Remote-sensing ocean colour studies have already been used to determine coastal water quality, coastal biodiversity, and nutrient availability. In recent years, Unmanned Aerial Vehicles (UAVs) equipped with multispectral sensors, originally designed for agriculture applications, have also enabled water-quality studies of coastal waters. However, since the sea surface is constantly changing, commonly used photogrammetric methods fail when applied to UAV images captured over water areas. In this work, we evaluate the applicability of a five-band multispectral sensor mounted on a UAV to derive scientifically valuable water parameters such as chlorophyll-a (Chl-a) concentration and total suspended solids (TSS), including a new Python workflow for the manual generation of an orthomosaic in aquatic areas exclusively based on the sensor’s metadata. We show water-quality details in two different sites along the Maltese coastline on the centimetre-scale, improving the existing approximations that are available for the region through Sentinel-3 OLCI imagery at a much lower spatial resolution of 300 m. The Chl-a and TSS values derived for the studied regions were within the expected ranges and varied between 0 to 3 mg/m3 and 10 to 20 mg/m3, respectively. Spectral comparisons were also carried out along with some statistics calculations such as RMSE, MAE, or bias in order to validate the obtained results.
In recent years, we have been witnessing the widespread use of low-cost, increasingly high-performance Unmanned Aerial Vehicles, or UAVs, equipped with a large number of sensors capable of extracting detailed information on several scales and in an immediate manner. This study was motivated by the need to perform a geological survey in an area with difficult physical access, and to compare the results with those from conventional surveys. Here we used a Multirotor UAV equipped with a high definition RGB camera and the digital photogrammetry technique to reconstruct a three-dimensional model of the Selmun promontory, located in the northern part of the island of Malta (central Mediterranean Sea). In this area, the evident cliff retreat is linked to landslide processes involving the outcropping geological succession, characterized by the over position of stiff limestones on ductile clays. Such an instability process consists of a lateral spreading associated with toppling and fall of different-size rock blocks. Starting from the 3D model obtained from the UAV-photogrammetry, a digital geological-structural survey was performed in which we identified the spatial geometry of the fractures that characterize the area of the Selmun promontory by measuring strike, dip and dip direction of the fractures with semi-automatic digital tools. Furthermore, we were able to measure the size and volume of singularized rock masses as well as cracks, and their sizes were mapped in a GIS environment that contains a large number of digital structural measures. It is the first application of this type for the Maltese islands and the results obtained with this innovative digital methodology were then compared with those of the traditional field survey of the same area acquired during a previous campaign. This study demonstrated how the innovation of digital geological surveying lies in the possibility of mapping areas and geological features not detectable with traditional methods, mainly due to the high risk associated with the stability of the cliff or, more generally, the inaccessibility of some sites, therefore allowing the user to operate in safety and to detect in detail the most remote rocky outcrops.
The northern region of the Maltese archipelago is experiencing lateral spreading landslide processes. This region is characterized by cliffs with a hard coralline limestone outcropping layer sitting on a thick layer of clay. Such a geological configuration causes coastal instability that results in lateral spreading which predispose to rockfalls and topplings all over the cliff slopes. The aim of this research was to develop a methodology for evaluating cliff erosion/retreat using the integration of geomatics and geophysical techniques. Starting from a 3D digital model of the Selmun promontory, generated by unmanned aerial vehicle (UAV) photogrammetry, it was possible to map the fractures and conduct geophysical measurements such as electrical resistivity tomography and ground penetrating radar for the identification and mapping of vertical fractures affecting the hard coralline limestone plateau, and to create a 3D geological model of the study area. In addition to this, high-accuracy orthophotos from UAV that were captured between 1957 and 2021 were georeferenced into a GIS and compared to aerial and satellite images. The movement and evolution of boulders and cracks in rocks were then vectorized to highlight, track and quantify the phenomenon through time. The results were used to derive a qualitative assessment of the coastal variations in the geometric properties of the exposed discontinuity surfaces to evaluate the volumes and the stop points of the observed rockfalls. The outcomes of this research were finally imported in a GIS which offers an easy approach for the collection and processing of coastal monitoring data. In principle, such a system could help local authorities to address social, economic and environmental issues of pressing importance as well as facilitate effective planning in view of a risk mitigation strategy.
