Accurate and reliable non-contact temperature sensors are imperative for industrial production and scientific research. Here, Er3+/Tm3+/Yb3+ co-doped NaYF4 phosphors were studied as an optical thermometry material. The typical hydrothermal method was used to synthesize hexagonal Er3+/Tm3+/Yb3+ co-doped NaYF4 phosphors and the morphology was approximately rod-like. The up-conversion emissions of the samples were located at 475, 520, 550, 650, 692 and 800 nm. Thermo-responsive emissions from the samples were monitored to evaluate the relative sensing sensitivity. The thermal coupled energy level- and non-thermal coupled energy level-based luminescence intensity ratio thermometry of the sample demonstrated that these two methods can be used to test temperature. Two green emissions (520 and 550 nm), radiated from 2H11/2/4S3/2 levels, were monitored, and the maximum relative sensing sensitivities reached to 0.013 K−1 at 297 K. The emissions located in the first biological window (650, 692 and 800 nm) were monitored and the maximum relative sensing sensitivities reached to 0.027 (R692/650) and 0.028 K−1 (R692/800) at 297 K, respectively. These results indicate that Er3+/Tm3+/Yb3+ co-doped NaYF4 phosphors have potential applications for temperature determination in the visible and the first biological window ranges.
In this paper, Er3+/Yb3+ codoped Y2(1-x%)Lu2x %O3 solid solution was prepared through the sol-gel method, and the substitution of Y3+ by Lu3+ ions in Y2O3 was confirmed by X-ray diffraction data. The up-conversion emissions of samples under 980 nm excitation and the relative up-conversion processes are investigated. The emission shapes do not vary with the change in doping concentration due to the unaltered cubic phase. The red-to-green ratio changes from 2.7 to 7.8 and then declines to 4.4 as the doping concentration of Lu3+ increases from 0 to 100. The emission lifetimes of green and red have similar variation: the emission lifetime decreases with doping concentration changing from 0 to 60 and rises as the doping concentration continues to increase. The reason why the emission ratio and lifetime change could be originated to the exacerbation of cross-relaxing process and the change of radiative transition probabilities. The temperature-dependent fluorescence intensity ratio (FIR) shows that all samples can be used in noncontact optical temperature sensing, and the method of local structure distortion can be used to improve sensitivity further. The max sensing sensitivities of FIR based on R538/563 and Rred/green reach 0.011 K-1 (483 K) and 0.21 K-1 (300 K). The results display that Er3+/Yb3+ codoped Y2(1-x %)Lu2x %O3 solid solution can be potential candidates for optical temperature sensing in different temperature ranges.
In this study, the up-conversion luminescence and optical temperature sensing properties of Ho3+/Tm3+/Yb3+-co-doped NaLuF4 phosphors were investigated. The visible (475, 540, and 650 nm) and near-infrared light (692 and 800 nm) radiated from 1Ho3+/4Tm3+/Yb3+-co-doped NaLuF4 phosphors were obvious enough for subsequent detection. The slopes in the lnI–lnP plot of the emissions located in the first biological window (650, 692, and 800 nm) were both ∼1.5, which mean that the power had little effect on the three fluorescence peak ratios. Based on the florescence intensity ratios (FIRs) of 650 and 692 nm, the relative sensing sensitivity reaches 0.029 K−1 (476 K). The relative sensing sensitivity based on the FIRs of 800 and 692 nm reaches 0.0076 K−1 (476 K). The results reveal that 1Ho3+/4Tm3+/Yb3+-co-doped NaLuF4 phosphors have potential applications in FIR-based temperature sensing in biological tissue for their high sensing sensitivity. In addition, the emission colors of the sample stabilize in the white light region as the temperature increased from 303 to 467 K, implying that it can also be used in white display.