This paper presents the concept, design, fabrication, application and experimental validation of a new type of composite sandwich matting. The composite sandwich matting comprises a paulownia woods as core material and glass fiber reinforced plastic (GFRP) as face-skins and lattice-webs. The matting was fabricated by vacuum infusion moulding process (VIMP). The mechanical properties of the component materials were studied. Four-point bending tests were also performed to investigate the flexural properties of the paulownia wood core sandwich panels. The experimental results showed that the failure mode of the structures was upper facesheet compressive yielding. The structures have good integrity against transverse load, there was a large plateau region after the initial failure and can prevent the structures from catastrophic failure. The finite element (FE) analysis showed a good agreement with the experimental results in predicting the load-displacement curve. The developed composite sandwich matting has been successfully used in military engineering, emergency rescue and large infrastructure construction owing to its excellent mechanical properties.
An innovative pultruded fiber reinforced polymer (FRP)–wood composite (PFWC) column with a lightweight southern pine wood core confined by outer FRP sheets was manufactured using an improved pultrusion process. Axial compression tests with both ends pinned as boundary conditions were employed to investigate the mechanical performance of such PFWC columns under concentric load. Through experimental investigations, the effects of the slenderness ratio on the failure modes and the axial load bearing capacities of the PFWC columns were evaluated. The failure modes showed that the specimens with a slenderness ratio less than 43.2 failed through compressive failure at junctions on FRP sheets, while those with slenderness ratios larger than 57.6 showed global buckling. Strain responses on specimens with different slenderness ratios are consistent with the observed failure modes. Finite element analysis was carried out to validate the experimental results, and satisfactory agreement was found between the failure modes and load–displacement curves. An empirical equation was developed with a new factor taking 0.65 into account to predict the load bearing capacities of the PFWC columns, and good agreement was found.
19 August 2010 in Journal of Wuhan University of Technology-Mater. Sci. Ed.