This paper proposes a co-estimation scheme of state of charge (SOC), state of health (SOH), and state of function (SOF) for lithium-ion batteries in electric vehicles. The co-estimation denotes that the SOC, SOH and SOF are estimated simultaneously in real-time application. The model-based SOC estimation is fulfilled by the Extended Kalman Filter (EKF). The battery parameters related with the battery SOH and SOF are online identified using the Recursive Least Square (RLS) algorithm with a forgetting factor. The capacity and the maximum available output power are then estimated based on the identified parameters. The online update of the capacity and correlated parameters help improve the accuracy of the state estimation but with limited increase in the computation load, by making good use of the correlations among the states. The co-estimation scheme is validated in a real Battery Management System (BMS) with good real-time performance and convincible estimation accuracy.
22 July 2019 in IEEE Transactions on Vehicular Technology
The online estimation of battery state-of-health is an ever significant issue for the intelligent energy management of the autonomous electric vehicles. Machine-learning based approaches are promising for online state-of-health estimation. This paper proposes a machine-learning based algorithm for the online state-of-health estimation of Li-ion battery. A predictive diagnosis model used in the algorithm is established based on support vector machine (SVM). The support vectors, which reflects the intrinsic characteristics of the Li-ion battery, are determined from the charging data of fresh cells. Furthermore, the coefficients of the SVMs for cells at different state-of-health are identified once the support vectors are determined. The algorithm functions by comparing partial charging curves with the stored SVMs. Similarity factor is defined after comparison to quantify the state-of-health of the data under evaluation. The operation of the algorithm only requires partial charging curves, e.g. 15min charging curves, making fast on-board diagnosis of battery state-of-health into reality. The partial charging curves can be intercepted from a wide range of voltage section, thereby relieving the pain that there is little chance that the driver charges the battery pack from a predefined state-of-charge. Train, validation, and test are conducted for two commercial Li-ion batteries with Li(NiCoMn)1/3O2 cathode and graphite anode, indicating that the algorithm can estimate the battery state-of-health with less than 2% error for 80% of all the cases, and less than 3% error for 95% of all the cases.
8 June 2021 in International Journal of Energy Research
The lithium titanium oxide (LTO) anode is widely accepted as one of the best anodes for the future lithium ion batteries in electric vehicles (EVs), especially since its cycle life is very long. In this paper, three different commercial LTO cells from different manufacturers were studied in accelerated cycle life tests and their capacity fades were compared. The result indicates that under 55 °C, the LTO battery still shows a high capacity fade rate. The battery aging processes of all the commercial LTO cells clearly include two stages. Using the incremental capacity (IC) analysis, it could be judged that in the first stage, the battery capacity decreases mainly due to the loss of anode material and the degradation rate is lower. In the second stage, the battery capacity decreases much faster, mainly due to the degradation of the cathode material. The result is important for the state of health (SOH) estimation and remaining useful life (RUL) prediction of battery management system (BMS) for LTO batteries in EVs.
Lithium-ion batteries on electric vehicles have been increasingly deployed for the enhancement of grid reliability and integration of renewable energy, while users are concerned about extra battery degradation caused by vehicle-to-grid (V2G) operations. This paper details a multi-year cycling study of commercial 24 Ah pouch batteries with Li(NiMnCo)O2 (NCM) cathode, varying the average state of charge (SOC), depth of discharge (DOD), and charging rate by 33 groups of experiment matrix. Based on the reduced freedom voltage parameter reconstruction (RF-VPR), a more efficient non-intrusive diagnosis is combined with incremental capacity (IC) analysis to evaluate the aging mechanisms including loss of lithium-ion inventory and loss of active material on the cathode and anode. By analyzing the evolution of indicator parameters and the cumulative degradation function (CDF) of the battery capacity, a non-linear degradation model with calendar and cyclic aging is established to evaluate the battery aging cost under different unmanaged charging (V0G) and V2G scenarios. The result shows that, although the extra energy throughput would cause cyclic degradation, discharging from SOC 90 to 65% by V2G will surprisingly alleviate the battery decaying by 0.95% compared to the EV charged within 90–100% SOC, due to the improvement of calendar life. By optimal charging strategies, the connection to the smart grid can potentially extend the EV battery life beyond the scenarios without V2G.
Incremental capacity analysis (ICA) has been used pervasively to characterize the degradation mechanisms of the lithium-ion batteries, and several online state-of-health estimation algorithms are built based on ICA. However, the stairs and the noises in the discrete sampled voltage data obstruct the calculation of the capacity differentiation over voltage (dQ/dV), therefore we need methods to fit the sampled voltage first. In this paper, the support vector regression (SVR) algorithm is used to smooth the sampled voltage curve using Gaussian kernels. A parametric study has been conducted to show how to enhance the performances of the SVR algorithm, including (1) speeding up the algorithm by downsampling; (2) avoiding overfitting and under-fitting using proper standard deviation σ in the Gaussian kernel; (3) making precise capture of the characteristic peaks. A novel method using linear approximation has been proposed to help judge the accuracy of the SVR algorithm in tracking the ICA peaks. And advanced SVR algorithms using double σ and using cost function that directly regulates the differentiation result have been proposed. The advanced SVR algorithm can make accurate curve fitting for ICA with overall error less than 1% (maximum 3%) throughout cycle lives, for four kinds of commercial lithium-ion batteries with LiFePO4 and LiNixCoyMnzO2 cathodes, making it promising to be further applied in online SOH estimation algorithms.