18 March 2025 in IEEE Access
This paper proposes an unmanned aerial vehicle (UAV)-assisted intelligent reflecting surface (IRS) system for improving the network performance between ground-to-ground (G2G) users in 5G/6G wireless communication. This work may be applicable for packet delivery in bustling urban areas, especially where G2G links are in deep fade. For energizing the IRS elements and controlling the processing units of the UAV, radio-frequency (RF)-based energy harvesting (EH) is proposed at UAV, where the dynamic power splitting factor depends on the height-dependent Nakagami-m shaping parameter (m). The mathematical framework for the proposal includes the height-dependent Nakagami-m fading to represent small-scale fading and height-dependent path-loss exponent to model large-scale fading. We develop the expression for spectral efficiency and derive a closed-form expression of an outage probability for the proposed scenario by considering Nakagami-m channel among A2G links. The analytical results are validated with simulation results, and the work is compared with the existing state-of-the-art.
28 August 2025 in IEEE Open Journal of the Computer Society
Reconfigurable Intelligent Surfaces (RIS) have emerged as a transformative solution for enhancing spectral and energy efficiency in wireless networks. However, conventional RIS architectures, whether passive or active, face significant limitations due to trade-offs involving power consumption, signal amplification, and deployment complexity. This paper aims to overcome these limitations by developing an adaptive RIS architecture suitable for diverse transmission conditions. We propose a novel three-stage hybrid RIS system that dynamically switches among active, passive, and dormant modes based on channel quality and transmit power thresholds. A joint optimization framework is developed to enable adaptive mode selection, beamforming, and RIS configuration. This framework integrates mode-aware control logic and fractional programming to maximize system-wide sum-rate performance while minimizing energy consumption. Extensive simulations across varying propagation scenarios confirm that the proposed hybrid RIS outperforms conventional RIS designs in both spectral and energy efficiency. The results show that active mode yields high gains in low-power or obstructed channels, passive mode supports energy-efficient reflection under moderate conditions, and the dormant mode effectively conserves energy in high-power environments. Overall, the three-stage hybrid RIS architecture provides a robust, flexible, and high-performance solution, making it a promising candidate for future 6G wireless systems.
27 October 2025 in TechRxiv
This paper presents a novel power allocation strategy, referred to as Joint Sensing-Constrained Optimization for Dynamic Allocation (JSCO-DA), designed for orthogonal frequencydivision multiplexing (OFDM) systems operating in integrated sensing and communication (ISAC) environments. Unlike traditional water-filling methods that prioritize communication performance alone, JSCO-DA incorporates critical sensing constraints namely, Peak Sidelobe Level (PSL) and Cramer-Rao Bound (CRB) into the optimization framework. The algorithm dynamically fuses the classical waterfilling approach with sensing-aware power profiles to ensure compliance with both communication and sensing objectives, while keeping the resulting capacity loss within an acceptable bound. Simulation results reveal that JSCO-DA consistently outperforms conventional dynamic allocation techniques by delivering enhanced capacity, energy efficiency, and spectral efficiency under joint PSL-CRB constraints. These results highlight the potential of JSCO-DA as a practical and efficient solution for emerging ISAC-enabled OFDM systems.
1 April 2026 in Physical Communication
27 October 2025 in TechRxiv
This paper presents the spectral and energy efficiency optimization of Hybrid Reconfigurable Intelligent Surfaces (RIS) in downlink multiuser multiple-input single-output (MU-MISO) wireless communication systems. A hybrid RIS architecture, comprising both active and passive reflecting elements, is considered to balance the trade off between system performance and energy consumption. We formulate a sum rate maximization problem under practical power constraints on the active RIS elements and propose an efficient alternating optimization algorithm. Specifically, the beamforming vectors at the base station are updated via Zero-Forcing (ZF) precoding, while the active RIS configuration is optimized using sequential convex programming (SCP) techniques. To ensure numerical stability and practical feasibility, robust regularization and power control mechanisms are integrated into the RIS optimization. Simulation results demonstrate that the proposed hybrid RIS-assisted system achieves significant improvements in both spectral efficiency (SE) and energy efficiency (EE) compared to conventional passive RIS, fully active RIS, and no-RIS baseline systems. These findings highlight the potential of hybrid RIS architectures as a promising solution for next generation green and high capacity wireless networks.
25 September 2023 in arXiv
A potential candidate technology for the development of future 6G networks has been recognized as Reconfigurable Intelligent Surface (RIS). However, due to the variation in radio link quality, traditional passive RISs only accomplish a minimal signal gain in situations with strong direct links between user equipment (UE) and base station (BS). In order to get over this fundamental restriction of smaller gain, the idea of active RISs might be a suitable solution. In contrast to current passive RIS, which simply reflects and directs signals without any additional amplification, active RISs have the ability to enhance reflected signals by the incorporation of amplifiers inside its elements. However, with additional amplifiers, apart from the relatively complex attributes of RIS-assisted arrangements, the additional energy consumption of such technologies is often disregarded. So, there might be a tradeoff between the additional energy consumption for the RIS technologies and the overall gain acquired by deploying this potential advancement. The objective of this work is to provide a primary idea of a three-layer hybrid RIS-assisted configuration that is responsive to both active and passive RIS, as well as an additional dormant or inactive state. The single RIS structure should be capable of adjusting its overall configuration in response to fluctuations in transmit power and radio link quality. Furthermore, our fabricated passive RIS-assisted structure verifies a portion of the proposed idea, with simulations highlighting its advantages over standalone passive or active RIS-assisted technologies.