This paper investigates the effect of oscillator phase noise on a multiuser millimeter wave (mmWave) massive MIMO uplink as we scale up the number of base station antennas, fixing the load factor, defined as the ratio of the number of simultaneous users to the number of base station antennas. We consider a modular approach in which the base station employs an array of subarrays, or “tiles.” Each tile supports a fixed number of antennas, and can therefore be implemented using a separate radio frequency integrated circuit (RFIC), with synchronization across tiles accomplished by employing a phased locked loop in each tile to synthesize an on-chip oscillator at the carrier frequency by locking on to a common lower frequency reference clock. Assuming linear minimum mean squared error (LMMSE) multiuser detection, we provide an analytical framework that can be used to specify the required power spectral density (PSD) mask for phase noise for a target system performance. Our analysis for the phase noise at the output of the LMMSE receiver indicates two distinct effects: self-noise for each user which is inversely proportional to the number of tiles, and cross-talk between users which is insensitive to the number of tiles, and is proportional to the load factor. These analytical predictions, verified by simulations for a 140 GHz system targeting a per-user data rate of 10 Gbps, show that tiling is a robust approach for scaling. Numerical results for our proposed design approach yield relatively relaxed specifications for phase noise PSD masks.
29 October 2019 in IEEE Transactions on Wireless Communications
Picocellular architectures are essential for providing the spatial reuse required to satisfy the everincreasing demand for mobile data. A key deployment challenge is to provide backhaul connections with sufficiently high data rate. Providing wired support (e.g., using optical fiber) to pico base stations deployed opportunistically on lampposts and rooftops is impractical, hence wireless backhaul becomes an attractive approach. A multihop mesh network comprised of directional millimeter (mm) wave links is considered here for this purpose. Such networks are well suited for scaling backhaul data rates due to the abundance of spectrum in the mm wave bands, and the ability to form highly directional, electronically steerable beams. The backhaul design problem is formulated as one of joint routing and resource allocation, accounting for mutual interference across simultaneously active links. A computationally tractable formulation is developed by leveraging the localized nature of interference and the provable existence of a sparse optimal allocation. Numerical results are provided for topologies modeling urban and suburban settings.
Millimeter (mm) wave massive MIMO has the potential for delivering orders of magnitude increases in mobile data rates, with compact antenna arrays providing narrow steerable beams for unprecedented levels of spatial reuse. A fundamental technical bottleneck, however, is rapid spatial channel estimation and beam adaptation in the face of mobility and blockage. Recently proposed compressive techniques which exploit the sparsity of mm wave channels are a promising approach to this problem, with overhead scaling linearly with the number of dominant paths and logarithmically with the number of array elements. Further, they can be implemented with RF beamforming with low-precision phase control. However, these methods make implicit assumptions on long-term phase coherence that are not satisfied by existing hardware. In this paper, we propose and evaluate a noncoherent compressive channel estimation technique which can estimate a sparse spatial channel based on received signal strength (RSS) alone, and is compatible with off-the-shelf hardware. The approach is based on cascading phase retrieval (i.e., recovery of complex-valued measurements from RSS measurements, up to a scalar multiple) with coherent compressive estimation. While a conventional cascade scheme would multiply two measurement matrices to obtain an overall matrix whose entries are in a continuum, a key novelty in our scheme is that we constrain the overall measurement matrix to be implementable using coarsely quantized pseudorandom phases, employing a virtual decomposition of the matrix into a product of measurement matrices for phase retrieval and compressive estimation. Theoretical and simulation results show that our noncoherent method scales almost as well with array size as its coherent counterpart, thus inheriting the scalability and low overhead of the latter.
5 April 2021 in IEEE Transactions on Wireless Communications
Millimeter wave MIMO combines the benefits of compact antenna arrays with a large number of elements and massive bandwidths, so that fully digital beamforming has the potential of supporting a large number of simultaneous users with per user data rates of multiple gigabits/sec (Gbps). In this paper, we develop an analytical model for the impact of nonlinearities in such a system, and illustrate its utility in providing hardware design guidelines regarding two key challenges: the low available precision of analog-to-digital conversion at high sampling rates, and nonlinearities in ultra-high speed radio frequency (RF) and baseband circuits. We consider linear minimum mean square error (LMMSE) reception for a multiuser MIMO uplink, and provide performance guarantees based on two key concepts: (a) summarization of the impact of per-antenna nonlinearities via a quantity that we term the “intrinsic SNR”, (b) using linear MMSE performance in an ideal system without nonlinearities to bound that in our non-ideal system. For our numerical results, we employ nominal parameters corresponding to outdoor picocells operating at a carrier frequency of 140 GHz, with a data rate of 10 Gbps per user.
2 June 2022 in Journal of Signal Processing Systems
This paper presents an algorithm-adaptable, scalable, and platform-portable generator for massive multiple-input multiple-output (MIMO) baseband processing systems. This generator is written in Chisel hardware construction language, and produces instances that implement distributed massive MIMO base station (BS) processing, including channel estimation and beamforming. The generator can be reused for different MIMO systems and hardware datapath designs by changing the parameters. The generator is paired with a Python-based system simulator, which incorporated together can emulate a system testing various baseband signal processing algorithms. The field programmable gate array (FPGA) emulation is performed with generated instances using various parameter values. To demonstrate the algorithmic adaptability, a Golay-sequence-based channel estimation method, a beamspace calibration method, and a channel denoising algorithm are evaluated across a range of channel models. The performance of the generator, necessity of the algorithmic adaptability, and ease of hardware generation are evaluated and discussed. The emulated register-transfer level (RTL) implementation with different system parameters shows that with beamspace methods, the demodulation error vector magnitude is improved by up to 29.8%.