Abdirizak Ali Omar

Mr. Abdirizak Ali Omar

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 March 2026 in Nature
Verified
Journal Article
Open access
PDF file
EOEric Oelkers
Eric Oelkers
SASerguey Arkadakskiy
Serguey Arkadakskiy
ZAZeyad Ahmed
Zeyad Ahmed
NKNoushad Kunnummal
Noushad Kunnummal
JFJakub Fedorik
Jakub Fedorik
HHHussein Hoteit
Hussein Hoteit
Carbon capture and storage (CCS) has the potential to help nations meet their Paris Agreement CO 2 reduction commitments 1,2 . The ability to capture CO 2 within mafic and ultramafic rocks through mineralization of carbon is an example of such a CCS technology 3,4 , but large-scale deployment has yet to be achieved 5,6 . Each geologic environment in the Earth’s crust requires a distinct carbon storage solution. Whereas some regions of the subsurface contain saline aquifers and sedimentary traps suitable for traditional carbon storage through the injection of high-pressure, dense CO 2 below impermeable caprocks, other regions may lack caprocks 5–9 . In these regions, carbon storage is possible through the mineralization of injected water-dissolved CO 2 forming stable carbonate minerals through its reactions with reactive silicate rocks and minerals 6,10,11 . A notable challenge to applying this process at scale is that it can require 20–50 times or more water than the mass of CO 2 stored 12 . Here we report on an industrial-scale pilot project designed to find a carbon disposal solution for western Saudi Arabia. This arid region has large point-source CO 2 emitters, including petroleum refining and desalination facilities, but lacks saline aquifers and sedimentary traps 13–17 . We find that a CO 2 injection approach based on the recirculation of subsurface fluids can eliminate the need for external water. Our results demonstrate the feasibility of carbon mineral storage in regions in which access to water resources may be limited.

10 November 2021 in Energies
Verified
Journal Article
Open access
PDF file
AOAbdirizak Ali Omar
Abdirizak Ali Omar
MAMouadh Addassi
Mouadh Addassi
VVVolker Vahrenkamp
Volker Vahrenkamp
Hussein HoteitHussein Hoteit
Hussein Hoteit
CO2-based enhanced gas recovery (EGR) is an appealing method with the dual benefit of improving recovery from mature gas reservoirs and storing CO2 in the subsurface, thereby reducing net emissions. However, CO2 injection for EGR has the drawback of excessive mixing with the methane gas, therefore, reducing the quality of gas produced and leading to an early breakthrough of CO2. Although this issue has been identified as a major obstacle in CO2-based EGR, few strategies have been suggested to mitigate this problem. We propose a novel hybrid EGR method that involves the injection of a slug of carbonated water before beginning CO2 injection. While still ensuring CO2 storage, carbonated water hinders CO2-methane mixing and reduces CO2 mobility, therefore delaying breakthrough. We use reservoir simulation to assess the feasibility and benefit of the proposed method. Through a structured design of experiments (DoE) framework, we perform sensitivity analysis, uncertainty assessment, and optimization to identify the ideal operation and transition conditions. Results show that the proposed method only requires a small amount of carbonated water injected up to 3% pore volumes. This EGR scheme is mainly influenced by the heterogeneity of the reservoir, slug volume injected, and production rates. Through Monte Carlo simulations, we demonstrate that high recovery factors and storage ratios can be achieved while keeping recycled CO2 ratios low.

1 September 2021 in International Journal of Greenhouse Gas Control
Verified
Journal Article
Closed access
MAMouadh Addassi
Mouadh Addassi
AOAbdirizak Ali Omar
Abdirizak Ali Omar
KGKassem Ghorayeb
Kassem Ghorayeb
Hussein HoteitHussein Hoteit
Hussein Hoteit

21 January 2025 in International Journal of Greenhouse Gas Control
Verified
Journal Article
Open access
AOAbdirizak Ali Omar
Abdirizak Ali Omar
MAMouadh Addassi
Mouadh Addassi
DBDavide Berno
Davide Berno
AAAbdulwahab Alqahtani
Abdulwahab Alqahtani
NMNiccolò Menegoni
Niccolò Menegoni
EOEric H. Oelkers
Eric H. Oelkers

