CO₂ methanation is often performed on Ni/Al₂O₃ catalysts, which can suffer from mass transport limitations and, therefore, decreased efficiency. Here we show the application of a hierarchically porous Ni/Al₂O₃ catalyst for methanation of CO₂. The material has a well-defined and connected meso- and macropore structure with a total porosity of 78%. The pore structure was thoroughly studied with conventional methods, i.e., N₂ sorption, Hg porosimetry, and He pycnometry, and advanced imaging techniques, i.e., electron tomography and ptychographic X-ray computed tomography. Tomography can quantify the pore system in a manner that is not possible using conventional porosimetry. Macrokinetic simulations were performed based on the measures obtained by porosity analysis. These show the potential benefit of enhanced mass-transfer properties of the hierarchical pore system compared to a pure mesoporous catalyst at industrially relevant conditions. Besides the investigation of the pore system, the catalyst was studied by Rietveld refinement, diffuse reflectance ultraviolet-visible (DRUV/vis) spectroscopy, and H₂-temperature programmed reduction (TPR), showing a high reduction temperature required for activation due to structural incorporation of Ni into the transition alumina. The reduced hierarchically porous Ni/Al₂O₃ catalyst is highly active in CO₂ methanation, showing comparable conversion and selectivity for CH₄ to an industrial reference catalyst.

X-ray ptychography has revolutionized nanoscale phase contrast imaging at large-scale synchrotron sources in recent years. We present here the first successful demonstration of the technique in a small-scale laboratory setting. An experiment was conducted with a liquid metal-jet x-ray source and a single photon-counting detector with a high spectral resolution. The experiment used a spot size of $5\mu \mathrm{m}$ to produce a ptychographic phase image of a Siemens star test pattern with a submicron spatial resolution. The result and methodology presented show how high-resolution phase contrast imaging can now be performed at small-scale laboratory sources worldwide.

Studies of the structural and functional role of chromosomes in cytogenetics have spanned more than 10 decades. In this work, we take advantage of the coherent X-rays available at the latest synchrotron sources to extract the individual masses of all 46 chromosomes of metaphase human B and T cells using hard X-ray ptychography. We have produced ‘X-ray karyotypes’ of both heavy metal–stained and unstained spreads to determine the gain or loss of genetic material upon low-level X-ray irradiation doses due to radiation damage. The experiments were performed at the I-13 beamline, Diamond Light Source, Didcot, UK, using the phase-sensitive X-ray ptychography method.

Diffractive optical elements such as periodic gratings are fundamental devices in X‐ray imaging – a technique that medical, material science, and security scans rely upon. Fabrication of such structures with high aspect ratios at the nanoscale creates opportunities to further advance such applications, especially in terms of relaxing X‐ray source coherence requirements. This is because typical grating‐based X‐ray phase imaging techniques (e.g., Talbot self‐imaging) require a coherence length of at least one grating period and ideally longer. In this paper, the fabrication challenges in achieving high‐aspect ratio nanogratings filled with gold are addressed by a combination of laser interference and nanoimprint lithography, physical vapor deposition, metal assisted chemical etching (MACE), and electroplating. This relatively simple and cost‐efficient approach is unlocked by an innovative post‐MACE drying step with hexamethyldisilazane, which effectively minimizes the stiction of the nanostructures. The theoretical limits of the approach are discussed and, experimentally, X‐ray nanogratings with aspect ratios >40 are demonstrated. Finally, their excellent diffractive abilities are shown when exposed to a hard (12.2 keV) monochromatic X‐ray beam at a synchrotron facility, and thus potential applicability in phase‐based X‐ray imaging.

X-ray ptychography, a scanning coherent diffraction imaging technique, is one of the most used techniques at synchrotron facilities for high resolution imaging, with applications spanning from life science to nano-electronics. In the recent years there has been a great effort to make the technique faster to enable high throughput nanoscale imaging. Here we apply a fast ptychography scanning method to image in 3D $$10^6\upmu \mathrm{{m}}^3$$10 6 μ m 3 of brain-like phantom at 3 kHz, in a 7 h acquisition with a resolution of 270 nm. We then present the latest advances in fast ptychography by showing 2D images acquired at 110 kHz by combining the fast-acquisition scheme with a high-acquisition rate prototype detector from DECTRIS Ltd. We finally review the experimental outcome and discuss the prospective use of fast ptychography schemes for the investigation of mm $$^{3}$$3 size samples of brain-like phantom, by extrapolating the current results to the high coherent flux scenario of diffraction limited storage rings.

Laser-plasma accelerators are compact linear accelerators based on the interaction of high-power lasers with plasma to form accelerating structures up to 1000 times smaller than standard radiofrequency cavities, and they come with an embedded X-ray source, namely betatron source, with unique properties: small source size and femtosecond pulse duration. A still unexplored possibility to exploit the betatron source comes from combining it with imaging methods able to encode multiple information like transmission and phase into a single-shot acquisition approach. In this work, we combine edge illumination-beam tracking (EI-BT) with a betatron X-ray source and present the demonstration of multimodal imaging (transmission, refraction, and scattering) with a compact light source down to the femtosecond timescale. The advantage of EI-BT is that it allows multimodal X-ray imaging technique, granting access to transmission, refraction and scattering signals from standard low-coherence laboratory X-ray sources in a single shot.