Kyparisis Papadopoulos

Mr. Kyparisis Papadopoulos

Aristotle University, Thessaloníki, Kentrikí Makedonía, Greece
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 October 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
DTDESPOINA TSELEKIDOU
DESPOINA TSELEKIDOU
KPKyparisis Papadopoulos
Kyparisis Papadopoulos
VKVasileios Kyriazopoulos
Vasileios Kyriazopoulos
KAKonstantinos C. Andrikopoulos
Konstantinos C. Andrikopoulos
AAAikaterini K Andreopoulou
Aikaterini K Andreopoulou
MGMaria Gioti
Maria Gioti
In this study, novel copolymers consisting of blue and red chromophores are presented to induce emission tuning, enabling the definition of white light emission in a single polymeric layer. These aromatic polyether sulfones exhibit high molecular weights, excellent solubility and processability via solution deposition techniques. In addition, by carefully controlling the molar ratios of chromophores composition, the energy transfer mechanism, from blue to red chromophores, takes place enabling us to define properly the emission covering the entire range of the visible spectrum. The optical and photophysical properties of the monomers and copolymers were thoroughly investigated via NIR-Vis-far UV Spectroscopic Ellipsometry (SE), Absorbance and Photoluminescence (PL). These copolymers are used as an emissive layer and applied in solution-processed WOLED devices. The fabricated WOLED devices have been subsequently studied and characterized in terms of their electroluminescence properties. Finally, the WOLED devices possess high color stability and demonstrate CIE Coordinates (0.33, 0.38), which approach closely the pure white light CIE coordinates.

10 October 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
DTDESPOINA TSELEKIDOU
DESPOINA TSELEKIDOU
KPKyparisis Papadopoulos
Kyparisis Papadopoulos
KAKonstantinos C. Andrikopoulos
Konstantinos C. Andrikopoulos
AAAikaterini K Andreopoulou
Aikaterini K Andreopoulou
Joannis KallitsisJoannis Kallitsis
Joannis Kallitsis
MGMaria Gioti
Maria Gioti
Polymers containing π-conjugated segments are a diverse group of large molecules with semiconducting and emissive properties, with strong potential for use as active layers in Organic Light-Emitting Diodes (OLEDs). Stable blue-emitting materials, which are utilized as emissive layers in solution-processed OLED devices, are essential for their commercialization. Achieving balanced charge injection is challenging due to the wide bandgap between the HOMO and LUMO energy levels. This study examines the optical and photophysical characteristics of blue-emitting polymers to contribute to the understanding of the fundamental mechanisms of color purity and its stability during the operation of OLED devices. The investigated materials are a novel synthesized lab scale polymer, namely poly[(2,7-di(p-acetoxystyryl)-9-(2-ethylhexyl)-9H-carbazole-4,4′-diphenylsulfone)-co-poly(2,6-diphenylpyrydine-4,4′-diphenylsulfone] (CzCop), as well as three commercially supplied materials, namely Poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO), poly[9,9-bis(2′-ethylhexyl) fluorene-2,7-diyl] (PBEHF), and poly (9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole) (F6PC). The materials were compared to evaluate their properties using Spectroscopic Ellipsometry, Photoluminescence, and Atomic Force Microscopy (AFM). Additionally, the electrical characteristics of the OLED devices were investigated, as well as the stability of the electroluminescence emission spectrum during the device’s operation. Finally, the determined optical properties, combined with their photo- and electro-emission characteristics, provided significant insights into the color stability and selectivity of each material.

21 November 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MGMaria Gioti
Maria Gioti
DTDESPOINA TSELEKIDOU
DESPOINA TSELEKIDOU
VFVasileios Foris
Vasileios Foris
VKVasileios Kyriazopoulos
Vasileios Kyriazopoulos
KPKyparisis Papadopoulos
Kyparisis Papadopoulos
SLStergios Logothetidis
Stergios Logothetidis
Obtaining white light from organic LEDs is a considerable challenge and, to realize white light emission, many studies have been conducted, primarily addressing two- or three-color blend systems as a promising strategy. In this work, pristine films, grown by spin coating, consisting of commercial blue Poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO), green Poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT), and red spiro-copolymer (SPR) light-emitting materials, were studied as reference materials. Afterward, binary (SPR doped in host PFO) and ternary (SPR and F8BT doped in host PFO) thin films were successfully prepared with various ratios. The characterization of the as-grown and thermally-treated blend films was focused on their optical and photophysical properties. After, the fabrication of OLED devices on glass substrates was carried out for the evaluation of a blend’s composition and annealing in terms of the devices’ electrical characteristics and electro-emission properties in order to achieve white light emission. Their analysis provided insights into the energy transfer mechanisms between the constituent materials, which were correlated to host–guest interactions as well as to the structural changes originated by thermal treatment, leading to the crystallization of PFO. Finally, the OLEDs based on ternary blends approach the white light emission with (x, y) of (0.272, 0.346). These fabricated devices also exhibit turn-on voltages as low as 3 V, accompanied by remarkable luminance values above 3000 cd/m2.

