Babetta L Marrone

Dr. Babetta L Marrone


Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 September 2013 in Analytical Chemistry
Verified
Journal Article
Open access
Ye AiYe Ai
Ye Ai
CSClaire Sanders
Claire Sanders
BMBabetta L Marrone
Babetta L Marrone
A microfluidic device was developed to separate heterogeneous particle or cell mixtures in a continuous flow using acoustophoresis. In this device, two identical surface acoustic waves (SAWs) generated by interdigital transducers (IDTs) propagated toward a microchannel, which accordingly built up a standing surface acoustic wave (SSAW) field across the channel. A numerical model, coupling a piezoelectric effect in the solid substrate and acoustic pressure in the fluid, was developed to provide a better understanding of SSAW-based particle manipulation. It was found that the pressure nodes across the channel were individual planes perpendicular to the solid substrate. In the separation experiments, two side sheath flows hydrodynamically focused the injected particle or cell mixtures into a very narrow stream along the centerline. Particles flowing through the SSAW field experienced an acoustic radiation force that highly depends on the particle properties. As a result, dissimilar particles or cells were laterally attracted toward the pressure nodes at different magnitudes, and were eventually switched to different outlets. Two types of fluorescent microspheres with different sizes were successfully separated using the developed device. In addition, Escherichia coli bacteria premixed in peripheral blood mononuclear cells (PBMCs) were also efficiently isolated using the SSAW-base separation technique. Flow cytometric analysis on the collected samples found that the purity of separated E. coli bacteria was 95.65%.

1 August 1999 in The Journal of Immunology
Verified
Journal Article
Open access
PDF file
ZWZaolin Wang
Zaolin Wang
PWP. Scott White
P. Scott White
MPMichelle Petrovic
Michelle Petrovic
OTOwatha L. Tatum
Owatha L. Tatum
LNLee S. Newman
Lee S. Newman
BMBabetta L Marrone
Babetta L Marrone
Chronic beryllium disease (CBD) is associated with the allelic substitution of a Glu69 in the HLA-DPB1 gene. Although up to 97% of CBD patients may have the Glu69 marker, about 30–45% of beryllium-exposed, unaffected individuals carry the same marker. Because CBD occurs in only 1–6% of exposed workers, the presence of Glu69 does not appear to be the sole genetic factor underlying the disease development. Using two rounds of direct automated DNA sequencing to precisely assign HLA-DPB1 haplotypes, we have discovered highly significant Glu69-containing allele frequency differences between the CBD patients and a beryllium-exposed, nondiseased control group. Individuals with DPB1 Glu69 in both alleles were almost exclusively found in the CBD group (6/20) vs the control group (1/75). Whereas most Glu69 carriers from the control group had a DPB1 allele *0201 (68%), most Glu69 carriers from the CBD group had a non-*0201 DPB1 Glu69-carrying allele (84%). The DPB1 allele *0201 was almost exclusively (29/30) associated with DPA1 *01 alleles, while the non-*0201 Glu69-containing DPB1 alleles were closely associated with DPA1 *02 alleles (26/29). Relatively rare Glu69-containing alleles *1701, *0901, and *1001 had extremely high frequencies in the CBD group (50%), as compared with the control group (6.7%). Therefore, the most common Glu69-containing DPB1 allele, *0201, does not seem to be a major disease allele. The results suggest that it is not the mere presence of Glu69, per se, but specific Glu69-containing alleles and their copy number (homozygous or heterozygous) that confer the greatest susceptibility to CBD in exposed individuals.

