This article aims to highlight the possibilities of inclusive innovation provided by the ChatGPT Artificial Intelligence Model through the development of projects that apply the Internet of Things (IoT) together with Arduino Embedded Systems. Inclusive innovation, considered as a path towards sustainable development, refers to the creation of new goods and services conceived for, by and with those who have been marginalized from the mainstream of development, particularly those people living in poverty who coexist with the higher income strata in society. Today, innovation drives the generation of new technological projects in need and demand. Through the Internet of Things (IoT) and Arduino Embedded Systems, which are designed to fulfill one or more functions through microcontrollers in real time, significant popularity has been achieved in the field of education and applied research. It is in these fields where the ChatGPT Model plays a crucial role in the progress of these areas. The methodology implemented consists of a Participatory Action Research with a qualitative approach, which was developed in the following cycles: 1. Planning of the intervention, 2. The intervention instrument selected was the Field Diaries on Digital Boards. As a result of this research, the development of Digital Educational Resources that contribute to the educational processes in the development of Free Software and Hardware was achieved. With this, the development of Digital Educational Resources for the Computer Engineering program was achieved.
18 April 2018 in Geotechnical and Geological Engineering
Hydrocarbon reservoirs can be subjected to temperature changes due to different processes during production. Heat injection has become an advantageous method to produce heavy oils in Canada and Venezuela because it increases oil recovery. The heat reduces oil viscosity and oil flows easily. Colombia has significant heavy oil reserves in unconsolidated silty sandstones. It is important to understand the mechanical behavior of these reservoirs in thermal recovery conditions (temperature and effective stress). The reconstituted samples from a Colombian heavy oil outcrop were evaluated using a high-temperature and high-pressure triaxial cell. Twelve isotropically consolidated drained triaxial tests were conducted at three different effective stresses (0.4, 4.0, and 8.2 MPa) and a temperature range from 50 to 230 °C to represent the initial and thermal recovery conditions, and obtain parameters, such as Young’s and Bulk moduli, internal friction angle, and cohesion. The samples at higher confining stress (4.0 and 8.2 MPa) were under contraction, while samples at lower confining stress (0.4 MPa) were under dilation. The stiffness increased as the confining stress increased and decreased as temperature increased, and the strength properties significantly decreased as temperature increased. Finally, the Colombian samples exhibited low friction angles when compared to clean sandstones as Canadian sands.
1 September 2018 in Journal of Petroleum Science and Engineering
Sand production is a common phenomenon in oil and gas reservoirs, which occurs when reservoir fluids exert a sufficient drag force on reservoir rocks to erode the matrix. Numerical models for sand production have been used to understand the sanding mechanisms and forecast sand-production potential of formations to design well completion, optimize production, and prevent setbacks in future operations. This paper presents a mathematical model for defining the conditions of sanding onset as well as to predict and quantify the sand rate. We also introduce fluid-flow coupling and a geomechanical and sand-production model. By using the proposed model and a set of experimental data, sanding-related variables are analyzed, and a matching process for the simulated results and forecast analysis are performed. The results show that elastoplastic constitutive models are indispensable, and a clear relationship exists between the sanding and plastic strains.