During the past dozen years, several mobile mapping systems based on the use of imaging and positioning sensors mounted on terrestrial (and aerial) vehicles have been developed. Recently, systems characterized by an increased portability have been proposed in order to enable mobile mapping in environments that are difficult to access for vehicles, in particular for indoor environments. In this work the performance of a low-cost mobile mapping system is compared with that of: (i) a state-of-the-art terrestrial laser scanning (TLS), considered as the control; (ii) a mobile mapping backpack system (Leica Pegasus), which can be considered as the state-of-the-art of commercial mobile mapping backpack systems. The aim of this paper is two-fold: first, assessing the reconstruction accuracy of the proposed low-cost mobile mapping system, based on photogrammetry and ultra-wide band (UWB) for relative positioning (and a GNSS receiver if georeferencing is needed), with respect to a TLS survey in an indoor environment, where the global navigation satellite system (GNSS) signal is not available; second, comparing such performance with that obtained with the Leica backpack. Both mobile mapping systems are designed to work without any control point, to enable an easy and quick survey (e.g., few minutes) and to be easily portable (relatively low weight and small size). The case study deals with the 3D reconstruction of a medieval bastion in Padua, Italy. Reconstruction using the Leica Pegasus backpack allowed obtaining a smaller absolute error with respect to the UWB-based photogrammetric system. In georeferenced coordinates, the root mean square (RMS) error was respectively 16.1 cm and 50.3 cm; relative error in local coordinates was more similar, respectively 8.2 cm and 6.1 cm. Given the much lower cost (approximately $6k), the proposed photogrammetric-based system can be an interesting alternative when decimetric reconstruction accuracy in georeferenced coordinates is sufficient.

Thanks to their flexibility and availability at reduced costs, Unmanned Aerial Vehicles (UAVs) have been recently used on a wide range of applications and conditions. Among these, they can play an important role in monitoring critical events (e.g., disaster monitoring) when the presence of humans close to the scene shall be avoided for safety reasons, in precision farming and surveying. Despite the very large number of possible applications, their usage is mainly limited by the availability of the Global Navigation Satellite System (GNSS) in the considered environment: indeed, GNSS is of fundamental importance in order to reduce positioning error derived by the drift of (low-cost) Micro-Electro-Mechanical Systems (MEMS) internal sensors. In order to make the usage of UAVs possible even in critical environments (when GNSS is not available or not reliable, e.g., close to mountains or in city centers, close to high buildings), this paper considers the use of a low cost Ultra Wide-Band (UWB) system as the positioning method. Furthermore, assuming the use of a calibrated camera, UWB positioning is exploited to achieve metric reconstruction on a local coordinate system. Once the georeferenced position of at least three points (e.g., positions of three UWB devices) is known, then georeferencing can be obtained, as well. The proposed approach is validated on a specific case study, the reconstruction of the façade of a university building. Average error on 90 check points distributed over the building façade, obtained by georeferencing by means of the georeferenced positions of four UWB devices at fixed positions, is 0.29 m. For comparison, the average error obtained by using four ground control points is 0.18 m.

This paper considers the problem of indoor navigation by means of low-cost mobile devices. The required accuracy, the low reliability of low-cost sensor measurements and the typical unavailability of the GPS signal make indoor navigation a challenging problem. In this paper, a particle filtering approach is presented in order to obtain good navigation performance in an indoor environment: the proposed method is based on the integration of information provided by the inertial navigation system measurements, the radio signal strength of a standard wireless network and of the geometrical information of the building. In order to make the system as simple as possible from the user’s point of view, sensors are assumed to be uncalibrated at the beginning of the navigation, and an auto-calibration procedure of the magnetic sensor is performed to improve the system performance: the proposed calibration procedure is performed during regular user’s motion (no specific work is required). The navigation accuracy achievable with the proposed method and the results of the auto-calibration procedure are evaluated by means of a set of tests carried out in a university building.

Developments in the field of artificial intelligence have made great strides in the field of automatic semantic segmentation, both in the 2D (image) and 3D spaces. Within the context of 3D recording technology it has also seen application in several areas, most notably in creating semantically rich point clouds which is usually performed manually. In this paper, we propose the introduction of deep learning-based semantic image segmentation into the photogrammetric 3D reconstruction and classification workflow. The main objective is to be able to introduce semantic classification at the beginning of the classical photogrammetric workflow in order to automatically create classified dense point clouds by the end of the said workflow. In this regard, automatic image masking depending on pre-determined classes were performed using a previously trained neural network. The image masks were then employed during dense image matching in order to constraint the process into the respective classes, thus automatically creating semantically classified point clouds as the final output. Results show that the developed method is promising, with automation of the whole process feasible from input (images) to output (labelled point clouds). Quantitative assessment gave good results for specific classes e.g., building facades and windows, with IoU scores of 0.79 and 0.77 respectively.

The availability of global navigation satellite systems (GNSS) on consumer devices has caused a dramatic change in every-day life and human behaviour globally. Although GNSS generally performs well outdoors, unavailability, intentional and unintentional threats, and reliability issues still remain. This has motivated the deployment of other complementary sensors in such a way that enables reliable positioning, even in GNSS-challenged environments. Besides sensor integration on a single platform to remedy the lack of GNSS, data sharing between platforms, such as in collaborative positioning, offers further performance improvements for positioning. An essential element of this approach is the availability of internode measurements, which brings in the strength of a geometric network. There are many sensors that can support ranging between platforms, such as LiDAR, camera, radar, and many RF technologies, including UWB, LoRA, 5G, etc. In this paper, to demonstrate the potential of the collaborative positioning technique, we use ultra-wide band (UWB) transceivers and vision data to compensate for the unavailability of GNSS in a terrestrial vehicle urban scenario. In particular, a cooperative positioning approach exploiting both vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) UWB measurements have been developed and tested in an experiment involving four cars. The results show that UWB ranging can be effectively used to determine distances between vehicles (at sub-meter level), and their relative positions, especially when vision data or a sufficient number of V2V ranges are available. The presence of NLOS observations is one of the principal factors causing a decrease in the UWB ranging performance, but modern machine learning tools have shown to be effective in partially eliminating NLOS observations. According to the obtained results, UWB V2I can achieve sub-meter level of accuracy in 2D positioning when GNSS is not available. Combining UWB V2I and GNSS as well V2V ranging may lead to similar results in cooperative positioning. Absolute cooperative positioning of a group of vehicles requires stable V2V ranging and that a certain number of vehicles in the group are provided with V2I ranging data. Results show that meter-level accuracy is achieved when at least two vehicles in the network have V2I data or reliable GNSS measurements, and usually when vehicles lack V2I data but receive V2V ranging to 2–3 vehicles. These working conditions typically ensure the robustness of the solution against undefined rotations. The integration of UWB with vision led to relative positioning results at sub-meter level of accuracy, an improvement of the absolute positioning cooperative results, and a reduction in the number of vehicles required to be provided with V2I or GNSS data to one.