydrogen sulfide encourages the membrane to be recommended to local governments