The compounds found in industrial wastewater typically show high toxicity, and in this way, they have become a primary environmental concern. Several techniques have been applied in industrial effluent remediation. In spite of the efforts, these techniques are yet to be ineffective to treat oily wastewater before it can be discharged safely to the environment. Membrane technology is an attractive approach to treat oily wastewater. This is dedicated to the immobilisation of TiO₂ nanoparticles on poly(vinylidene fluoride–trifluoro ethylene) (PVDF-TrFE) porous matrix by solvent casting. Membranes with interconnected pores with an average diameter of 60 µm and a contact angle of 97°, decorated with TiO₂ nanoparticles, are obtained. The degradation of oily wastewater demonstrated the high photocatalytic efficiency of the nanocomposite membranes: Under sunlight irradiation for seven hours, colourless water was obtained.

Two significant limitations of using TiO₂ nanoparticles for water treatment applications are reduced photocatalytic activity under visible radiation and difficulty recovering the particles after use. In this study, round-shaped Ag@TiO₂ nanocomposites with a ≈21 nm diameter and a bandgap energy of 2.8 eV were synthesised by a deposition-precipitation method. These nanocomposites were immobilised into a porous poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) matrix and well-distributed within the pores. The photocatalytic activity of Ag@TiO₂/PVDF-HFP against metronidazole (MNZ) under solar radiation was evaluated. Further, an adaptive neuro-fuzzy inference system (ANFIS) was applied to predict the effect of four independent variables, including initial pollutant concentration, pH, light irradiation intensity, and reaction time, on the photocatalytic performance of the composite membrane on MNZ degradation. The 10% Ag@TiO₂/PVDF-HFP composite membrane showed a maximum removal efficiency of 100% after 5 h under solar radiation. After three use cycles, this efficiency remained practically constant, demonstrating the membranes’ reusability and suitability for water remediation applications.

Over the last decades, the growing contamination of wastewater, mainly caused by industrial processes, improper sewage, natural calamities, and a variety of anthropogenic activities, has caused an increase in water-borne diseases. Notably, industrial applications require careful consideration as they pose significant threats to human health and ecosystem biodiversity due to the production of persistent and complex contaminants. The present work reports on the development, characterization, and application of a poly (vinylidene fluoride—hexafluoropropylene) (PVDF-HFP) porous membrane for the remediation of a wide range of contaminants from wastewater withdrawn from industrial applications. The PVDF-HFP membrane showed a micrometric porous structure with thermal, chemical, and mechanical stability and a hydrophobic nature, leading to high permeability. The prepared membranes exhibited simultaneous activity on the removal of organic matter (total suspended and dissolved solids, TSS, and TDS, respectively), the mitigation of salinity in 50%, and the effective removal of some inorganic anions and heavy metals, achieving efficiencies around 60% for nickel, cadmium, and lead. The membrane proved to be a suitable approach for wastewater treatment, as it showed potential for the simultaneous remediation of a wide range of contaminants. Thus, the as-prepared PVDF-HFP membrane and the designed membrane reactor represent an efficient, straightforward, and low-cost alternative as a pretreatment step for continuous treatment processes for simultaneous organic and inorganic contaminants’ remediation in real industrial effluent sources.