3D printing, is a newly adopted technique in the construction sector with the aim to improve the economics and alleviate environmental impacts. This study assesses the eco-efficiency of 3D printing compared to conventional construction methods in large-scale structural fabrication. A single-storey 3D-printed house was selected in the United Arab Emirates to conduct the comparative assessment against traditional concrete construction. The life cycle assessment (LCA) framework is utilized to quantify the environmental loads of raw materials extraction and manufacturing, as well as energy consumption during construction and operation phases. The economics of the selected structural systems were investigated through life cycle costing analysis (LCCA), that included mainly the construction costs and energy savings. An eco-efficiency analysis was employed to aggregate the results of the LCA and LCCA into a single framework to aid in decision making by selecting the optimum and most eco-efficient alternative. The findings revealed that houses built using additive manufacturing and 3D printed materials were more environmentally favourable. The conventional construction method had higher impacts when compared to the 3D printing method with global warming potential of 1154.20 and 608.55 kg CO2 eq, non-carcinogenic toxicity 675.10 and 11.9 kg 1,4-DCB, and water consumption 233.35 and 183.95 m3, respectively. The 3D printed house was also found to be an economically viable option, with 78% reduction in the overall capital costs when compared to conventional construction methods. The combined environmental and economic results revealed that the overall process of the 3D-printed house had higher eco efficiency compared to concrete-based construction. The main results of the sensitivity analysis revealed that up to 90% of the environmental impacts in 3D printing mortars can be mitigated with decreasing cement ratios.
Smart waste collection strategies have been developed to replace conventional fixed routes with dynamic systems that respond to the actual fill-level of waste bins. The variation in waste generation patterns, which is the main driver for the profit of smart systems, is exacerbated in the United Arab Emirates (UAE) due to a high expatriate ratio. This leads to significant changes in waste generation during breaks and seasonal occasions. The present study aimed to evaluate a geographic information system (GIS)-based smart collection system (SCS) compared to conventional practices in terms of time, pollution, and cost. Different scenarios were tested on a local residential district based on variable bin filling rates. The input data were obtained from a field survey on different types of households. A knowledge-based decision-making algorithm was developed to select the bins that require collection based on historical data. The simulation included a regular SCS scenario based on actual filling rates, as well as sub-scenarios to study the impact of reducing the waste generation rates. An operation cost reduction of 19% was achieved with SCS compared to the conventional scenario. Moreover, SCS outperformed the conventional system by lowering carbon-dioxide emissions by between 5 and 22% for various scenarios. The operation costs were non-linearly reduced with the incremental drops in waste generation. Furthermore, the smart system was validated using actual waste generation data of the study area, and it lowered collection trip times by 18 to 42% compared to the conventional service. The present study proposes an integrated SCS architecture, and explores critical considerations of smart systems.
10 August 2019 in Reviews in Environmental Science and Bio/Technology