Dmitrii Alexandrovich Kalganov

Dr. Dmitrii Alexandrovich Kalganov

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2021 in Metals
Verified
Journal Article
Open access
PDF file
AAAnton Anzulevich
Anton Anzulevich
LBLeonid Butko
Leonid Butko
DKDmitrii Alexandrovich Kalganov
Dmitrii Alexandrovich Kalganov
DPDmitrii Pavlov
Dmitrii Pavlov
VTValentin Tolkachev
Valentin Tolkachev
Zhiwei PengZhiwei Peng
Zhiwei Peng
The main purpose of this work was to extract valuable metals from EAF dust with the addition of biochar, using microwaves to control and optimize the carbothermical reduction process. To achieve better microwave penetration and the most homogeneous electromagnetic heat source distribution possible in a sample, the content of EAF dust and biochar in centimeter-size spherical particles prepared by the pelletization process was considered to be radially heterogeneous. The content of EAF dust was determined experimentally and the effective permittivity, permeability, and thermal conductivity of the EAF dust as well as biochar–EAF powder mixture were determined using effective medium approximation. The microwave heating of a multilayered pellet of biochar-containing EAF dust was simulated and investigated. The influence of the distribution of the components within the pellet on the effectiveness of the microwave heating was investigated, as was the influence of the biochar conductivity. The interaction of the pellet with both plane waves in free space and with H10 mode waves in a single-mode waveguide was considered. The most optimal distribution of EAF dust and biochar within the pellet for the reduction process was determined.

1 January 2025 in Reviews on Advanced Materials and Technologies
Verified
Journal Article
Closed access
DKDmitrii Alexandrovich Kalganov
Dmitrii Alexandrovich Kalganov
SPS.A. Philippov
S.A. Philippov
VKVladimir Kaminskii
Vladimir Kaminskii
AIAndrey Yurievich Ivanov
Andrey Yurievich Ivanov
SZS.V. Zasypkin
S.V. Zasypkin
MDMaksim Dorogov
Maksim Dorogov
In this paper, the microstructure and phase composition of magnesium alloys obtained by casting from a furnace charge mixture of the Mg–2.6Y–1Zn–0.5Gd–0.2Zr–0.1Yb system are characterized. It is found that it contains about 10% of the long-period stacking ordered phase. Low-amplitude nonlinear damping and softening of the elastic modulus are studied using the composite piezoelectric resonator method. The time dependence of elasticity and microplasticity is revealed, which is explained by the redistribution of point defects in the elastic fields of dislocations. It has been established that the activation temperature of this mechanism is 227 K, this is confirmed by the presence of the stress relaxation peak on the temperature dependence of damping, as well as the absence of its time dependence at low-temperature deformation of 163 K.

1 January 2024 in Reviews on Advanced Materials and Technologies
Verified
Journal Article
Closed access
VKVladimir Kaminskii
Vladimir Kaminskii
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
DKDmitrii Alexandrovich Kalganov
Dmitrii Alexandrovich Kalganov
ASAlexandr Shchegolkov
Alexandr Shchegolkov
DPD.I. Panov
D.I. Panov
MRM.V. Rozaeva
M.V. Rozaeva
This short review summarizes mechanical interactions occurring in polymer with carbon nanotubes. The work contains a detailed discussion of methods for improving the mechanical characteristics of polymer composites with carbon nanotubes, for which both experimental and computational work in this area are presented. The paper discusses in detail such methods of improving the connection between carbon nanotubes and the polymer as functionalization (covalent and non-covalent), enhancement by embedded nanoparticles and structural modification of the matrix. The review focuses on the molecular dynamics method as one of the promising methods for studying mechanical interactions in polymer composites with carbon nanotubes.

