We present an experimental study on the optical quality of InAs/InP quantum dots (QDs). Investigated structures have application relevance due to emission in the 3rd telecommunication window. The nanostructures are grown by ripening-assisted molecular beam epitaxy. This leads to their unique properties, i.e., low spatial density and in-plane shape symmetry. These are advantageous for non-classical light generation for quantum technologies applications. As a measure of the internal quantum efficiency, the discrepancy between calculated and experimentally determined photon extraction efficiency is used. The investigated nanostructures exhibit close to ideal emission efficiency proving their high structural quality. The thermal stability of emission is investigated by means of microphotoluminescence. This allows to determine the maximal operation temperature of the device and reveal the main emission quenching channels. Emission quenching is predominantly caused by the transition of holes and electrons to higher QD’s levels. Additionally, these carriers could further leave the confinement potential via the dense ladder of QD states. Single QD emission is observed up to temperatures of about 100 K, comparable to the best results obtained for epitaxial QDs in this spectral range. The fundamental limit for the emission rate is the excitation radiative lifetime, which spreads from below 0.5 to almost 1.9 ns (GHz operation) without any clear spectral dispersion. Furthermore, carrier dynamics is also determined using time-correlated single-photon counting.
The design of transparent conductive electrodes (TCEs) for optoelectronic devices requires a trade‐off between high conductivity and transmittivity, limiting their efficiency. This paper demonstrates the best ever achieved TCEs with the novel approach to fabricating TCEs that effectively alleviates this trade‐off: a monolithic high contrast grating integrated with metal (metalMHCG). The metalMHCG enables higher electrical conductivity than other TCEs, while providing transmissive and antireflective properties. It focuses on infrared spectrum TCEs, which are essential for sensing, thermal imaging, and automotive applications. However, due to elevated free carrier absorption, they are much more demanding than TCEs for the visible spectrum. It demonstrates a record 75% absolute transmittiance of unpolarized light, resulting in a record 108% transmittance relative to plain GaAs substrate. It achieves even larger absolute transmittance of polarized light, reaching 92% or 133% relative transmittance. Despite the record high transmittance, the sheet resistance of the metalMHCG is the best ever reported, several times lower than any other TCE, ranging from 0.5 to 1 Ω Sq−1.
In this study, an analysis of the optical performance of two types of distributed Bragg reflector structures based on GaAs and InP material systems was carried out. The structures were designed for maximum performance at 4 µm with their reflectivity achieving between 80 and 90% with eight pairs of constituent layers. To further enhance the performance of these structures, additional Au layers were added at the bottom of the structure with Ti pre-coating applied to improve the adhesivity of the Au to the semiconductor substrate. The optimal range of Ti layer thickness resulting in the improvement of the maximum reflectivity was determined to be in between 5 and 15 nm.