18 July 2025 in ACS Applied Electronic Materials
Verified
Journal Article
Open access
KPKyparisis Papadopoulos
Kyparisis Papadopoulos
DTDespoina Tselekidou
Despoina Tselekidou
SLStergios Logothetidis
Stergios Logothetidis
MGMaria Gioti
Maria Gioti

26 October 2022 in Photonics
Verified
Journal Article
Open access
PDF file
DTDESPOINA TSELEKIDOU
DESPOINA TSELEKIDOU
LPLazaros Panagiotidis
Lazaros Panagiotidis
KPKyparisis Papadopoulos
Kyparisis Papadopoulos
VKVasileios Kyriazopoulos
Vasileios Kyriazopoulos
MGMaria Gioti
Maria Gioti
In this work, we present the fabrication and characterization of solution-processable red Phosphorescent Organic Light-Emitting Diodes (PhOLEDs). The proposed approach is based on Ir(III) complex, namely Bis(2-(3,5-dimethylphenyl)quinoline-C,N)(acetylacetonato)Iridium(III), also known as Ir(dmpq)2(acac), which was doped in four different host materials: (a) 4,4′-Bis(N-carbazolyl)-1,1′-biphenyl (CBP), (b) 1,3-Bis(N-carbazolyl)benzene (mCP), (c) 1,1-Bis[(di-4-tolylamino) phenyl]cyclohexane (TAPC), and (d) tris(4-carbazoyl-9-ylphenyl)amine (TCTA). The metal–organic complex offers unique optical and electronic properties arising from the interplay between the inorganic metal and the organic material. The optical and photophysical properties of the produced thin films are investigated in detail using spectroscopic ellipsometry and photoluminescence, whereas the structural characteristics are examined by atomic force microscopy. This comparative study of the four different Host:Ir-complex systems provides valuable information to evaluate the emission characteristics in order to achieve pure red light. Finally, these materials were applied as a single-emissive layer in PhOLED devices, and the electroluminescence characteristics were studied.

7 October 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
KPKyparisis Papadopoulos
Kyparisis Papadopoulos
DTDESPOINA TSELEKIDOU
DESPOINA TSELEKIDOU
AZAlexandros Zachariadis
Alexandros Zachariadis
ALArgiris Laskarakis
Argiris Laskarakis
SLStergios Logothetidis
Stergios Logothetidis
MGMaria Gioti
Maria Gioti
A systematic investigation of optical, electrochemical, photophysical, and electrooptical properties of printable green color-emitting polymer (poly(9,9-dioctylfluorene-alt-bithiophene)) (F8T2) and spiro-copolymer (SPG-01T) was conducted to explore their potentiality as an emissive layer for wearable polymer light-emitting diode (PLED) applications. We compared the two photoactive polymers in terms of their spectral characteristics and color purity, as these are the most critical factors for wearable lighting sources and optical sensors. Low-cost, solution-based methods and facile architecture were applied to produce rigid and flexible light-emitting devices with high luminance efficiencies. Emission bandwidths, color coordinates, operational characteristics, and luminance were also derived to evaluate the device’s stability. The tuning of emission’s spectral features by layer thickness variation was realized and was correlated with the interplay between H-aggregates and J-aggregates formations for both conjugated polymers. Finally, we applied the functional green light-emitting PLED devices based on the two studied materials for the detection of Rhodamine 6G. It was determined that the optical detection of the R6G photoluminescence is heavily influenced by the emission spectrum characteristics of the PLED and changes in the thickness of the active layer.