Density functional theory calculations of the layer (L)-dependent electronic band structure, work function and optical properties of β-InSe have been reported. Owing to the quantum size effects (QSEs) in β-InSe, the band structures exhibit direct-to-indirect transitions from bulk β-InSe to few-layer β-InSe. The work functions decrease monotonically from 5.22 eV (1 L) to 5.0 eV (6 L) and then remain constant at 4.99 eV for 7 L and 8 L and drop down to 4.77 eV (bulk β-InSe). For optical properties, the imaginary part of the dielectric function has a strong dependence on the thickness variation. Layer control in two-dimensional layered materials provides an effective strategy to modulate the layer-dependent properties which have potential applications in the next-generation high performance electronic and optoelectronic devices.
Quasi‐2D perovskite quantum wells are increasingly recognized as promising candidates for direct‐conversion X‐ray detection. However, the fabrication of oriented and uniformly thick quasi‐2D perovskite films, crucial for effective high‐energy X‐ray detection, is hindered by the inherent challenges of preferential crystallization at the gas‐liquid interface, resulting in poor film quality. In addressing this limitation, a carbonyl array‐synergized crystallization (CSC) strategy is employed for the fabrication of thick films of a quasi‐2D Ruddlesden‐Popper (RP) phase perovskite, specifically PEA2MA4Pb5I16. The CSC strategy involves incorporating two forms of carbonyls in the perovskite precursor, generating large and dense intermediates. This design reduces the nucleation rate at the gas‐liquid interface, enhances the binding energies of Pb2+ at (202) and (111) planes, and passivates ion vacancy defects. Consequently, the construction of high‐quality thick films of PEA2MA4Pb5I16 RP perovskite quantum wells is achieved and characterized by vertical orientation and a pure well‐width distribution. The corresponding PEA2MA4Pb5I16 RP perovskite X‐ray detectors exhibit multi‐dimensional advantages in performance compared to previous approaches and commercially available a‐Se detectors. This CSC strategy promotes 2D perovskites as a candidate for next‐generation large‐area flat‐panel X‐ray detection systems.
In this work, Ti3C2, which has a loosely packed accordion-like structure in transition metal carbide (MXene) form, is fabricated and adsorbed by three metal ions (Fe3+/Co2+/Ni2+). The electromagnetic interference (EMI) shielding performance of Ti3C2 and Ti3C2:Fe3+/Co2+/Ni2+ films is researched in detail, demonstrating that the EMI shielding effectiveness can be improved by adsorbing by Fe3+/Co2+/Ni2+ ions because the metal ion adsorbing can improve the absorption efficiency via electromagnetic wave scattering. The studied Ti3C2:Fe3+/Co2+/Ni2+ films can be used as good EMI shielding materials for communications, electronics, military, and other applications.
The BP/InSe heterojunction has attracted the attention of many fields in successful combined high hole mobility of black phosphorus (BP) and high electron mobility of indium selenide (InSe), and enhanced the environmental stability of BP. Nevertheless, photonics research on the BP/InSe heterostructure was insufficient, while both components are considered promising in the field. In this work, a two-dimensional (2D) BP/InSe heterostructure was fabricated using the liquid-phase exfoliation method. Its linear and non-linear optical (NLO) absorption was characterized by ultraviolet−visible−infrared and Open-aperture Z-scan technology. On account of the revealed superior NLO properties, an SA based on 2D BP/InSe was prepared and embedded into an erbium-doped fiber laser, traditional soliton pulses were observed at 1.5 μm with the pulse duration of 881 fs. Furthermore, harmonic mode locking of bound solitons and dark-bright soliton pairs were also obtained in the same laser cavity due to the cross-coupling effect. The stable mode-locked operation can be maintained for several days, which overcome the low air stability of BP. This contribution further proves the excellent optical properties of 2D BP/InSe heterostructure and provides new probability of developing nano-photonics devices for the applications of double pulses laser source and long-distance information transmission.
Sodium-ion batteries (SIBs) as a replaceable energy storage technology have attracted extensive attention in recent years. The design and preparation of advanced anode materials with high capacity and excellent cycling performance for SIBs still face enormous challenges. Herein, a solution method is developed for in situ synthesis of anti-aggregation tellurium nanorods/reduced graphene oxide (Te NR/rGO) composite. The material working as the sodium-ion battery (SIB) anode achieves a high reversible capacity of 338 mAh g−1 at 5 A g−1 and exhibits up to 93.4% capacity retention after 500 cycles. This work demonstrates an effective preparation method of nano-Te-based composites for SIBs.