Monitoring the nitrate concentration in the field is an excellent ability for a water-monitoring study. We report an Interdigital FR4-based capacitive sensor, which is characterized for nitrate concentration. The concentration range of nitrate is 0-40 ppm (mg/L). Different unknown samples were measured and validated with standard UV-Spectrometry. A smart sensing node has been developed which can collect water from a lake, stream, or river, measure the instantaneous nitrate concentration, and transfer the data through the gateway to a user-defined cloud server. The system is completely autonomous and solar powered, robust, and trialed in the field successfully. A simple moving-average algorithm is used to smooth the collected data in the cloud side. The LoRa protocol and WiFi protocol are compared in terms of power consumption. The proposed system is trialed in the field continuously and the result validated with standard UV-Spectrometry. The developed smart system can be easily deployable and friendly to use, and offers new possibilities for both spatial and temporal analysis for nitrate concentration.

This paper reviews the literature on nitrate leaching and nitrogen (N) runoff under intensive dairy pasture systems in Australia and draws comparisons with research undertaken under similar climates and farming systems internationally, with the aim to inform future research in this area. An Australian nitrate-leaching study suggests that annual nitrate-leaching loads are lower (3.7–14.5 kg N ha–1 year–1 for nil N and 6–22 kg N ha–1 year–1 for 200 kg N ha–1 applied) than the range previously measured and modelled on New Zealand dairy farms (~18–110 kg N ha–1 year–1). It is likely that nitrate-leaching rates are higher in New Zealand because of the prevalence of free-draining soils and higher average stocking rates. However, this review highlights that there are insufficient Australian nitrate-leaching data, particularly following urine application, to undertake a rigorous comparison. Median N surpluses on Australian dairy farms are higher (198 kg N ha–1) than values for an average New Zealand farm (135 kg N ha–1). Given the facts that many soils used for intensive pasture production in Australia are lightly textured or free-draining clay loams receiving average rainfall of >800 mm year–1, that herd sizes have risen in the last 10 years and that water quality is a concern in some dairy catchments, nitrate leaching could be an issue for the Australian dairy industry. Australian data on surface runoff of N are more available, despite its overall contribution to N losses being low (generally <5 kg N ha–1 year–1), except under border-check flood irrigation or hump-and-hollow surface drainage (3–23 kg N ha–1 year–1). More research is needed to quantify surface N runoff and leaching following effluent application and to examine dissolved organic forms of N loss, particularly in view of the continued intensification of the Australian dairy industry.

Nine pasture soils from high rainfall zones of southern Victoria were analysed for a range of chemical and physical properties before receiving a single application of P fertiliser in the form of triple superphosphate (TSP), single superphosphate (SSP), or TSP and lime (5 t/ha) at amounts ranging from 0 to 280 kg P/ha. Soils were analysed for bicarbonate-extractable P concentration, using both the Olsen P and Colwell P methods, 6 and 12 months after fertiliser application. A strong positive linear relationship existed at all sites between the amount of P applied and both the Olsen P and Colwell P concentrations. The slopes of these relationships measured the change in extractable P concentration (Δ EP) per unit of P applied, whilst the inverse of the ΔEP value indicated the amount of P fertiliser required above maintenance to increase the extractable P concentration by 1 mg/kg. These values ranged from 5 to 15 kg P/ha, depending on soil type. The ΔEP measured by the Olsen (Δ EP Olsen ) method was closely related to selected soil properties and P sorption measures, whilst the ΔEPColwell values were also closely related to selected soil properties and P sorption measures, but only when one particular site, an acidic sand, with a high organic carbon content was excluded from the analysis. In general, simple, direct measures of soil P sorption could allow the estimation of ΔEP values on different soil types. The application of P in the form of SSP resulted in a trend for higher ΔEP values than occurred with TSP. This difference was significant on 3 sites ( P < 0.05), but depended on the method of extraction and the time after fertiliser application. The application of lime significantly ( P < 0.001) increased soil pH (H2 O and CaCl 2 ) and decreased the concentration of exchangeable Al, 6 months after treatments were applied, but generally had little impact on ΔEP values.

Rice is the primary energy source of more than half of the global population. Challenges persist in managing phosphorus (P) in paddy soils of tropical rice-growing countries. In Sri Lanka, one specific challenge is the inconsistent yield response observed when inorganic P fertilisers are applied to paddy soils. Previous research conducted in Sri Lanka has shown that the rice yield response to added P fertilisers cannot be adequately explained by factors such as soil available P, irrigation schemes, soil texture, pH, electrical conductivity, total carbon content and available Fe and Mg concentrations. Due to the submerged conditions in which rice is grown for a significant portion of its lifespan, a unique environment controlled by redox-driven processes is developed in paddy soils. Therefore, releasing P from submerged soils is an outcome influenced by complex hydrological and biogeochemical processes, strongly influenced by inherent soil characteristics. The present review paper aimed to critically examine existing literature on soil P behaviour in submerged paddy soils of Sri Lanka, to clarify the behaviour of P under submergence, identify the factors affecting such behaviour and highlight the research gaps that need to be addressed, in order to effectively manage P in the paddy soils of Sri Lanka.

Silvopastoral systems can be innovative solutions to agricultural environmental degradation, especially in hilly and mountainous regions. A framework that expresses the holistic nature of silvopastoral systems is required so research directions can be unbiased and informed. This paper presents a novel framework that relates the full range of known silvopastoral outcomes to bio-physical tree attributes, and uses it to generate research priorities for a New Zealand hill country case study. Current research is reviewed and compared for poplar (Populus spp.), the most commonly planted silvopastoral tree in New Zealand hill country, and kānuka (Kunzea spp.), a novel and potentially promising native alternative. The framework highlights the many potential benefits of kānuka, many of which are underappreciated hill country silvopastoral outcomes, and draws attention to the specific outcome research gaps for poplar, despite their widespread use. The framework provides a formalised tool for reviewing and generating research priorities for silvopastoral trees, and provides a clear example of how it can be used to inform research directions in silvopastoral systems, globally.