Ambient seismic noise has gained extensive applications in seismology and plays a pivotal role in environmental seismic studies. This study focuses on the Río de la Plata Coastal Plain, employing the horizontal-to-vertical spectral ratio (HVSR) method on ambient seismic noise records to analyze subsurface dynamics. The region’s hydrogeology is complex, featuring partially interconnected coastal aquifers. The HVSR analysis reveals two peaks, with P0 associated with the sediment-basement interface and P1 linked to a shallower stratigraphic discontinuity. Temporal analysis of P1 highlights cyclical patterns correlated with estuarine levels, suggesting a relationship between variations in seismic velocities and tidal dynamics. Comparisons with aquifer data support the hypothesis that tidal variations influence subsurface mechanical properties, impacting the HVSR function. The study hints at the potential of ambient seismic noise analysis as a non-invasive and cost-effective method for studying coastal aquifers and understanding groundwater dynamics. Ongoing research aims to further explore these relationships for enhanced groundwater resource management.
Sea caves are a type of cave formed primarily by the wave action of the sea. The coastal scenery of the Gozitan coast is very interesting in that sea caves and other coastal landforms, such as sea arches, develop at the sea level. We mapped seventy-nine semi-submerged sea caves opening at the sea level, five completely submerged sea caves, seven sea arches, one sea stack, and one shelter around the coast of Gozo, mainly in the Western and Eastern parts of the island, due to favorable lithological and topographical conditions. Additionally, we surveyed the topography of the emerged part of nine sea caves using the iPhone build-in LiDAR sensor, and eight sea caves in the submerged part using SCUBA equipment. This inventory represents the most detailed example of a database of coastal caves and related forms in the Mediterranean, mainly sourced from a swimming survey along the entire island. Thanks to the combination of outputs of the above-water emerged and submerged surveys, we defined three types of semi-submerged sea caves: (i) box caves, (ii) joint caves, and (iii) complex caves. Moreover, we added a cave-like landform above the sea level on calcarenites called shelter, or a little extended notch deeply carved into the cliff. The shape mainly depends on the structural and lithological setting of sea cliffs. In the Western sector of the island, we also discovered the only sea cave in Gozo, measuring 122 m in length and 10 m in width, with its floor developing above the mean sea level. This cave base is of interest due to rounded landforms related to marine erosion. In the innermost part of the cave, there is also a beach with rounded pebble at an elevation of about 7 m asl. Considering the tectonic stability of the island, it could be possibly related to the MIS 5.5 highstand.
The Wied il-Mielaħ Window (Gozo–Malta) is a limestone natural arch on the north-western coast of the island of Gozo in Malta. It is located at the end of the Wied il-Mielaħ valley north of the village of Għarb. This natural arch is less well known than the Azure Window, which collapsed in March 2017 following a heavy storm, but notwithstanding, it is an imposing and important natural monument too. In the past, the Wied il-Mielah valley was responsible for discharging wastewater from the surrounding localities to the Mediterranean directly at the Wied il-Mielah Window. The sewage flag was often clearly visible underneath the archway into the open sea. The natural features of the arch provide an outstanding touristic attraction. To avoid what happened to the Azure Window, a methodology for the evaluation of the collapse hazard, combining passive seismic, ground penetrating radar (GPR), geological/geomorphological surveys and mine engineering methods, is here proposed. In this study, a methodological approach was applied, based on the following: (i) passive seismic method to study the physical–mechanical characteristics of the rock mass that constitutes the window; (ii) GPR method in order to demonstrate the conservation state (i.e., the intensity of fracturing); (iii) geological/geomorphological surveys in order to obtain a crack pattern; and (iv) scaled span empirical analysis in order to evaluate the stability of the arch. The calculation of the safety factor, with a static method, gave a value equal to 3.75 with a probability of collapse of the marine arch within 50 and 100 years.