Vibration can have a significant impact on long-term health, driver comfort, and vehicle performance. With a focus on steering wheel vibrations, this study examines both general and local vibrations that affect the driver. Under real-world conditions, a series of controlled test drives were conducted, with high-precision accelerometers mounted on the driver’s seat and steering wheel recording vibration data. The measurements were conducted in accordance with ISO 5349 and ISO 2631-1, which guaranteed a consistent assessment of vibration exposure. The results suggest that the daily vibration exposure for general vibrations at the driver’s seat is significantly lower than the legal limit, as evidenced by the presence of significant frequencies in the vertical (Z) axis. Nevertheless, steering wheel vibrations may cause pain due to their proximity to the resonance frequencies of the human hand–arm system, which have frequency maxima at approximately 35 Hz and harmonic 70 Hz. Additionally, the vibration intensity was elevated at vehicle velocities between 70 and 80 km/h, suggesting the potential presence of a resonance effect within the suspension or powertrain. The results emphasize the significance of advanced vibration reduction strategies in enhancing driver comfort and safety, including the implementation of a well-designed steering system and enhanced seat absorption. This research offers valuable insights for automotive engineers and ergonomics specialists who are interested in minimizing long-term health risks and vibration-induced fatigue. The aim of this study is to indicate the areas of the drive system fault that have a direct impact on the vibrations of the body structure. The article presents an analysis of the recorded vibration results based on which of the areas of change in the comfort of using the vehicle were selected.
This article presents a proposal to describe the pressure changes in the combustion chamber of an engine as a function of the angle of rotation of the crankshaft, taking into account changes in rotational speed resulting from acceleration. The aim of the proposed model is to determine variable piston forces in simulation studies of torsional vibrations of a crankshaft with a vibration damper during the acceleration process. Its essence is the use of a Fourier series as a continuous function to describe pressure changes in one cycle of work. Such a solution is required due to the variable integration step during the simulation. It was proposed to determine the series coefficients on the basis of a Fourier transform of the averaged waveform of a discreet open indicator diagram, calculated for the registration of successive cycles. Recording of the indicative pressure waveforms and shaft angle sensor signals was carried out during tests on the chassis dynamometer. An analysis of the influence of the adopted number of series coefficients on the representation of signal energy was carried out. The model can also take into account the phenomenon of work cycle uniqueness by introducing random changes in the coefficients with magnitudes set on the basis of determined standard deviations for each coefficient of the series. An indispensable supplement to the model is a description of changes in the engine rotational speed, used as a control signal for the PID controller in the simulation of the load performed by the dynamometer. The accuracy of determining the instantaneous rotational speed was analyzed on the basis of signals from the crankshaft position angle sensor and the piston top dead center (TDC) sensor. Limitations resulting from the parameters of digital signal recording were defined.
A sound barrier is a structure or device that reduces the level of airborne sound. The basic tasks of such a construction are to provide acoustic insulation and sound absorption. There are many materials available on the market ready to use as such structures used for soundproofing passenger...