The roll coating method is of considerable significance in several industries, as it is applied practically in the production of paint, the manufacturing of PVC-coated cloth, and the plastic industry. The current study theoretically and computationally analyses the Powell–Eyring fluids with variable viscosity during the non-isothermal roll-over web phenomenon. Based on the lubrication approximation theory (LAT), the problem was formulated. The system of partial differential equations (PDEs) obtained from the mathematical modeling was further simplified to a set of ordinary differential equations (ODEs) using suitable transformations. A regular perturbation method was implemented to obtain the solution in terms of velocity, pressure gradient, pressure, and flow rate per unit width. This study also captures important engineering characteristics such as coating thickness, Nusselt number, shear stress, roll/sheet separating force, and roll-transmitted power to the fluid. Along with a comparison between the present work and published work, both graphical and tabular representations wer made to study the effects of various factors. It was observed that the velocity profile is the decreasing function of non-Newtonian and Reynold viscosity parameters. In addition, the response surface methodology (RSM) was employed to investigate the sensitivity of the shear stress and the Nusselt number.
The fundamental and essential objective of the wire coating process is to reduce the shear stress and extraction force exerted on the wire from the die in order to achieve practical benefits. Therefore, the purpose of the present work is to develop a mathematical model for the wire coating process withdrawal of the wire from the die. The Sisko fluid model and the temperature-dependent thermophysical properties are taken into consideration for modelling the constitutive equation. The basic equations governing the flow are solved with the aid of the numerical method. The impact of key factors is scrutinized. The influence of shear stress on the surface of the wire and fluid flow rate are delineated. The linear regression model is formulated to explore the significance of the relationship between the amount of force required to pull the wire and flow control variables. Moreover, the heat transfer rate and shear stress rate of molten polymer are modeled using quadratic correlation models obtained through the Central Composite Design (CCD) technique. To simultaneously achieve maximum heat transfer rate and minimum shear stress rate for the melt, the ideal values of the variable viscosity parameter, Sisko fluid parameter, and Brinkman number are determined. The study reveals that the required result occurs for a low level of the variable viscosity parameter, Sisko fluid parameter, and the Brinkman number. Additionally, a sensitivity analysis has been performed. The result reveals that the shear stress rate and heat transfer rate exhibit the highest sensitivity to variations in the viscosity parameter.
The demand for energy due to the population boom, together with the harmful consequences of fossil fuels, makes it essential to explore renewable thermal energy. Solar Thermal Systems (STS’s) are important alternatives to conventional fossil fuels, owing to their ability to convert solar thermal energy into heat and electricity. However, improving the efficiency of solar thermal systems is the biggest challenge for researchers. Nanomaterial is an effective technique for improving the efficiency of STS’s by using nanomaterials as working fluids. Therefore, the present theoretical study aims to explore the thermal energy characteristics of the flow of nanomaterials generated by the surface gradient (Marangoni convection) on a disk surface subjected to two different thermal energy modulations. Instead of the conventional Fourier heat flux law to examine heat transfer characteristics, the Cattaneo–Christov heat flux (Fourier’s heat flux model) law is accounted for. The inhomogeneous nanomaterial model is used in mathematical modeling. The exponential form of thermal energy modulations is incorporated. The finite-difference technique along with Richardson extrapolation is used to treat the governing problem. The effects of the key parameters on flow distributions were analyzed in detail. Numerical calculations were performed to obtain correlations giving the reduced Nusselt number and the reduced Sherwood number in terms of relevant key parameters. The heat transfer rate of solar collectors increases due to the Marangoni convection. The thermophoresis phenomenon and chaotic movement of nanoparticles in a working fluid of solar collectors enhance the temperature distribution of the system. Furthermore, the thermal field is enhanced due to the thermal energy modulations. The results find applications in solar thermal exchanger manufacturing processes.
1 February 2022 in Communications in Theoretical Physics
This examination emphasizes the analysis of thermal transmission of Carreau fluid flow on a permeable sensor surface equipped with radiation, Joule heating, an internal heat source, and a magnetic field. With the above effects and assumptions, the equations that administer the flow are formulated. A configured system of equations is productively reduced to a system of ordinary differential equations. The reduced system is then dealt with using the Runge–Kutta-Fehlberg fourth–fifth order tool equipped by the shooting technique. Derived numerical solutions are utilized to plot graphs and tables. The conclusion of the study outlines some important findings such as the power law index, the thermal radiation parameter and the heat source parameter enhance the thermal panel whereas the Weissenberg number deescalates the same. The power law index and permeable velocity decrease the velocity panel significantly. Diagrammatic representation of streamlines of the flow has been given to strengthen the study. A detailed description has been produced about the results obtained in the study.
This study examines heat transfer in a two-dimensional flow of nano liquid ( ) over a linearly elongated sheet under magnetic field with temperature-dependent thermophysical properties. A numerical investigation using the Homotopy perturbation technique is carried out to analyze the heat transfer in the flow by considering the quadratic form of Boussinesq approximation, and thermal radiation. The importance of the parameters affecting the Momentum and thermal characteristics of the flow is analyzed through 2D plots, streamlines, and surface plots. Further, a regression model for the Nusselt number and friction factor is constructed to check the statistical significance of the parameters involved in the model. The findings indicate a smooth transition from the initial unsteady state to the final steady state. Moreover, the quadratic or non-linear convection parameter, heat source/sink parameter, improves the rate of heat transfer and magnetic parameter, and the angle of inclination diminishes the friction factor.