In this paper, new half-bridge and full-bridge topologies for a switched-boost inverter are proposed. These topologies have a high boost factor in comparison with conventional types. In addition, the proposed topologies have continuous input current and can generate zero-voltage level in output. In this paper, the operation of the proposed inverters in different operating modes is analyzed. Then, the values of inductors and capacitors are designed. Moreover, the used switching pattern and its logical diagram are introduced. A comprehensive comparison between the proposed and conventional topologies in terms of the boost factor, the number of elements, and the efficiency shows the good features of the proposed inverters. Finally, to verify correct operation of the proposed topologies and derived equations, simulation and experimental results are presented.
This study reviews and categorises different structures of switched Z‐source networks. Generally, these structures are divided into two groups of basic switched Z‐source networks and switched Z‐source networks with the capability of high boost. Each of these groups is divided into several subgroups and different structures are introduced. For each subsection, the general power circuit is proposed and the extraction method from general power circuit for each structure is obtained. This study also provides a complete analysis of structures by using a conventional control method with two shoot‐through and non‐shoot‐through modes. Small signal analysis for structures with a basic switched Z‐source network is conducted and the general signal flow graph is extracted. A comprehensive analysis of all structures with a switched Z‐source network is done and the tree diagram for the division of these structures is provided. Finally, different industrial applications and outlook of Z‐source networks are introduced.
In this study, an improved topology of half‐bridge switched boost inverter with low voltage stress on capacitors is proposed. The proposed half‐bridge quasi‐switched boost inverter, in comparison with the half‐bridge Z‐source inverter with two Z‐networks, has less passive components. Moreover, the proposed topology generates high voltage gain comparing with the conventional topologies and has stable operation. Producing zero voltage level at the output is the other advantage of the proposed inverter, in comparison with the conventional half‐bridge inverter. The small‐signal model and steady‐state analysis of the proposed inverter in different operating modes are given. Moreover, signal flow graph using small‐signal analysis and design considerations are derived. In addition, switching pattern for the proposed inverter is presented and power losses are calculated. A comprehensive comparison is done between the proposed topology and conventional inverters from different points of view such as number of components, volume, inrush current, tolerance of shoot‐through and so on. Finally, the simulation and experimental results are given to demonstrate dynamic response, effect of undesirable shoot‐through and the accuracy of the given theories.
In this study, a new topology for multiple series Z‐source inverter is proposed. The proposed topology only with one dc power source can generate output voltage higher than the conventional converter. This inverter has low voltage stress on capacitors and common ground between the input source and inverter. Also, the proposed topology with soft‐start strategy has inherent ability to reduce inrush‐current at start‐up. First, different operating modes of the proposed inverter are investigated. Then, the voltage and current of elements and also voltage gain of the inverter are extracted. The comparison results of the proposed and conventional topologies show the advantages of the proposed topology. To verify the correctness operation of the proposed topology, the simulation and experimental results are used.
This paper proposes a switched Z‐source inverter with high voltage gain and low current stress on elements. Also, a new switching method corresponding to the proposed topology is introduced. This method is based on the usual Maximum Constant Boost (MCB) method. Hence, it has the advantages of the MCB method, such as low voltage stress on the inverter switches and high voltage gain. Also, eliminating part of the inverter's switching in this modulation method improves the inverter's efficiency. In addition to the Shoot‐Through (ST) duty cycle, another variable (N) affects the inverter's boost factor in this switching method. The proposed inverter's dynamic analysis shows that introducing N in the modulation method improved the dynamic characteristic of the inverter. Also, this variable as a control input can stabilize the dc side of the inverter in the closed‐loop control of the inverter. For the proposed topology, steady‐state analysis, dynamic analysis, elements design and efficiency calculation are performed. Also, the proposed topology is compared with the conventional topologies regarding boost factor, the number of elements, current stress on elements and efficiency to show its superiority. Finally, the experimental results are presented to verify theoretical discussions.
In this study, a new switching pattern for switched Z‐source inverters (ZSIs) is proposed. By this technique, the switched ZSIs can generate general boost factor with different functions. The proposed modulation technique is a general technique and can be applied for all types of switched boost inverters, switched ZSIs and active ZSIs. The mentioned inverters do not use additional passive elements in comparison with the conventional ZSI. Moreover, variable boost factor with ability of changing both switching factor and shoot‐through duty cycle makes these inverters more valuable than transformer‐based ZSI. Applying the proposed technique leads to make different non‐shoot‐through (nST) operating modes which are named adjacent‐nST and non‐adjacent‐nST operating modes. The extraction of equations and steady‐state analyses for a type of switched ZSIs in different operating modes are presented. In addition, the design considerations and calculation of critical inductance in the new switching pattern are given. The logical diagram of the switching pattern is introduced and comparison between different types of switched ZSIs with the proposed switching pattern from different aspects is done. Finally, the simulation and experimental results are given to show the good agreement between the theoretical and measured results.