Convective heat transfer and entropy generation in a 3D closed cavity, equipped with adiabatic-driven baffle and filled with CNT (carbon nanotube)-water nanofluid, are numerically investigated for a range of Rayleigh numbers from 10³ to 10⁵. This research is conducted for three configurations; fixed baffle (V = 0), rotating baffle clockwise (V+) and rotating baffle counterclockwise (V−) and a range of CNT concentrations from 0 to 15%. Governing equations are formulated using potential vector vorticity formulation in its three-dimensional form, then solved by the finite volume method. The effects of motion direction of the inserted driven baffle and CNT concentration on heat transfer and entropy generation are studied. It was observed that for low Rayleigh numbers, the motion of the driven baffle enhances heat transfer regardless of its direction and the CNT concentration effect is negligible. However, with an increasing Rayleigh number, adding driven baffle increases the heat transfer only when it moves in the direction of the decreasing temperature gradient; elsewhere, convective heat transfer cannot be enhanced due to flow blockage at the corners of the baffle.

Phase-change materials (PCMs) are becoming more widely acknowledged as essential elements in thermal energy storage, greatly aiding the pursuit of lower building energy consumption and the achievement of net-zero energy goals. PCMs are frequently constrained by their subpar heat conductivity, despite their expanding importance. This in-depth research includes a thorough categorization and close examination of PCM features. The most current developments in nanoencapsulated PCM (NEPCMs) techniques are also highlighted, along with recent developments in thermal energy storage technology. The assessment also emphasizes how diligently researchers have worked to advance the subject of PCMs, including the creation of devices with improved thermal performance using nano-enhanced PCMs (NEnPCMs). This review intends to highlight the progress made in improving the efficiency and efficacy of PCMs by providing a critical overview of these improvements. The paper concludes by discussing current challenges and proposing future directions for the continued advancement of PCMs and their diverse applications.

A three dimensional computational solution has been obtained to investigate the natural convection and entropy generation of nanofluid-filled open cavities with an adiabatic diamond shaped obstacle. In the model, the finite volume technique was used to solve the governing equations. Based on the configuration, the cavity is heated from the left vertical wall and the diamond shape was chosen as adiabatic. Effects of nanoparticle volume fraction, Rayleigh number (10³ ≤ Ra ≤ 10⁶) and width of diamond shape were studied as governing parameters. It was found that the geometry of the partition is a control parameter for heat and fluid flow inside the open enclosure.