A layer-by-layer deposition of two conducting polymers, each layer of which is a few tenths of nanometer thick, has been successfully performed to enhance the thermoelectric power factor of organic thin films, which are critical components of flexible thermoelectric energy harvesting devices. The multilayer films were deposited via multiple solution processes, which exhibit enhanced electrical conductivity without any significant degradation of the Seebeck coefficient, in contrast to a coupling behavior between the electrical conductivity and the Seebeck coefficient in bulk materials. The electrical conductivity and power factor—proportional to the electrical conductivity—of 5(PEDOT:PSS/PANI–CSA) multilayer films are 1.3 and 2 times higher than those of a single PEDOT:PSS layer. Transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS) reveal distinct interfaces through which an enhanced electrical conductivity and power factor have been achieved in our multilayer films. From the TEM, EELS, and Raman analyses, a model for the enhancement of the electrical conductivity has been proposed. The enhancement of electrical conductivity occurs via stretching of PEDOT and PANI chains and hole diffusion from the PANI–CSA layer to the PEDOT:PSS layer. The band alignment in the multilayer structure not only enhances electrical conductivity but also maintains the Seebeck coefficient at an optimum value. Our study suggests that the layer-by-layer deposition of polymer thin films is a promising technique for manipulating the thermoelectric properties of each polymer component to enhance thermoelectric performance.
Phosphor-converted white light-emitting diodes (pc-WLEDs) are excellent energy-efficient light sources for artificial lighting applications. One goal of artificial lighting is to make objects/images look natural – as they look under the sunlight. The ability of a light source to accurately render the natural color of an object is gauged by the parameter – color rendering index (CRI). A conventional pc-WLED has an average CRI ~ 80, which is very low for accurate color reproduction. To utilize the pc-WLEDs for artificial lighting applications, all the CRI points (R1 – R15) should be above 95. However, there is a trade-off between CRI and luminous efficacy (LER), and it is challenging to increase both CRI and LER. Herein we propose a novel LED package (PKG) design to achieve CRI points ≥95 and efficiency ~100 lm/W by introducing two blue LEDs and a UV LED in combination with green and red phosphors. The silicone encapsulant, the current through the LEDs, and the green/red phosphor ratio were optimized for achieving high CRI and LER. Our re-designed LED PKG will find applications in stadium lighting as well as for ultra-high-definition television production where high CRI points are required for the artificial light source.
To meet the requirement of electromagnetic compatibility in various portable electronic devices, electromagnetic interference shielding effectiveness (EMISE) is one of the key parameters. Here, we demonstrate that a polymer composite film comprising two polymers poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)] and poly(3,4-ethylene dioxythiophene) polystyrene sulfonate (PEDOT:PSS) with good mechanical flexibility provides an effective electromagnetic interference (EMI) shielding. Dielectric properties of P(VDF-TrFE) and PEDOT:PSS composites in radio frequency ranges (10 MHz–1 GHz) have been utilized to calculate the EMI shielding properties in both near-field and far-field regions. The shielding properties for far-field region are also measured using the coaxial transmission method to verify the calculated result. The morphology of the obtained films was investigated by scanning electron microscopy, and the crystallinity of the composite films was investigated by X-ray diffraction and differential scanning calorimetry. The fabricated films with a thickness of ∼0.08 mm exhibit excellent EMI shielding properties. The films can be directly molded to a required shape with good mechanical strength. The film can find its application in fabricating electromagnetic compatible portable electronic devices mainly in the medical field where the EMISE measurement are made in the near field. Also the thickness of the shielding film will have minimum effect on the overall dimensions of device.