5 February 2025 in Geoenergy
Verified
Journal Article
Open access
NMNiccolò Menegoni
Niccolò Menegoni
JFJ. Fedorik
J. Fedorik
YPYuri Panara
Yuri Panara
DBD. Berno
D. Berno
MAMouadh Addassi
Mouadh Addassi
Thomas FinkbeinerThomas Finkbeiner
Thomas Finkbeiner
Permanent CO 2 storage in altered basalts, which may have lost most of their primary porosity and permeability, is facilitated by subsurface fractures, governing the fluid flow inside the storage reservoir. A successful pilot test demonstrated the in situ CO 2 mineralization potential of the highly fractured basaltic rocks of the Jizan Group in SW Saudi Arabia. We characterize the subsurface fracture networks utilizing image logs acquired from the wells drilled at the pilot site. The hydraulic connectivity and circulation pathways between the injector and producer wells are inferred by combining the fracture distribution, mechanical aperture at the wellbore walls, fracture persistence between the two wells and data acquired from flowmeter logs. Five fracture sets were identified with the most abundant one striking NW–SE and dipping 50–60° towards the SW and NE. Furthermore, an abundance of stress-induced wellbore breakouts reveals a NW–SE direction of the present-day maximum horizontal stress axis. This orientation is consistent with the regional tectonics and it is sub-parallel to the mechanically open fractures, a favourable orientation for fluid flow. Outcrop studies and subsurface data reveal primary rock layers tilting towards the SW and an extensive presence of NE-dipping faults and NW–SE-striking fractures. These observations are consistent with the Jizan Group fracture network characteristics in outcrops. Although, on the surface, the fracture sets that strike in different directions suggest and/or display high interconnectivity, flowmeter logs reveal that despite the basalts being pervasively fractured, fluid flow in the subsurface seems to be controlled predominantly by three fracture zones with wide mechanical apertures. Despite that, our findings align with the positive results from the pilot test, confirming that the subsurface at the site possesses sufficient permeability to transmit injected H 2 O–CO 2 fluid along preferential flow paths, primarily through fractures with wide mechanical apertures. This suggests that the Jizan Group is a good target for in situ CO 2 mineralization in basalt, owing to its extensive fracture network and the presence of highly permeable fluid flow zones, which enable carbonated waters to flow and react with a significant volume of rock.

8 February 2021 in SSRN Electronic Journal
Verified
Preprint
Open access
PDF file
AOAbdirizak Ali Omar
Abdirizak Ali Omar
MAMouadh Addassi
Mouadh Addassi
Hussein HoteitHussein Hoteit
Hussein Hoteit
VVVolker Vahrenkamp
Volker Vahrenkamp
The transition for clean, efficient, reliable, and affordable sources of energy is one of the top challenges of this century. Despite significant advances in renewable energies such as solar and wind, fossil fuels will remain a primary source of energy for years to come. Natural gas, fueling power generation and other vital industrial sectors such as desalination, is expected to play a more prominent role in the energy mix for many countries around the world. The demand for natural gas, especially in the Middle East, is on the rise. With the shortfall in recurrent discoveries of conventional gas resources, improving the recovery factors from legacy gas reservoirs is crucial. On the other hand, burning gas, like other fossil fuels, is associated with significant greenhouse gas emissions that should be mitigated, which is critical to comply with the pressing call for low-emission economies. CO2 injection in gas reservoirs is appealing as it may provide a dual benefit, including enhanced gas recovery (EGR), and partial entrapment of CO2 in the subsurface reservoir. Different CO2-EGR recovery schemes have been studied in the literature and showed that key thermodynamic properties of CO2, such as its high viscosity and density at reservoir conditions, make CO2 an efficient displacing fluid for the hydrocarbon gas. On the one hand, injecting CO2 can maintain the reservoir pressure by providing voidage replacement amid gas production. On the other hand, it can displace and mobilize the gas in place towards the production wells; nonetheless, CO2-EGR may not be economically viable. The main drawback of CO2 injection is the relatively rapid breakthrough at the production wells leading to gas recovery inefficiency due to CO2 separation and recycling. This pre-mature breakthrough of CO2 is driven by CO2/gas dilution from mechanical mixing, dispersion, and molecular diffusion. Producing gas with high impurity because of CO2 mixing adds significant CAPEX and OPEX related to the surface facilities and gas treatment, especially for fields whose initial content of CO2 within the gas composition is negligible. In this work, we propose a CO2-based EGR scheme that involves two stages. The first stage corresponds to the situation when the reservoir pressure is below that CO2 bubble point pressure. At this condition, CO2 will be in the gas state, and therefore, its sweep and displacement efficiency will be poor owing to its low viscosity and density. At this stage, CO2/gas mixing will be pronounced, and CO2 mobility will be high, leading to an early breakthrough. To avoid this unfavorable situation, we propose to co-inject brine and CO2 (carbonated water) in which CO2 will be in the aqueous solution and non-buoyant. As the carbonated water is heavier than the in-situ brine, CO2 remains trapped in the aqueous phase and flows down-dip towards the bottom of the reservoir. In stage 2, CO2 is injected in its dense supercritical phase, where the presence of water reduces its mobility and delays its breakthrough time. This two-stage injection process is more efficient than the traditional continuous CO2 injection. We demonstrate the effectiveness of this recovery scheme for a synthetic model mimicking an actual gas field. We analyze the optimum transition conditions from stage 1 to stage 2 and show a significant incremental recovery and CO2 entrapment compared to the traditional CO2-EGR that relies on continuous CO2 injection. This proposed scheme serves both objectives, which are an efficient EGR and optimum CO2 sequestration resulting from delayed CO2 breakthrough. We believe that this scheme provides significant improvements to the traditional CO2-EGR and has the features to be deployed at the field scale.