Zhou Long

Mr. Zhou Long


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
YWYuequan Wang
Yuequan Wang
SZShuhua Zhu
Shuhua Zhu
HLHong-Shuang Li
Hong-Shuang Li
ZLZhou Long
Zhou Long
WYWentao Yi
Wentao Yi
Fiber waviness defects are found in the inner surface of the hat-shaped stringers manufactured by a process system. In order to establish the acceptance criterion for the stringers with the fiber waviness defects, experimental testing and numerical simulation were carried out in this study. Specially induced fiber waviness defects of four pre-defined severity levels were manufactured and tested. A maximum of a 58.1% drop in compressive failure load is observed for the most severe level in the experimental results. A finite element model with progressive damage method and cohesive zone technique was developed to simulate the failure process and the impact of fiber waviness defects. The numerical simulation results of compressive failure load have a good agreement with experimental results qualitatively and quantitatively. In addition, two simple parameters, i.e., aspect ratio A/H and the number of plies with fiber waviness, are proposed to characterize the influence of the fiber waviness on the compressive failure load for the purpose of fast engineering quality checks.

23 November 2022 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
ZLZhou Long
Zhou Long
SZShuhua Zhu
Shuhua Zhu
The presence of fiber waviness defects is well-known to reduce the compressive strength. A FE model was established and the results of failure load and mode were compared with the test results to demonstrate the validity and accuracy. The influence of two parameters L and offset Angle θ of fiber waviness defect was studied. The simulation results show that the compression failure load increases with the increasing of L at constant A/H for convex and concave fiber fold by 33.0% and 20.1% respectively, but there is no significant effect on the failure load with θ within 5%.