Due to the growing world population, the challenge for the agriculture industry is to produce the right amount of food. This is not possible without the use of fertilizers. Unfortunately, apart from having a positive effect on the yield parameters, they can also adversely affect the natural environment. The use of fertilizers in excess or in a poorly digestible form causes the migration of fertilizer components beyond the reach of the plant root system. In this way, nutrients enter the groundwater, surface water and the atmosphere, contaminating them. The consequence of such actions is further climate warming and the deterioration of water status and air quality. Suspension fertilizers are an interesting proposition that meets the requirements of modern agriculture. They combine the advantages of liquid and solid fertilizers. The liquid form ensures better digestibility of the nutrients, especially in periods of drought, and the concentration of the ingredients is comparable to that of solid fertilizers. At the same time, production costs are lower, which is related to the simplification of the technological process and the possibility of using cheaper raw materials. A valuable advantage of fertilizer suspension is the possibility of using hydrated waste substances in their production.

Phosphorus raw materials are non-renewable, and their resources are shrinking faster and faster as a result of increased fertilizer production. This is due to the increasing population and the need to produce more food. Phosphorus, on the other hand, is one of the main nutrients of plants, without which it is impossible to conduct intensive agricultural production. There are no economically significant phosphate resources in Europe, so they must be imported. That is why it is so important to reduce losses and recover this element from waste streams, which was reflected in the new EU Regulation 2019/1009. A prospective option is to use waste phosphates from the production of polyether polyols. Previous studies show that they contain about 20% phosphorus. Due to their high water content, the most advantageous form of their application is the production of fertilizers in the form of a suspension. The aim of the study is to assess the possibility of using waste phosphates from the production of polyols as raw materials for the production of suspension fertilizers.

Schisandra chinensis Turcz. (Baill.) is a dioecious vine belonging to the Schisandraceae family. Its berries show beneficial activities, including cardioprotective, antioxidant, and anti-inflammatory. We examined the chemical content of S. chinensis berry extract and its antiplatelet potential in vitro. The antiplatelet activity assays included measurements of thrombus formation in full blood (with Total Thrombus-formation Analysis System) and platelet activation and adhesion. We also assessed the extract’s effect on coagulation times in human plasma and its cytotoxicity toward blood platelets based on extracellular lactate dehydrogenase activity. The most important constituents of the extract were dibenzocyclooctadiene lignans; schisandrin was the dominant compound. S. chinensis berry extract at the concentration of 50 μg/mL inhibited thrombus formation by approximately 15%. The adhesion of unstimulated and thrombin-activated blood platelets to collagen was inhibited by all used concentrations of the extract (0.5–50 μg/mL), while the adhesion of adenosine diphosphate (ADP)-activated platelets to fibrinogen was inhibited only by the concentrations of 10 and 50 μg/mL. The extract also inhibited the exposition of the active form of GPIIb/IIIa on the surface of platelets stimulated with 10 μM ADP (at 0.5–50 μg/mL) and 20 μM ADP (at 50 μg/mL). The exposition of P-selectin was inhibited only by the extract at the concentrations of 5–50 μg/mL in platelets stimulated with 10 μg/mL collagen. Moreover, the extract was not cytotoxic toward blood platelets. This indicates that S. chinensis berries hold promise as new antiplatelet agents, but more studies are needed to determine their mechanisms of action and in vivo efficiency.

