Proton-conducting ceramics (PCCs) are of considerable interest for use in energy conversion and storage applications, electrochemical sensors, and separation membranes. PCCs that combine performance, efficiency, stability, and an ability to operate at low temperatures are particularly attractive. This review summarizes the recent progress made in the development of low-temperature proton-conducting ceramics (LT-PCCs), which are defined as operating in the temperature range of 25–400 °C. The structure of these ceramic materials, the characteristics of proton transport mechanisms, and the potential applications for LT-PCCs will be summarized with an emphasis on protonic conduction occurring at interfaces. Three temperature zones are defined in the LT-PCC operating regime based on the predominant proton transfer mechanism occurring in each zone. The variation in material properties, such as crystal structure, conductivity, microstructure, fabrication methods required to achieve the requisite grain size distribution, along with typical strategies pursued to enhance the proton conduction, is addressed. Finally, a perspective regarding applications of these materials to low-temperature solid oxide fuel cells, hydrogen separation membranes, and emerging areas in the nuclear industry including off-gas capture and isotopic separations is presented.

Mixed ionic–electronic conductors are widely used in devices for energy conversion and storage. Grain boundaries in these materials have nanoscale spatial dimensions, which can generate substantial resistance to ionic transport due to dopant segregation. Here, we report the concept of targeted phase formation in a Ce_0.8Gd_0.2O_2−δ–CoFe₂O₄ composite that serves to enhance the grain boundary ionic conductivity. Using transmission electron microscopy and spectroscopy approaches, we probe the grain boundary charge distribution and chemical environments altered by the phase reaction between the two constituents. The formation of an emergent phase successfully avoids segregation of the Gd dopant and depletion of oxygen vacancies at the Ce_0.8Gd_0.2O_2−δ–Ce_0.8Gd_0.2O_2−δ grain boundary. This results in superior grain boundary ionic conductivity as demonstrated by the enhanced oxygen permeation flux. This work illustrates the control of mesoscale level transport properties in mixed ionic–electronic conductor composites through processing induced modifications of the grain boundary defect distribution.

We report multimodal scanning hard x-ray imaging with spatial resolution approaching 10 nm and its application to contemporary studies in the field of material science. The high spatial resolution is achieved by focusing hard x-rays with two crossed multilayer Laue lenses and raster-scanning a sample with respect to the nanofocusing optics. Various techniques are used to characterize and verify the achieved focus size and imaging resolution. The multimodal imaging is realized by utilizing simultaneously absorption-, phase-, and fluorescence-contrast mechanisms. The combination of high spatial resolution and multimodal imaging enables a comprehensive study of a sample on a very fine length scale. In this work, the unique multimodal imaging capability was used to investigate a mixed ionic-electronic conducting ceramic-based membrane material employed in solid oxide fuel cells and membrane separations (compound of Ce _0.8 Gd _0.2 O _{2− x} and CoFe ₂ O ₄ ) which revealed the existence of an emergent material phase and quantified the chemical complexity at the nanoscale.

Mixed ionic‐electronic conducting (MIEC) membranes have gained growing interest recently for various promising environmental and energy applications, such as H₂ and O₂ production, CO₂ reduction, O₂ and H₂ separation, CO₂ separation, membrane reactors for production of chemicals, cathode development for solid oxide fuel cells, solar‐driven evaporation and energy‐saving regeneration as well as electrolyzer cells for power‐to‐X technologies. The purpose of this roadmap, written by international specialists in their fields, is to present a snapshot of the state‐of‐the‐art, and provide opinions on the future challenges and opportunities in this complex multidisciplinary research field. As the fundamentals of using MIEC membranes for various applications become increasingly challenging tasks, particularly in view of the growing interdisciplinary nature of this field, a better understanding of the underlying physical and chemical processes is also crucial to enable the career advancement of the next generation of researchers. As an integrated and combined article, it is hoped that this roadmap, covering all these aspects, will be informative to support further progress in academics as well as in the industry‐oriented research toward commercialization of MIEC membranes for different applications.