Four-rotor micro aerial robots, so called quadrotor UAVs, are one of the most preferred type of unmanned aerial vehicles for near-area surveillance and exploration both in military and commercial in- and outdoor applications. The reason is the very easy construction and steering principle using four rotors in a cross configuration. However, stabilizing control and guidance of these vehicles is a difficult task because of the nonlinear dynamic behavior. In addition, the small payload and the reduced processing power of the onboard electronics are further limitations for any control system implementation. This paper describes the development of a nonlinear vehicle control system based on a decomposition into a nested structure and feedback linearization which can be implemented on an embedded microcontroller. Some first simulation results underline the performance of this new control approach for the current realization.

The spread of Unmanned Aerial Vehicles (UAVs) in the last decade revolutionized many applications fields. Most investigated research topics focus on increasing autonomy during operational campaigns, environmental monitoring, surveillance, maps, and labeling. To achieve such complex goals, a high-level module is exploited to build semantic knowledge leveraging the outputs of the low-level module that takes data acquired from multiple sensors and extracts information concerning what is sensed. All in all, the detection of the objects is undoubtedly the most important low-level task, and the most employed sensors to accomplish it are by far RGB cameras due to costs, dimensions, and the wide literature on RGB-based object detection. This survey presents recent advancements in 2D object detection for the case of UAVs, focusing on the differences, strategies, and trade-offs between the generic problem of object detection, and the adaptation of such solutions for operations of the UAV. Moreover, a new taxonomy that considers different heights intervals and driven by the methodological approaches introduced by the works in the state of the art instead of hardware, physical and/or technological constraints is proposed.

In recent years, Simultaneous Localization and Mapping (SLAM) systems have shown significant performance, accuracy, and efficiency gain. In this regard, Visual Simultaneous Localization and Mapping (VSLAM) methods refer to the SLAM approaches that employ cameras for pose estimation and map reconstruction and are preferred over Light Detection And Ranging (LiDAR)-based methods due to their lighter weight, lower acquisition costs, and richer environment representation. Hence, several VSLAM approaches have evolved using different camera types (e.g., monocular or stereo), and have been tested on various datasets (e.g., Technische Universität München (TUM) RGB-D or European Robotics Challenge (EuRoC)) and in different conditions (i.e., indoors and outdoors), and employ multiple methodologies to have a better understanding of their surroundings. The mentioned variations have made this topic popular for researchers and have resulted in various methods. In this regard, the primary intent of this paper is to assimilate the wide range of works in VSLAM and present their recent advances, along with discussing the existing challenges and trends. This survey is worthwhile to give a big picture of the current focuses in robotics and VSLAM fields based on the concentrated resolutions and objectives of the state-of-the-art. This paper provides an in-depth literature survey of fifty impactful articles published in the VSLAMs domain. The mentioned manuscripts have been classified by different characteristics, including the novelty domain, objectives, employed algorithms, and semantic level. The paper also discusses the current trends and contemporary directions of VSLAM techniques that may help researchers investigate them.

Uncertain dynamic obstacles such as pedestrians or vehicles pose a major challenge for optimal robot navigation with safety guarantees. Previous work on motion planning have followed two main strategies to provide a safe bound on an obstacle's space: a polyhedron, such as a cuboid, or a nonlinear differentiable surface, such as an ellipsoid. The former approach relies on disjunctive programming, which has a relatively high computational cost that grows exponentially with the number of obstacles. The latter approach needs to be linearized locally to find a tractable evaluation of the chance constraints, which dramatically reduces the remaining free space and leads to over-conservative trajectories or even unfeasibility. In this work, we present a hybrid approach that eludes the pitfalls of both strategies while maintaining the original safety guarantees. The key idea consists in obtaining a safe differentiable approximation for the disjunctive chance constraints bounding the obstacles. The resulting nonlinear optimization problem is free of chance constraint linearization and disjunctive programming, and therefore, it can be efficiently solved to meet fast real-time requirements with multiple obstacles. We validate our approach through mathematical proof, simulation and real experiments with an aerial robot using nonlinear model predictive control to avoid pedestrians.

Mobile robots should be aware of their situation , comprising the deep understanding of their surrounding environment along with the estimation of its own state, to successfully make intelligent decisions and execute tasks autonomously in real environments. 3D scene graphs are an emerging field of research that propose to represent the environment in a joint model comprising geometric, semantic and relational/topological dimensions. Although 3D scene graphs have already been combined with SLAM techniques to provide robots with situational understanding, further research is still required to effectively deploy them on-board mobile robots. To this end, we present in this paper a novel, real-time, online built Situational Graph ( S-Graph ), which combines in a single optimizable graph, the representation of the environment with the aforementioned three dimensions, together with the robot pose. Our method utilizes odometry readings and planar surfaces extracted from 3D LiDAR scans, to construct and optimize in real-time a three layered S-Graph that includes (1) a robot tracking layer where the robot poses are registered, (2) a metric-semantic layer with features such as planar walls and (3) our novel topological layer constraining the planar walls using higher-level features such as corridors and rooms. Our proposal does not only demonstrate state-of-the-art results for pose estimation of the robot, but also contributes with a metric-semantic-topological model of the environment.

Poaching is an illegal activity that remains out of control in many countries. Based on the 2014 report of the United Nations and Interpol, the illegal trade of global wildlife and natural resources amounts to nearly $ 213 billion every year, which is even helping to fund armed conflicts. Poaching activities around the world are further pushing many animal species on the brink of extinction. Unfortunately, the traditional methods to fight against poachers are not enough, hence the new demands for more efficient approaches. In this context, the use of new technologies on sensors and algorithms, as well as aerial platforms is crucial to face the high increase of poaching activities in the last few years. Our work is focused on the use of vision sensors on UAVs for the detection and tracking of animals and poachers, as well as the use of such sensors to control quadrotors during autonomous vehicle following and autonomous landing.