Reconfigurable Intelligent Surfaces (RIS) have emerged as a transformative solution for enhancing spectral and energy efficiency in wireless networks. However, conventional RIS architectures, whether passive or active, face significant limitations due to trade-offs involving power consumption, signal amplification, and deployment complexity. This paper aims to overcome these limitations by developing an adaptive RIS architecture suitable for diverse transmission conditions. We propose a novel three-stage hybrid RIS system that dynamically switches among active, passive, and dormant modes based on channel quality and transmit power thresholds. A joint optimization framework is developed to enable adaptive mode selection, beamforming, and RIS configuration. This framework integrates mode-aware control logic and fractional programming to maximize system-wide sum-rate performance while minimizing energy consumption. Extensive simulations across varying propagation scenarios confirm that the proposed hybrid RIS outperforms conventional RIS designs in both spectral and energy efficiency. The results show that active mode yields high gains in low-power or obstructed channels, passive mode supports energy-efficient reflection under moderate conditions, and the dormant mode effectively conserves energy in high-power environments. Overall, the three-stage hybrid RIS architecture provides a robust, flexible, and high-performance solution, making it a promising candidate for future 6G wireless systems.
Distributed link-state routing protocols, including Open Shortest Path First (OSPF) and Intermediate System–Intermediate System (IS-IS), have successfully provided robust shortest path routing for IP networks. However, shortest path routing is inflexible and sometimes results in congestion on some critical links. By separating the control plane and the data plane, the centralized control of Software Defined Networking (SDN)-based approach possesses flexible routing capabilities. Fibbing is an approach that can achieve centralized control over a network running distributed routing protocols. In a Fibbing-controlled IP network, the controller cleverly generates fake protocol messages to manipulate routers to steer the flow of the desired paths. However, introducing fake nodes destroys the structure of the loop-free property of Loop-Free Alternate (LFA) that is used to achieve fast failure recovery in IP networks. This paper addresses this issue and presents a solution to provision routing paths so a Fibbing network can still apply LFA in the network. The proposed network jointly considers load-balanced and fast failure recovery. We formulate the problem as an integer linear programming problem. The numerical results reveal that the proposed method can provide 100% survivability against any single node or single link failure.
11 November 2025 in IEEE Open Journal of the Communications Society
Reconfigurable intelligent surfaces (RIS) have emerged as a key technology to enhance the performance of next-generation wireless networks by intelligently reconfiguring the propagation environment. In particular, simultaneously transmitting and reflecting RIS (STAR-RIS) extend this paradigm by enabling full-space coverage through concurrent reflection and transmission. This paper investigates a downlink multiple-input single-output (MISO) system assisted by a STAR-RIS and addresses the joint optimization of base station beamforming and RIS coefficients. To tackle the inherent non-convexity of this problem, we propose a reinforcement learning framework based on the Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm. The proposed approach formulates the design task as a continuous control problem, allowing the agent to directly learn interference-aware policies that adapt to dynamic channel conditions. Extensive simulations validate the effectiveness of the proposed framework. The results demonstrate that the TD3-based policy achieves stable convergence and significantly improves the achievable sum rate compared to the baseline Deep Deterministic Policy Gradient (DDPG) method and the passive RIS benchmark. Performance scaling with the number of RIS elements and transmit power is clearly observed, confirming the scalability of the approach. In addition, hyperparameter sensitivity analysis highlights the importance of learning rate and decay parameter tuning for robust training. Cumulative distribution function (CDF) comparisons further show that the proposed framework enhances both average throughput and reliability across different channel realizations. The findings establish deep reinforcement learning, and TD3 in particular, as a promising tool for real-time optimization in STAR-RIS-assisted wireless systems. The proposed framework provides a flexible and scalable solution for intelligent resource allocation, paving the way for more reliable and efficient 6G communication networks.
A potential candidate technology for the development of future 6G networks has been recognized as Reconfigurable Intelligent Surface (RIS). However, due to the variation in radio link quality, traditional passive RISs only accomplish a minimal signal gain in situations with strong direct links between user equipment (UE) and base station (BS). In order to get over this fundamental restriction of smaller gain, the idea of active RISs might be a suitable solution. In contrast to current passive RIS, which simply reflects and directs signals without any additional amplification, active RISs have the ability to enhance reflected signals by the incorporation of amplifiers inside its elements. However, with additional amplifiers, apart from the relatively complex attributes of RIS-assisted arrangements, the additional energy consumption of such technologies is often disregarded. So, there might be a tradeoff between the additional energy consumption for the RIS technologies and the overall gain acquired by deploying this potential advancement. The objective of this work is to provide a primary idea of a three-layer hybrid RIS-assisted configuration that is responsive to both active and passive RIS, as well as an additional dormant or inactive state. The single RIS structure should be capable of adjusting its overall configuration in response to fluctuations in transmit power and radio link quality. Furthermore, our fabricated passive RIS-assisted structure verifies a portion of the proposed idea, with simulations highlighting its advantages over standalone passive or active RIS-assisted technologies.
12 May 2026 in IEEE Open Journal of the Computer Society
In this paper, we address the problem of maximizing spectral efficiency (SE) for the downlink of a hybrid reconfigurable intelligent surface (RIS)-assisted multiple-input single-output (MISO) heterogeneous network (HetNet). We introduce a hybrid RIS architecture in which a small fraction of RIS elements operate as active amplifying elements, while the remaining elements operate as passive reflectors to assist the small base station (SBS)–user equipment (UE) link. We employ zero-forcing (ZF) beamforming at the SBS and then optimize the hybrid RIS phase shifts via a Rao-enhanced Whale Optimization Algorithm (WOA-Rao). We benchmark WOA-Rao against particle swarm optimization (PSO), grey wolf optimizer (GWO), and semidefinite relaxation (SDR) under realistic path-loss, Rician/Rayleigh fading, noise, and power constraints. Extensive simulations demonstrate that WOA-Rao converges rapidly to high-quality solutions and consistently outperforms PSO, GWO, and SDR in SE gains and convergence speed; SE further improves with more RIS elements and higher SBS power, and an effective RIS placement distance is identified to balance SBS–RIS and RIS–UE link quality. An active-element-ratio ablation study further shows that the selected $12\%$ active-element ratio provides a practical SE and energy-efficiency (EE) tradeoff. These results demonstrate the effectiveness of hybrid active–passive RIS designs combined with metaheuristic optimization for next-generation wireless HetNets.