6 February 2026 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
VKVladimir Kaminskii
Vladimir Kaminskii
ASAlexandr Shchegolkov
Alexandr Shchegolkov
DKDmitrii Alexandrovich Kalganov
Dmitrii Alexandrovich Kalganov
DPDmitry Yurievich Panov
Dmitry Yurievich Panov
MDMaksim Dorogov
Maksim Dorogov
ASAleksei Viktorovich Shchegolkov
Aleksei Viktorovich Shchegolkov
This article presents an investigation of the thermomechanical properties of silicone elastomer-based polymer composites modified with carbon nanotubes (CNTs) and mixed fillers (CNTs, bronze, graphite). The primary technique employed was the composite piezoelectric oscillator (CPO) method at approximately 100 kHz. This approach enabled precise measurements of the polymers’ forced oscillation frequency and logarithmic damping decrement (internal friction) across a wide temperature range (80–300 K). The application of this method is novel for this specific class of materials. Scanning electron microscopy confirmed the uniform distribution of the fillers within the polymer matrix. Differential scanning calorimetry (DSC) showed that the fillers modify the thermal stability of the composite. The systematic decrease in the enthalpy of the endothermic decomposition peak suggests a retardation of degradation kinetics, most likely due to a barrier effect of the filler network. Electrical measurements revealed a distinct contrast: the hybrid composite exhibited a frequency-independent conductivity plateau (~1.8 × 10−1 S/m), confirming a robust percolating network, unlike the strong frequency dependence observed for the CNT-only composite. Research shows that the fillers effectively suppress relaxation processes linked to crystallization (205–215 K) and glass transition (165–170 K), as evidenced by a significant reduction in the amplitude of the corresponding internal friction peaks. The most pronounced effect was observed in the composite with mixed fillers, attributable to a synergistic effect between constituents. Furthermore, amplitude-dependent internal friction was found to occur predominantly below the glass transition temperature. The primary objective of the present study is to investigate the dynamic mechanical and damping behavior of CNT-filled silicone composites with mixed fillers under high-frequency loading, using the CPO method. These findings demonstrate the potential for tailoring the stiffness and damping characteristics of these composites for advanced applications in soft robotics and portable electronics.

1 January 2026 in Reviews on Advanced Materials and Technologies
Verified
Journal Article
Closed access
DKDmitrii Alexandrovich Kalganov
Dmitrii Alexandrovich Kalganov
DPD.I. Panov
D.I. Panov
VSV.A. Spiridonov
V.A. Spiridonov
AIAndrey Yurievich Ivanov
Andrey Yurievich Ivanov
ISI.G. Smirnova
I.G. Smirnova
DBD.A. Bauman
D.A. Bauman
In this work, the microstructure and mechanical properties of bulk β Ga2O3:Fe (0.01 mol.%) crystals were investigated using X ray diffraction, optical transmission spectroscopy, and the ultrasonic composite oscillator technique at successive stages of two step annealing at 1400 °C in air. Rocking curves revealed a substantial microstructural evolution, with a more complex profile envelope after 6 hours of annealing and a significant narrowing accompanied by increased reflection intensity after 12 hours. Optical transmission spectra showed an increase in transmittance below 650 nm and a decrease in the long wavelength region. The amplitude dependences of internal friction and the effective elastic modulus were obtained and characterized. Changes in the microplastic yield point under oscillatory deformation and in the background values of these quantities were observed, indicating a reduction in the concentration of mobile defects and microstructural ordering. The effective elastic modulus measured in β Ga2O3:Fe (0.01 mol.%) crystal after annealing along the [100] direction was found to be 339.8 GPa.

1 January 2024 in Reviews on Advanced Materials and Technologies
Verified
Journal Article
Closed access
ASAleksei Viktorovich Shchegolkov
Aleksei Viktorovich Shchegolkov
VKVladimir Kaminskii
Vladimir Kaminskii
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
DKDmitrii Alexandrovich Kalganov
Dmitrii Alexandrovich Kalganov
The article discusses various types of polymer composites with nanomaterials that are intended for strain measurement tasks. Despite the obvious advantages of strain gauges based on polymers modified with dispersed conductive structures, there are problems in creating effective ones that can operate under large deformations with high sensitivity and measurement accuracy. This can be realized by implementation of the strain gauge self-compensation effect when combining a semiconductor material (with negative temperature coefficient of resistance) with high calibration coefficient and metal (with positive temperature coefficient of resistance) as well as improved lifetime characteristics allowing for long-term operation with multiple compression/decompression modes. Carbon nanotubes play an important role in the technologies to create polymer composites for strain measurement tasks. It is also possible to change the properties of such composites by varying the type of polymer matrix. This paper analyzes various designs of strain gauges, as well as methods of calculation and modeling of their performances.