Verified
Journal Article
Open access
PDF file
JKJihyeon Kim
Jihyeon Kim
NGNevin S. Gupta
Nevin S. Gupta
LBLindsey B Bezek
Lindsey B Bezek
JLJacqueline Linn
Jacqueline Linn
KBKarteek K. Bejagam
Karteek K. Bejagam
KLKwan-Soo Lee
Kwan-Soo Lee
Due to increased environmental pressures, significant research has focused on finding suitable biodegradable plastics to replace ubiquitous petrochemical-derived polymers. Polyhydroxyalkanoates (PHAs) are a class of polymers that can be synthesized by microorganisms and are biodegradable, making them suitable candidates. The present study looks at the degradation properties of two PHA polymers: polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-polyhydroxyvalerate (PHBV; 8 wt.% valerate), in two different soil conditions: soil fully saturated with water (100% relative humidity, RH) and soil with 40% RH. The degradation was evaluated by observing the changes in appearance, chemical signatures, mechanical properties, and molecular weight of samples. Both PHB and PHBV were degraded completely after two weeks in 100% RH soil conditions and showed significant reductions in mechanical properties after just three days. The samples in 40% RH soil, however, showed minimal changes in mechanical properties, melting temperatures/crystallinity, and molecular weight over six weeks. By observing the degradation behavior for different soil conditions, these results can pave the way for identifying situations where the current use of plastics can be replaced with biodegradable alternatives.

13 May 2012 in Microfluidics and Nanofluidics
Verified
Journal Article
Closed access
PDF file
Ye AiYe Ai
Ye Ai
BMBabetta L Marrone
Babetta L Marrone

15 October 2024 in Polymer Chemistry
Verified
Journal Article
Open access
PDF file
JLJessica N. Lalonde
Jessica N. Lalonde
Ghanshyam PilaniaGhanshyam Pilania
Ghanshyam Pilania
BMBabetta L Marrone
Babetta L Marrone
A materials tetrahedron framework is applied to PHA biopolymers to highlight design challenges and frame potential future research exploring structure, property, processing, and performance relationships.

20 July 2020 in Physical Chemistry Chemical Physics
Verified
Journal Article
Closed access
PDF file
KBKarteek K. Bejagam
Karteek K. Bejagam
CICarl N. Iverson
Carl N. Iverson
BMBabetta L Marrone
Babetta L Marrone
Ghanshyam PilaniaGhanshyam Pilania
Ghanshyam Pilania
Polyhydroxyalkanoates (PHAs) represent an emerging class of biosynthetic and biodegradable polyesters that exhibit considerable potential to replace petroleum-based plastics towards a sustainable future. Despite the promise, general structure–property mappings within this class of polymers remain largely unexplored. An efficient exploration of this vast chemical space calls for the development and validation of predictive methods for accurate estimation of a diverse range of properties for PHA-based polymers. Towards this aim, here we present and validate the results of our molecular dynamics (MD) simulation based approach aimed at predicting glass transition temperatures (Tg) of PHA-based polymers. Since generally available and widely used polymer forcefields exhibit a relatively poor performance for Tg predictions, we have developed a new forcefield by modifying the polymer consistent force field (PCFF) via refining a selected set of torsion potentials of the polymer backbone using accurate density functional theory (DFT) computations. After carefully assessing the dependence of critical simulation parameters, such as, polymer chain length, number of polymer chains, supercell size, and thermal quenching rate used in the simulation, the applicability and transferability of the modified PCFF (mPCFF) is demonstrated by directly comparing the computed Tg predictions of various polymers with different chemistries, polymer side chain lengths and functional groups forming the polymer side chains against the respective experimentally measured values. Furthermore, the transport properties such as self-diffusion coefficient and viscosity are computationally determined and their well-known correlation with the target properties is demonstrated. Lastly, we have employed the developed approach to predict Tg values for a number of yet-to-be-synthesized PHA-based polymers with a diverse set of functional groups in the polymer side chains. The results are further rationalized by correlating the predicted Tg values with the inter-chain H-bond formation tendencies of the different side chain functional groups. This work represents an important first step towards computationally guided design of PHA-based functional polymers and opens up new directions for a systematic investigation of composition- and configuration-dependent structure–property relationships in more complex binary and ternary copolymer systems.