Mohd Nur Ashraf Mohd Yusoff

Mr. Mohd Nur Ashraf Mohd Yusoff


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 October 2015 in RSC Advances
Verified
Journal Article
Closed access
PDF file
MYMohd Nur Ashraf Mohd Yusoff
Mohd Nur Ashraf Mohd Yusoff
Nurin Wahidah Mohd ZulkifliNurin Wahidah Mohd Zulkifli
Nurin Wahidah Mohd Zulkifli
MBMd Masum Billah
Md Masum Billah
HMH. H. Masjuki
H. H. Masjuki
Fossil fuels depletion is a globally main issue because it is the primary transportation fuel. Furthermore, environmental issues including global warming and climate changes are problems that need to be dealt with immediately. Therefore, biofuels (bio-based fuels), i.e. bio-alcohols (bioethanol and biobutanol) which are produced from natural materials have emerged as promising transportation fuels because of their sustainability and environmental benefits which can reduce the dependency on crude oil reserves. Today, bioethanol is widely used as an option for transportation fuel or additives to gasoline in spark ignition (SI) engine due to its attractive properties of high octane number and reduced exhaust emissions. The next promising and competitive biofuel is biobutanol which has superior properties to be used in SI engine without engine modification. The aim of the present review is to highlight on the feasibility of the bioethanol and biobutanol as alternative transportation fuels in SI engine. The first section of this paper is an overview on bioethanol and biobutanol as gasoline alternatives. In the next section, comparative physicochemical properties of gasoline, bioethanol and biobutanol and their potential sources of production are presented. The effect of bioethanol and biobutanol with gasoline blends on engine performances, combustion analysis, exhaust emissions, engine durability and their effect on lubricating oil are discussed in the next section. The review study acknowledges that the bioethanol and biobutanol are capable of improving engine performances, combustion and also reducing exhaust emissions. However, the addition of alcohols in fuel blends leads to negative impacts on the engine durability and lubricating oil properties.

1 December 2017 in Transportation Research Part D: Transport and Environment
Verified
Journal Article
Closed access
MYMohd Nur Ashraf Mohd Yusoff
Mohd Nur Ashraf Mohd Yusoff
NZN.W.M. Zulkifli
N.W.M. Zulkifli
HMH.H. Masjuki
H.H. Masjuki
MHM.H. Harith
M.H. Harith
ASA.Z. Syahir
A.Z. Syahir
LKL.S. Khuong
L.S. Khuong

24 April 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
HHHarith Hasnul
Harith Hasnul
Nurin Wahidah Mohd ZulkifliNurin Wahidah Mohd Zulkifli
Nurin Wahidah Mohd Zulkifli
MHMasjuki Hassan
Masjuki Hassan
SZSyahir Amzar Zulkifli
Syahir Amzar Zulkifli
MYMohd Nur Ashraf Mohd Yusoff
Mohd Nur Ashraf Mohd Yusoff
MZMuhammad Zulfattah Zakaria
Muhammad Zulfattah Zakaria
The constant utilization of petroleum-based products has prompted concerns about the environment, hence a replacement for these products must be explored. Biolubricants are a suitable replacement for petroleum-based lubricants as they provide better lubricity. Biolubricant performance can be improved by the addition of graphene. However, there are reports that graphene is unable to form a stable suspension for a long period. This study used a graphene-ionic liquid additive combination to stabilize the dispersion in a biolubricant. Graphene and ionic liquid were dispersed into the biolubricant via a magnetic stirrer. The samples were tested using a high frequency reciprocating rig. The cast iron sample was then further observed using various techniques to determine the lubricating mechanism of the lubricant. Different dispersion stability of graphene was observed for different biolubricants, which can be improved with ionic liquids. All ionic liquid samples maintained an absorbance value of three for one month. The utilization of ionic liquid was also able to decrease the frictional performance by 33%. Further study showed that by using the ionic liquid alone, the frictional could only reduce the friction coefficient by 13% and graphene could only reduce the friction by 7%. A smooth worn surface scar can be seen on the graphene-IL sample compared to the prominent corrosive spot on the IL samples and abrasive scars on graphene samples. This indicates synergistic behavior between the two additives. It was found that the ionic liquid does not only improve the dispersion stability, but also plays a role in forming the tribolayer.

26 February 2020 in Journal of Tribology
Verified
Journal Article
Closed access
PDF file
ASA. Z. Syahir
A. Z. Syahir
HHHarith Hasnul
Harith Hasnul
Nurin Wahidah Mohd ZulkifliNurin Wahidah Mohd Zulkifli
Nurin Wahidah Mohd Zulkifli
HMH. H. Masjuki
H. H. Masjuki
MD ABUL KALAMMD ABUL KALAM
MD ABUL KALAM
MTMuhammad Ibrahim Salahuddin Tengku
Muhammad Ibrahim Salahuddin Tengku
This study reports the tribological characteristics of trimethylolpropane trioleate (TMPTO) additivated with antifriction and antiwear additives, which are ionic liquid (IL), glycerol monooleate (GMO), and molybdenum dithiocarbamate (MoDTC). In addition, to obtain the ideal composition that results in the minimal coefficient of friction (COF), optimization tool was employed using response surface methodology (RSM) technique with the Box–Behnken design. The IL used in this study was a phosphorus-type IL, namely trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl) phosphinate, [P14,6,6,6][TMPP]. The resulting COF and worn surface morphology were investigated using high-frequency reciprocating rig (HFRR) tribotester and scanning electron microscope with energy-dispersive X-ray spectroscopy (SEM-EDX), respectively. From the experimental results, a second-order polynomial mathematical model was constructed and able to statistically predict the resulting COF. The optimized values that resulted in the lowest average COF of 0.0458 were as follows: 0.93 wt% IL, 1.49 wt% GMO, and 0.52 wt% MoDTC. The addition of IL into neat base oil managed to reduce the COF, while the combination of IL, GMO, and MoDTC at optimum concentration further reduced the average COF and wear as observed through SEM micrographs when compared with those of additive-free TMPTO, suggesting that GMO and MoDTC were compatible to be used with IL.