MURAT TEKER

Dr. MURAT TEKER

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2024 in Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Verified
Journal Article
Closed access
AUAYŞE USLUOĞLU
AYŞE USLUOĞLU
MTMURAT TEKER
MURAT TEKER
HAHilal Gülnur Alşan
Hilal Gülnur Alşan
Mikrodalga ortamında C.I. Reactive Yellow 138:1 boyarmaddesinin pamuk elyafı üzerine boyama proses çalışmaları yapıldı. Boya prosesleri, L, ML, M mikrodalga seviyelerinde, pamuklu kumaşın seçilen reaktif boyarmadde ile zamana bağlı olarak boyama işlemleri yapıldı. Tüm boyanan kumaşların K/S değerleri ölçüldü. Tüm veriler kullanılarak 0., I., II. Derece hız denklemleri oluşturuldu ve II. Derece hız denklemine uygun olduğu belirlenerek hız sabitleri hesaplandı. Mikrodalga ortamda boyama renk derinliğinin zamana bağlı olarak arttığı görülmüştür. Konvansiyonel reaktif boyama proses süresi 90 dakikadır, boyalı kumaşın K/S değeri 6.35’tir. Mikrodalga ortamda L seviyesinde boyama süresi 10 dakikada tamamlanmıştır, boyalı kumaşın K/S değeri 6.72 olup, daha derin renk elde edilmiştir. Mikrodalga ortamda boyama işlem süresinin geleneksel yöntemlere göre oldukça azaldığı gözlemlenmiştir.

8 July 2024 in Water, Air, & Soil Pollution
Verified
Journal Article
Open access
PDF file
AMAynur Manzak
Aynur Manzak
ÖDÖzlem Demirbaş
Özlem Demirbaş
YYYasemin Yildiz
Yasemin Yildiz
MTMURAT TEKER
MURAT TEKER
Colour is typically the initial pollutant identified in wastewater. Membrane separation represents a novel approach to separation processes, with expectations of supplanting many traditional separation systems. The aim of this study is to investigate polymer inclusion membranes (PIMs) consisting of tri octyl methyl ammonium chloride as the carrier, tributylphosphate as the modifier, poly-vinyl chloride as the base polymer and 2-Nitro phenyl pentyl ether as the plasticizer for removing an acid dye (Red Erionyl A-3G) from aqueous solution. The dye adsorption on the membrane surface and its transition to the stripping phase was achieved by placing the membrane between two glass cells. Changing the stripping solution ensured both adsorption on the membrane surface and the transfer of all the dye to the stripping stage. Using a mixture of 0.8 M salicylic acid and 0.8 M NaOH, along with stirring at 1000 rpm during the stripping phase, extraction efficiency reached 98% in the feed phase and 53% in the stripping phase. When 1 M NaOH solution was employed as the stripping solution, the membrane absorbed all the dye within 10 minutes, but there was no transition to the stripping phase. The membrane has a durability of 2 days. Graphical abstract

1 April 2024 in Journal of the Turkish Chemical Society Section B: Chemical Engineering
Verified
Journal Article
Closed access
MTMURAT TEKER
MURAT TEKER
AUAYŞE USLUOĞLU
AYŞE USLUOĞLU
EÖEsra Öztürk
Esra Öztürk
The effect of accelerator type on vulcanization characteristics and mechanical properties of natural rubber was investigated. Also, the effect of growing quantity of MBTS on vulcanization characteristics and mechanical properties of natural rubber was investigated. The results show that the fastest cure time is obtained with thiurams and dithiocarbamates for natural rubber. Sulphenamides, especially TBBS gives the best tensile strength. Elongation at break first increases by increasing dose of MBTS and then decreases. The higher elongation at break is obtained with DPG.

20 March 2026 in Processes
Verified
Journal Article
Open access
PDF file
RDRASIT DAGLI
RASIT DAGLI
MTMURAT TEKER
MURAT TEKER
AUAYŞE USLUOĞLU
AYŞE USLUOĞLU
In this study, the dyeing kinetics of polyamide fabrics with acid dyes, such as Telon Blue M2R, under both conventional and microwave-assisted heating conditions were comprehensively investigated. While the conventional dyeing reaction was completed in 30 min, microwave-assisted dyeing was performed in the microwave device for 10 min. Dyeing kinetics were investigated as a function of reaction time, reaction concentration and dyeing temperatures. The K/S values (color depth) of the dyed fabrics were correlated with the concentration. A significant reduction in the dyeing process time for polyamide fabric was observed with microwave heating compared to the conventional method. Kinetic analysis revealed that the Pseudo-Second-Order (PSO) kinetic model provides a better fit to the experimental data on the diffusion process of acid dye in polyamide fabrics, as evidenced by higher correlation coefficients (R2) compared to the Pseudo-First-Order (PFO) model. The activation energy of the reaction in dyeing was found to be 63.27 kJ/mol, and the Arrhenius constant was determined as 7.20 × 1010 L/g·min in conventional media and 18.70 × 1010 L/g·min in microwave media. The Arrhenius factor in the microwave medium was more than two times higher than in the conventional media.

30 January 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
RDRaşit Dağlı
Raşit Dağlı
MTMURAT TEKER
MURAT TEKER
AUAYŞE USLUOĞLU
AYŞE USLUOĞLU
This study compares the acid dyeing of Polyamide 6 (PA6) fabric using conventional heating and microwave-assisted techniques and examines reaction parameters (temperature, time, pH, dye concentration) on conventional and microwave system. C.I. Acid Blue 324 was used to explore the effects of critical process parameters, including pH, temperature, dyeing time, and dye concentration, on color strength (K/S). Conventional and Microwave Dyeing showed an inverse correlation between pH and K/S, with optimal color yield achieved at pH 3.0. Dye uptake was enhanced by increasing temperature, with maximum K/S obtained at 95°C for 30 minutes and the highest dye concentration (1.50 %). In contrast, the microwave-assisted dyeing methodology (160 W) drastically accelerated the process. Optimal conditions for microwave dyeing also favored an acidic media (pH 3.0) and showed a strong positive correlation between microwave exposure time and K/S. The microwave-assisted technique is confirmed as a rapid, energy-efficient, green process and effective alternative for dyeing PA6, offering significant potential for reduced processing time.

30 August 2024 in Journal of the Turkish Chemical Society Section A: Chemistry
Verified
Journal Article
Open access
PDF file
MTMURAT TEKER
MURAT TEKER
AUAYŞE USLUOĞLU
AYŞE USLUOĞLU
EÖEsra Öztürk
Esra Öztürk
: EPDM (ethylene propylene diene monomer) is a type of synthetic rubber. The products of rubber have great importance in every part of life. EPDM rubber has high tensile strength, high tension, toughness, and is weather resistant. Therefore, EPDM (ethylene-propylene-diene rubber) is widely used in many fields. The aim of this study is to examine the effect of accelerator type on mechanical properties and vulcanization characteristics of EPDM rubber. We used the accelerators; thiazole, sulfonamides, dithiocarbamate, thiuram, and guanidine groups. The results show that the fastest cure time and the best tensile strength are achieved with dithiocarbamates for EPDM rubber.