Da-Chen Pang

Dr. Da-Chen Pang

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2017 in Sensors
Verified
Journal Article
Open access
PDF file
DPDa-Chen Pang
Da-Chen Pang
CCCheng-Min Chang
Cheng-Min Chang
This paper presents the world’s first transparent flexible capacitive micromachined ultrasonic transducer (CMUT) that was fabricated through a roll-lamination technique. This polymer-based CMUT has advantages of transparency, flexibility, and non-contacting detection which provide unique functions in display panel applications. Comprising an indium tin oxide-polyethylene terephthalate (ITO-PET) substrate, SU-8 sidewall and vibrating membranes, and silver nanowire transparent electrode, the transducer has visible-light transmittance exceeding 80% and can operate on curved surfaces with a 40 mm radius of curvature. Unlike the traditional silicon-based high temperature process, the CMUT can be fabricated on a flexible substrate at a temperature below 100 °C to reduce residual stress introduced at high temperature. The CMUT on the curved surfaces can detect a flat target and finger at distances up to 50 mm and 40 mm, respectively. The transparent flexible CMUT provides a better human-machine interface than existing touch panels because it can be integrated with a display panel for non-contacting control in a health conscious environment and the flexible feature is critical for curved display and wearable electronics.

2 June 2016 in Sensors
Verified
Journal Article
Open access
PDF file
GBGia Thinh Bui
Gia Thinh Bui
YCYu-Tsung Chiang
Yu-Tsung Chiang
DPDa-Chen Pang
Da-Chen Pang
This paper presents a new wind speed measurement method using a single capacitive micro-machined ultrasonic transducer (CMUT). The CMUT was arranged perpendicular to the direction of the wind flow, and a reflector was set up a short distance away, facing the CMUT. To reduce the size, weight, cost, and power consumption of conventional ultrasonic anemometers this study proposes two CMUT designs for the measurement of wind speed using either the amplitude of the signal or the time of flight (TOF). Each CMUT with a double array element design can transmit and receive signals in five different operation modes. Experiments showed that the two CMUT designs utilizing the TOF were better than those utilizing the amplitude of the signal for wind speed measurements ranging from 1 m/s to 10 m/s, providing a measurement error of less than 0.2 m/s. These results indicate that the sensitivity of the TOF is independent of the five operation modes.

15 January 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Yaw-Hong KangYaw-Hong Kang
Yaw-Hong Kang
DPDa-Chen Pang
Da-Chen Pang
YZYi-Ching Zeng
Yi-Ching Zeng
This study employs four metaheuristic optimization methods to optimize the dimensional synthesis of Ackermann steering mechanisms for three-axle, six-wheeled vehicles with front-axle steering mode and reverse-phase steering mode. The employed optimization methods include Particle Swarm Optimization (PSO), Hybrid Particle Swarm Optimization (HPSO), Differential Evolution with golden ratio (DE-gr), and Linearly Ensemble of Parameters and Mutation Strategies in Differential Evolution (L-EPSDE). With a front-wheel steering angle range of 70 degrees, two hundred optimization experiments were conducted for each method, and statistical analyses revealed that DE-gr and L-EPSDE methods outperformed PSO and HPSO methods in terms of standard deviation, mean value, and minimum error. These two methods exhibited superior convergence stability, faster convergence, and higher accuracy compared to PSO and HPSO. Reverse-phase (K = 1) steering mode outperformed front-axle steering mode, delivering reduced steering errors and turning radii. Considering the transmission ratio of front to rear axle (K) as a design variable in reverse-phase steering mode increased design flexibility and significantly lowered steering errors for the front and rear axle steering mechanisms. However, this comes with a slight increase in the turning radius of the vehicle’s front part compared to when K = 1. The optimized mechanism, designed using the DE-gr method, was validated through kinematic simulations and steering analyses using MSC-ADAMS v2015 software, further confirming the effectiveness and reliability of the proposed design.

2 June 2017 in Micromachines
Verified
Journal Article
Open access
PDF file
DPDa-Chen Pang
Da-Chen Pang
YLYi-Wei Lai
Yi-Wei Lai
This study proposed a rapid prototyping fabrication method for micromotors that allowed us to develop both 1 mm and 1.5 mm diameter permanent-magnet synchronous motors (PMSMs) with an optical rotary encoder. First, an integrated electroforming method was proposed for combining stator housing and flexible print circuit (FPC) coils to ease the manufacturing and assembly of micromotor components. This is particularly useful in the production of prototypes or small volumes of units. Second, an optical encoder was used to detect the rotational angle by means of a reflective code disk, an optical fiber, and a photo-detector. The micromotor was built with a code disk and an optical fiber. The code disk was designed to match the optical fiber and was made by photolithography and sputtering. Both the 1 mm and 1.5 mm diameter motors successfully achieved a rotational speed over 20,000 RPM and due to a 50 µm diameter optical fiber core, the encoders showed a resolution of 12 and 18 pulses per revolution (PPR), respectively.

27 August 2020 in Energies
Verified
Journal Article
Open access
PDF file
DPDa-Chen Pang
Da-Chen Pang
ZSZhen-Jia Shi
Zhen-Jia Shi
PXPei-Xuan Xie
Pei-Xuan Xie
HHHua-Chih Huang
Hua-Chih Huang
GBGia-Thinh Bui
Gia-Thinh Bui
This paper presents the world’s smallest inset permanent magnet synchronous motor (PMSM) with a soft magnetic composite (SMC) core, providing ease of manufacturing for micromachine applications without silicon steel laminations. The inset motor can offer an additional reluctance torque and higher torque density with a lower usage amount of permanent magnet. A 15 mm diameter inset motor was developed with the thickness of a tile-type permanent magnet which is limited to 1 mm by the manufacturer. The motor was designed with high torque density and low torque ripple by varying the interpole iron width for the rotor. Two inset motors were made using both SMC and silicon steel materials for comparison. The performance of the SMC motor was inferior to the silicon steel motor, but it still meets the specifications of the commercial market. If the thickness of the tile-type permanent magnet is further reduced, the micro inset motor with a SMC core can be easily mass-manufactured using powder sintering.

16 October 2018 in Energies
Verified
Journal Article
Open access
PDF file
DPDa-Chen Pang
Da-Chen Pang
CWCHIH-TING WANG
CHIH-TING WANG
This study proposes a novel, axial-flux, single-phase switched reluctance motor for micro machines with wireless-driven capability. The rotor and stator each have two poles, and the stator utilizes two permanent magnets to provide the required parking position and rotational torque. By reducing the number of magnetic poles and coils in the stator, and by utilizing a cylindrical design for its stator components, the micro motor is able to be easily manufactured and assembled. Safety and convenience are also achieved through the use of a wireless drive, which negates the need for power connections or batteries. This study utilizes the topology method in rotor design to reduce excessive torque ripple. For this study, an actual micro, axial-flux, single-phase switched reluctance motor with a diameter of 5.5 mm and length of 4.4 mm was built in combination with a wireless charging module and motor circuitry found on the market. With an induced current of 0.7 A, the motor achieved a maximum of 900 rpm, indicating possible applications with respect to toys, micro-pumps, dosing pumps, and vessels for gases, liquids, or vacuum that do not require feedthrough.