The limited resources of phosphorus raw materials, which are located outside of Europe, make it necessary to obtain phosphorus from the waste stream. This is reflected in the new EU Regulation 2019/1009, which concerns making fertilizing products available on the market. Its main goal is to harmonize the standards for fertilizers obtained from organic or secondary raw materials in the EU and to create new opportunities for their production and sale. The fertilizer sector uses almost 90% of the phosphorus raw material, for which there is no substitute, and the demand for fertilizers is constantly growing, stimulated by the growing number of people. A substitute for expensive imported raw materials can be waste sodium–potassium phosphate from the production of polyols. This study analyzes the composition and form of waste from PCC Rokita S. A. from Brzeg Dolny in Poland, in terms of the possibility of using it in the production of fertilizers according to the new EU regulations. Research shows that it contains nearly 19% phosphorus, as well as potassium and sodium. Low-level impurities and low organic matter content classify it as a raw material for the production of inorganic fertilizers. Due to the high water content, the most advantageous form of its use is the production of fertilizers in the form of a suspension. A certain difficulty in the production of this type of fertilizer may be the layers of crystals of different sizes precipitating in the waste.

The need to import phosphorus raw materials for fertilizer purposes in Europe as well as the need to manage increasing amounts of waste contributed to the search for alternative sources of phosphorus. One of these is waste sodium–potassium phosphate from the production of polyols. Additionally, a current problem is providing an adequate amount of food, where fertilizers play the main role. Due to the increase in meat consumption, the attractiveness of growing corn for feed is increasing due to its high yield potential and rich composition. The article presents the impact of suspension fertilizers based on waste from the production of polyols on the yield of corn intended for green fodder. In a 3-year field study, the effects of a waste phosphorus source were compared with a commercial granulated phosphorus fertilizer—fosdar. In addition, the suspension fertilizers were assessed according to their composition by testing fertilizers containing only basic nutrients (NPK) and ones enriched with secondary ingredients (S and Mg) and microelements (Zn, Mn and B). The research confirmed the effectiveness of the tested suspension fertilizers. Although the yield obtained was lower than in the case of fosdar fertilization, it still remained at a high level of over 70 t∙ha⁻¹ of fresh yield.

The aim of the study was to assess the impact of fertilizer type (urea, compound fertilizer), biodegradable coating type (linseed oil or hemp oil based) and nitrogen dose (135 and 180 kg N·ha⁻¹) on the yield of corn intended for silage. A three-year field experiment was conducted using a randomized block design with three replicates. The test plant was corn intended for silage. The field experiment was conducted in a factorial design comprising three experimental factors: fertilizer type (two levels), coating type (two levels), and fertilizer dose (two levels). Controlled-release fertilizers (CRF) based on biodegradable coatings are an emerging solution in sustainable nitrogen management, yet their field-scale performance remains insufficiently validated. This study investigated how biodegradable coatings based on linseed and hemp oils affect nutrient release dynamics and maize yield under three-year field conditions. The study represents the first field validation phase translating laboratory coating characteristics into agricultural performance metrics. Statistical analysis (ANOVA, Tukey’s test) showed that in the first year of the study, the greatest impact on plant height and corn yield was observed in the case of type of fertilizer used (η²_p up to 17.83%), type of coating (η²_p up to 63.15%) and their interaction (η²_p up to 11.92%). The symbol η²_p (partial eta squared) represents a measure of effect size in analysis of variance (ANOVA). The largest plant size (average 307–310 cm) and the highest yield (107.33 t·ha⁻¹) were obtained in the case of yields in which compound fertilizer or urea with coatings were used in relation to the series in which fertilizers without coatings were applied (differences up to 11 t·ha⁻¹). Statistical analysis using repeated measures ANOVA confirmed a significant time effect, with fertilizer effectiveness declining in subsequent years of the experiment (p < 0.05). In the experiment, no effect of the tested factors on the number of corn cobs was found (η²_p < 2.27%). The highest fresh matter yield for silage production was obtained with coated NPK compound fertilizer (98.80 t·ha⁻¹), representing a 48% increase compared to the unfertilized control (66.90 t·ha⁻¹). The results of the study indicate that the use of coated compound fertilizers—NPK has the most beneficial effect on yield and biometric parameters of plants in the first growing season after their soil application. The enhanced nutrient release from biodegradable coatings provided greatest benefits in the first growing season, with diminishing effects in subsequent years due to coating degradation and residual soil nutrient accumulation.