This paper proposes a switched-capacitor multilevel inverter for high-frequency ac power distribution systems. The proposed topology produces a staircase waveform with higher number of output levels employing fewer components compared to several existing switched-capacitor multilevel inverters in the literature. This topology is beneficial where asymmetric dc voltage sources are available, e.g., in case of renewable energy farms based ac microgrids and modern electric vehicles. Utilizing the available dc sources as inputs for a single inverter solves the major problem of connecting several inverters in parallel. Additionally, the need to stack voltage sources, like batteries or supercapacitors, in series which demand charge equalization algorithms, are eliminated as the voltage sources employed share a common ground. The inverter inherently solves the problem of capacitor voltage balancing as each capacitor is charged to the value equal to one of the input voltage every cycle. State analysis, losses, and the selection of capacitance are examined. Simulation and experimental results at different distribution frequencies, power levels, and output harmonic content are provided to demonstrate the feasibility of the proposed multilevel inverter topology.

This letter describes two improved 13-level inverters based on switched-capacitor. Compared with their original structure, which is published recently, one less high-voltage capacitor is required in the proposed inverters and the blocking voltage of their inverting half-bridge is reduced by half. In addition, the new inverters inherit various advantages of the original structure, such as a high boost factor of 6, self-balanced capacitor voltages, and reduced voltage ripples. Circuit description, operation principle, hybrid PWM modulation, and capacitor voltage ripples are analyzed and the feasibility of the proposed inverters is finally verified by experimental results.

A 13-level inverter based on switched-capacitor technique is proposed in this work. It consists of ten transistors, four diodes and four capacitors with self-balanced voltages. The ten transistors form two H-bridges and one half bridge resulting in simple structure and easy design of gate drivers. With a hybrid of level-shifted and phase-shifted PWM algorithm, voltage ripples of capacitors and low harmonic components of output voltage are suppressed simultaneously. Compared with the existing solutions, the proposed 13-level inverter has simpler structure and the lower cost per level. Experimental results demonstrate that the proposed inverter has the advantages of high boosting factor, self-balanced capacitor voltages, low harmonics and high efficiency. And the maximum efficiency is up to 97.2%.

This paper proposes a novel T-type multilevel inverter (MLI) based on the switched-capacitor technique. The proposed inverter not only achieves that the maximum voltage stress of the switches is less than the input voltage but also has a voltage boost capability, which makes it suitable in high voltage applications. It is worth mentioning that the proposed inverter features two topology extension schemes which help it achieve a higher output level and voltage gain. With the merit of low voltage stress and reduced power devices, a seven-level inverter can be achieved using only two capacitors. Moreover, capacitor voltage self-balancing capability can simplify the complexity of the circuit and control. The topology, operating principle, modulation strategy and analysis of the capacitor of the inverter are presented. The superiorities of the proposed inverter are investigated by comparing with recently proposed hybrid MLIs and switched-capacitor MLIs. Finally, a seven-level prototype is constructed to validate the correctness of the theoretical analysis and the feasibility and effectiveness of the proposed inverter.

To overcome the problem that the balancing performance of existing switched-capacitor (SC) cell balancing systems drops along with the increase in the number of series-connected battery cells, a novel SC cell balancing circuit is presented in this paper. The same as other SC balancing systems, only a pair of complementary square-wave signals is required to control the proposed circuit. With resonant SC design, all switches employed in the proposed balancing circuit operate under zero-current switching. The equivalent model is derived to reveal the balancing performance of the proposed balancing circuit. The system feasibility and theoretical analysis are verified by both of simulation and experimental results.