Thomas Finkbeiner

Prof. Thomas Finkbeiner

King Abdullah University of Science and Technology
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 August 2021 in Rock Mechanics and Rock Engineering
Verified
Journal Article
Open access
PDF file
ACAlejandro Cardona
Alejandro Cardona
Thomas FinkbeinerThomas Finkbeiner
Thomas Finkbeiner
JSJ.Carlos Santamarina
J.Carlos Santamarina
Fractures provide preferential flow paths and establish the internal “plumbing” of the rock mass. Fracture surface roughness and the matedness between surfaces combine to delineate the fracture geometric aperture. New and published measurements show the inherent relation between roughness wavelength and amplitude. In fact, data cluster along a power trend consistent with fractal topography. Synthetic fractal surfaces created using this power law, kinematic constraints and contact mechanics are used to explore the evolution of aperture size distribution during normal loading and shear displacement. Results show that increments in normal stress shift the Gaussian aperture size distribution toward smaller apertures. On the other hand, shear displacements do not affect the aperture size distribution of unmated fractures; however, the aperture mean and standard deviation increase with shear displacement in initially mated fractures. We demonstrate that the cubic law is locally valid when fracture roughness follows the observed power law and allows for efficient numerical analyses of transmissivity. Simulations show that flow trajectories redistribute and flow channeling becomes more pronounced with increasing normal stress. Shear displacement induces early aperture anisotropy in initially mated fractures as contact points detach transversely to the shear direction; however, anisotropy decreases as fractures become unmated after large shear displacements. Radial transmissivity measurements obtained using a torsional ring shear device and data gathered from the literature support the development of robust phenomenological models that satisfy asymptotic trends. A power function accurately captures the evolution of transmissivity with normal stress, while a logistic function represents changes with shear displacement. A complementary hydro-chemo-mechanical study shows that positive feedback during reactive fluid flow heightens channeling.

17 September 2022 in Energy
Verified
Journal Article
Closed access
MAMusa D. Aliyu
Musa D. Aliyu
Thomas FinkbeinerThomas Finkbeiner
Thomas Finkbeiner
HCHua-Peng Chen
Hua-Peng Chen
RARosalind A. Archer
Rosalind A. Archer

13 January 2024 in Geoenergy Science and Engineering
Verified
Journal Article
Closed access
BYBicheng Yan
Bicheng Yan
ZXZhen Xu
Zhen Xu
MGManojkumar Gudala
Manojkumar Gudala
ZTZeeshan Tariq
Zeeshan Tariq
SSShuyu Sun
Shuyu Sun
Thomas FinkbeinerThomas Finkbeiner
Thomas Finkbeiner

5 April 2021 in Rock Mechanics and Rock Engineering
Verified
Journal Article
Open access
PDF file
APA. Perbawa
A. Perbawa
EGE. Gramajo
E. Gramajo
Thomas FinkbeinerThomas Finkbeiner
Thomas Finkbeiner
JSJ.Carlos Santamarina
J.Carlos Santamarina
Accurate stress–strain measurements in triaxial tests are critical to compute reliable mechanical parameters. We focus on compliance at the interfaces between the specimen and endcaps, and test specimens under various triaxial conditions using different instrumentation protocols. The tested materials include aluminum, Eagle Ford shale, Berea sandstone, and Jubaila carbonate. Results obtained following common practice reveal that surface roughness at the specimen-endcap interfaces leads to marked seating effects, affects all cap-to-cap based measurements and hinders ultrasonic energy transmission. In particular, cap-to-cap deformation measurements accentuate hysteretic behavior, magnify biases caused by bending and tilting (triggered by uneven surfaces and misalignment), and affect the estimation of all rock parameters, from stiffness to Biot’s α-parameter. Higher confining pressure diminishes seating effects. Local measurements using specimen-bonded strain gauges are preferred (Note: mounting strain gauges on sleeves is ill-advised). We confirm that elastic moduli derived from wave propagation measurements are higher than quasi-static moduli determined from local strain measurements using specimen-bonded strain gauges, probably due to the lower strain level in wave propagation and preferential high-velocity travel path for first arrivals.

18 November 2021 in Energies
Verified
Journal Article
Open access
PDF file
DODaniela Andrea Arias Ortiz
Daniela Andrea Arias Ortiz
LKLukasz Klimkowski
Lukasz Klimkowski
Thomas FinkbeinerThomas Finkbeiner
Thomas Finkbeiner
TPTadeusz Patzek
Tadeusz Patzek
We propose three idealized hydraulic fracture geometries (“fracture scenarios”) likely to occur in shale oil reservoirs characterized by high pore pressure and low differential in situ stresses. We integrate these geometries into a commercial reservoir simulator (CMG-IMEX) and examine their effect on reservoir fluids production. Our first, reference fracture scenario includes only vertical, planar hydraulic fractures. The second scenario has stimulated vertical natural fractures oriented perpendicularly to the vertical hydraulic fractures. The third fracture scenario has stimulated horizontal bedding planes intersecting the vertical hydraulic fractures. This last scenario may occur in mudrock plays characterized by high pore pressure and transitional strike-slip to reverse faulting stress regimes. We demonstrate that the vertical and planar fractures are an oversimplification of the hydraulic fracture geometry in anisotropic shale plays. They fail to represent the stimulated volume geometric complexity in the reservoir simulations and may confuse hydrocarbon production forecast. We also show that stimulating mechanically weak bedding planes harms hydrocarbon production, while stimulated natural fractures may enhance initial production. Our findings reveal that stimulated horizontal bedding planes might decrease the cumulative hydrocarbon production by as much as 20%, and the initial hydrocarbon production by about 50% compared with the reference scenario. We present unique reservoir simulations that enable practical assessment of the impact of varied hydraulic fracture configurations on hydrocarbon production and highlight the importance of constraining present-day in situ stress state and pore pressure conditions to obtain a realistic hydrocarbon production forecast.

21 January 2025 in International Journal of Greenhouse Gas Control
Verified
Journal Article
Open access
AOAbdirizak Ali Omar
Abdirizak Ali Omar
MAMouadh Addassi
Mouadh Addassi
DBDavide Berno
Davide Berno
AAAbdulwahab Alqahtani
Abdulwahab Alqahtani
NMNiccolò Menegoni
Niccolò Menegoni
EOEric H. Oelkers
Eric H. Oelkers