Hybrid subdomain analysis is utilized to optimize the design of a high speed compressor motor. Permanent magnets (PMs) are arranged in Halbach array, and bounded by a carbon fiber sleeve. The stator core does not have a slot structure, so that it is advantageous in reducing the iron loss. Since the core saturation takes place, magnetic equivalent circuit (MEC) is used to find the permeability depending on flux density of stator yoke. Furthermore, since the core is not infinitely permeable in subdomain analysis, the solution is obtained in the whole subdomain regions: shaft, PM, air-gap, coil, and stator yoke. The results of hybrid analysis are compared with those of finite-element analysis (FEA). Very close matching results are obtained in flux density and torque even under yoke saturation. The stator yoke height is optimized against the rotor outer radius so that torque, power density and efficiency are maximized, while stator outer radius, stack length and coil area are fixed.
Since the slot opening is large in the uniform slot machine, the torque ripple generated by overlapping or misaligning with the rotor cavity is remarkably large in the case of interior permanent magnet (IPM) machine. In this work, it is observed that the magnitude of torque ripple depends strongly on the phase difference between air-gap field harmonics: The ripple is minimized when the two dominant harmonic components cancel each other. Based on this fact, a condition is developed to minimize torque ripple by adjusting the q-flux channel width and d-flux barrier width. The torque ripple minimizing solution is found from a level chart made by subdomain time-stepping analysis. Finite element analysis (FEA) also gives a very similar minimizing solution. A prototype machine is manufactured, and its performances are validated through experiments.