Currently, the predominant process for soy protein concentrate (SPC) production is aqueous ethanol washing of hexane-extracted soy meal. However, the use of hexane is less desired, which explains the increased interest in cold pressing for oil removal. In this study, cold-pressed soy meal was used as the starting material, and a range of water/ethanol ratios was applied for the washing process to produce SPCs. Washing enriched the protein content for the SPCs, regardless of the solvent used. However, we conclude that washing with water (0% ethanol) or solvents with a high water/ethanol ratio (60% and above) can be more advantageous. Washing with a high water/ethanol ratio resulted in the highest yield, and SPCs with the highest protein solubility and water holding capacity. The water-only washed SPC showed the highest viscosity, and formed gels with the highest gel strength and hardness among all the SPCs at a similar protein concentration. The variations in the functionality among the SPCs were attributed to protein changes, although the effects of non-protein constituents such as sugar and oil might also be important. Overall, the aqueous ethanol washing process combined with cold-pressed soy meal created SPCs comparable to commercial SPC in terms of composition, but with varied functionalities that are relevant for novel soy-food developments.

Consumers who are environmentally and health conscious are increasingly looking for plant-based alternatives to replace animal-based products in their daily diets. Among these alternatives, there is a growing demand for meat analogues that closely resemble the taste and texture of meat. As a result, significant efforts have been dedicated to developing meat analogues with a desirable meat-like structure. Currently, soy protein and wheat gluten are the main ingredients used for producing these meat analogues due to their availability and unique functionalities. This study observed that high moisture extrusion at moisture levels of 50–80% has become a common approach for creating fibrous structures, with soy protein and wheat gluten being considered incompatible proteins. After the structuring process, they form two-phase filled gels, with wheat gluten acting as the continuous phase and soy protein serving as a filler material. Moreover, the formation of soy protein and wheat gluten networks relies on a combination of covalent and non-covalent interaction bonds, including hydrogen bonds that stabilize the protein networks, hydrophobic interactions governing protein chain associations during thermo-mechanical processes, and disulfide bonds that potentially contribute to fibrous structure formation. This review provides case studies and examples that demonstrate how specific processing conditions can improve the overall structure, aiming to serve as a valuable reference for further research and the advancement of fibrous structures.

Mung beans contain abundant flavonoids like vitexin and isovitexin, which contribute to their strong bioactivities, such as antioxidant effects, so efforts should focus on extracting bioactive flavonoids as well as aligning with the goal of green extraction for specific applications. Deep eutectic solvent coupled with ultrasound-assisted extraction (DES-UAE) was applied to extract flavonoids from mung beans, and eight different DESs were compared on the extraction yield. In addition, the traditional extraction method with 30% ethanol was performed as the reference. The results showed that ethylene glycol-glycolic acid achieved the highest yield among all the DESs, 1.6 times that of the reference values. Furthermore, the DES-UAE parameters were optimized as a 60 mL/g liquid–solid ratio, 30% water content in DES, 200 W ultrasonic power, 67 °C ultrasonic temperature, and 10 min extraction time, leading to the DES extract with the maximum extraction yield of 2339.45 ± 42.98 μg/g, and the significantly stronger DPPH and ABTS radical scavenging ability than the traditional extract. Therefore, employing DES and ultrasonic extraction together offers a green method for extracting flavonoids from mung beans, advancing the development and utilization of plant-derived effective components in a sustainable manner.

As one of the popular tropical fruits, mango has a relatively short shelf life due to its perishability. Therefore, post-harvest losses are always a topic of concern. Currently, freezing is a common approach to extending mango shelf life. In relation, it is also critical to select a proper thawing process to maintain its original quality attributes. In this study, microwave thawing, and ultra-high-pressure thawing were investigated, and traditional thawing methods (air thawing and water thawing) were compared as references. The thawing time, quality attributes, and sensory scores of frozen mangoes were evaluated. Compared to traditional methods, innovative thawing methods can extensively shorten thawing time. These things considered, the thawing time was further decreased with the increase in microwave power. Additionally, microwave thawing enhanced the quality of mangoes in terms of less color change and drip loss and reduced loss of firmness and vitamin C content. Microwave thawing at 300 W is recommended as the best condition for thawing mangoes, with the highest sensory score. Current work provides more data and information for selecting suitable thawing methods and optimum conditions for frozen mango to minimize losses.

Biofortification is one of the most successful approaches to enhance the level of micronutrients in wheat. In the present study, wheats with zinc biofortification (foliar fertilization and breeding strategies) were milled into five components (whole flour, break flour, reduction flour, fine bran, and coarse bran) and their mineral content and nutritional components were evaluated. The results revealed that biofortification greatly increased the Zn concentration (by 30.58%–30.86%) and soluble Zn content (by 28.57%–42.86%) of whole flour after digestion. This improvement is mainly in break flour, reduction flour, and fine bran. Meanwhile, the contents of macronutrients including ash, lipids, and proteins and micronutrients containing iron, calcium, and vitamins (B₁, B₆, and B₉) increased after biofortification. In addition, there was a decline in the concentrations of vitamins B₂ and B₅. Although dietary fibers and starch are the major carbohydrates, total dietary fiber exhibited a declining trend in coarse bran, and starch exhibited a rising trend in break and reduction flour. There was a decrease in the molar ratio of phytates: zinc did not promote a significant improvement in zinc bioaccessibility. These results can be useful for generating wheat varieties rich in micronutrients as well as having better nutritional traits.