This article presents a proposal to describe the pressure changes in the combustion chamber of an engine as a function of the angle of rotation of the crankshaft, taking into account changes in rotational speed resulting from acceleration. The aim of the proposed model is to determine variable piston forces in simulation studies of torsional vibrations of a crankshaft with a vibration damper during the acceleration process. Its essence is the use of a Fourier series as a continuous function to describe pressure changes in one cycle of work. Such a solution is required due to the variable integration step during the simulation. It was proposed to determine the series coefficients on the basis of a Fourier transform of the averaged waveform of a discreet open indicator diagram, calculated for the registration of successive cycles. Recording of the indicative pressure waveforms and shaft angle sensor signals was carried out during tests on the chassis dynamometer. An analysis of the influence of the adopted number of series coefficients on the representation of signal energy was carried out. The model can also take into account the phenomenon of work cycle uniqueness by introducing random changes in the coefficients with magnitudes set on the basis of determined standard deviations for each coefficient of the series. An indispensable supplement to the model is a description of changes in the engine rotational speed, used as a control signal for the PID controller in the simulation of the load performed by the dynamometer. The accuracy of determining the instantaneous rotational speed was analyzed on the basis of signals from the crankshaft position angle sensor and the piston top dead center (TDC) sensor. Limitations resulting from the parameters of digital signal recording were defined.
This article presents a condensed outline of how approaches to solving technical diagnostics tasks have changed over the last 50 years. It reviews different approaches to the modelling of wear and tear phenomena that are the subject of diagnosis, and draws attention to groundbreaking papers which are still of topical interest. Particular emphasis is placed on the development of vibroacoustic diagnostics methods, an area in which Polish scientists were among the world’s avant garde. It is also shown how methodologies have changed with the progress of digital signal analysis. The example presented in the second part of the article demonstrates that the well-known and technically important task of diagnosing a gear set can now be solved without looking for a classic state→symptom relationship through an accurate dynamic description of the machine and comparing it with the results of an experiment, but instead by comparing observations at different points in the n-dimensional space with an abstract pattern generated by a sequence of logical transformations. This formulation of the task opens up avenues for AI methods. Attention is paid to the fact that maritime shipping is one of the main fields of application for modern diagnostic methods, and it is shown that the increase in the accuracy of vibroacoustic diagnostics techniques and the correctness of the diagnosis allows for the use of this methodology in marine applications.