The results of simulation by the transfer-matrix method of TiO2/SiO2 double-layer and TiO2/Si3N4/SiO2 triple-layer antireflection coatings for multijunction InGaP/GaAs/Ge heterostructure solar cells are presented. The TiO2/SiO2 double-layer antireflection coating is experimentally developed and optimized. The experimental spectral dependences of the external quantum yield of the InGaP/GaAs/Ge heterostructure solar cell and optical characteristics of antireflection coatings, obtained in the simulation, are used to determine the photogenerated current densities of each subcell in the InGaP/GaAs/Ge solar cell under AM1.5D irradiation conditions (1000 W/m2) and for the case of zero reflection loss. It is shown in the simulation that the optimized TiO2/Si3N4/SiO2 triple-layer antireflection coating provides a 2.3 mA/cm2 gain in the photocurrent density for the Ge subcell under AM1.5D conditions in comparison with the TiO2/SiO2 double-layer antireflection coating under consideration. This thereby provides an increase in the fill factor of the current–voltage curve and in the output electric power of the multijunction solar cell.
The main purpose of this work was to extract valuable metals from EAF dust with the addition of biochar, using microwaves to control and optimize the carbothermical reduction process. To achieve better microwave penetration and the most homogeneous electromagnetic heat source distribution possible in a sample, the content of EAF dust and biochar in centimeter-size spherical particles prepared by the pelletization process was considered to be radially heterogeneous. The content of EAF dust was determined experimentally and the effective permittivity, permeability, and thermal conductivity of the EAF dust as well as biochar–EAF powder mixture were determined using effective medium approximation. The microwave heating of a multilayered pellet of biochar-containing EAF dust was simulated and investigated. The influence of the distribution of the components within the pellet on the effectiveness of the microwave heating was investigated, as was the influence of the biochar conductivity. The interaction of the pellet with both plane waves in free space and with H10 mode waves in a single-mode waveguide was considered. The most optimal distribution of EAF dust and biochar within the pellet for the reduction process was determined.
1 September 2018 in Journal of Physics: Conference Series
Our research is devoted to a more detailed study of the generation of radiation by two-level quantum medium. An electric dipole transition is considered. From the equations of Maxwell-Bloch, the amplitude of the radiation as a function of the phase transition frequency was obtained.
It is known from experimental data that bulk metallic samples reflect microwaves while powdered samples can absorb such radiation and be heated efficiently. In the present paper we investigate theoretically the mechanisms of penetration of microwave radiation through a layer of metallic powder and microwave heating of such system.
1 January 2019 in Izvestiâ Akademii nauk SSSR. Seriâ fizičeskaâ